Xerox Phaser 7700 Optimizing Print Quality

Getting

the Best

Print Quality

All trays in the printer require a paper setting. The default is laser paper, 60-90 g/m2 (16-24 lb. bond). If you
load any other paper weight or type, you must set that new paper at the front panel. Printing with the wrong
setting can cause print-quality problems or damage the fuser.

Print the Menu Map

More help pages and diagnostic procedures are listed on
the printer's Menu Map under the Printable Pages

Menu.

At the Front Panel:

Scroll to

1

"Printable Pages"

Calibrate colors

Color balance can be tuned at the printer's front panel by
following the procedure outlined on the Tutorial Page.
Highlight, mid-tone, and shadow adjustments can be
made.

Load trays with the correct weights

MPT

60 g/m2 – 220 g/m

16 – 28 lb. bond
50 – 80lb. cover
100 – 110 lb. index

2

Use only Xerox
Phaser® 7700
transparency film.

Tray 1

60 g/m2 – 169 g/m

16 – 40 lb. bond
50 – 60 lb. cover
65 – 90 lb. index

Tray 2, 3, 4

60 g/m2 – 105 g/m

16 – 28 lb. bond

Tray 2

60 g/m2 – 105 g/m

16 – 28 lb. bond

Tray 3, 4

75 g/m2 – 105 g/m

20 – 28 lb. bond

Do not use glossy
inkjet paper, or
non-laser glossy
paper. Fuser damage
may result.

Check the Paper Tips Page

2

Press "OK"

For detailed information on supported papers, weights,
and front panel settings print the built-in Paper Tips

Page

3

PHASER 7700
READY TO PRINT

Xxxxxxx

Printable Pages

Xxxxx Xxxxxxxxx
Xxxxxxxxx

Scroll to
"Print Menu Map"

Calibrate for paper

To tune your printer for a particular brand or grade of
paper follow the steps on the Calibrate for Paper Pages.

2

2

2

2

Scroll to

1

"Printable Pages"

Press "OK"

2

3

Scroll to
"Print Paper Tips Page"

Press "OK"

4

Printable Pages

Xxxxxxx Xxxxxxxx

Print Paper Tips Page

Xxxxxxxxx Xxxxxxx

Xxxxxxxx Xxxxxxxxxxx

Press "OK"

4

Front panel buttons

Up Arrow

Cancel
Printing

Back

OK

Information

This may also be necessary if the temperature or
humidity changes significantly.

PhaserSMART

PhaserSMART is an automated printer diagnostic and
troubleshooting tool that uses your internet connection and a
web browser.

To access PhaserSMART via the web: go to www.phaserSMART.com, and
then enter your printer's IP address.

To launch PhaserSMART fromCentreWare IS: From a web browser, enter
your printer's IP address. Select Support. Select the Technical Support link
to access PhaserSMART.

To launch PhaserSMART from a Windows computer: From your Phaser
7700 printer driver Properties dialog box, select the Troubleshooting tab.
Select the Technical Support web link. www.PhaserSMART.xerox.com

TM

Down Arrow