Xerox D95-D110-D125 with built-in controller, D95-D110-D125 with EX Print Server, D95-D110-D125 with FreeFlow Print Server, D95A-D110-D125 with built-in controller, D95A-D110-D125 with EX Print Server User Manual

...

Version 1.1 May 2012

Xerox® D95/D110/D125 Copier/Printer

PDL Reference Guide

Adobe® and PostScript® are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

BR1460

Table of Contents

Table of Contents ................................................................................................. iii

Overview ................................................................................................................... 1

Using this Guide ..................................................................................................... 3

PostScript Fonts ..................................................................................................... 5

PCL ............................................................................................................................ 7

PCL/PJL Implementation .................................................................................... 9

PJL Template ........................................................................................................ 13

Sample PJL Headers .......................................................................................... 15

PCL/PJL Feature Dependencies/ Caveats .................................................. 17

PCL Fonts ............................................................................................................... 19

iii PDL Reference Guide

Overview

This document enables you to access the extended features of the D95/D110/D125 and in environments that do not have a custom driver.

NOTE: Some of the commands and syntax used in this document requires some familiarity with either PostScript® (PS) or Printer Command Language (PCL).

This document provides the Printer Description Language (PDL) commands and syntax for each feature. The following items are also included:

・

A PS table that describes the PS features the Copier/Printer supports and the syntax to use the feature.

・

A PCL tables that describes the PCL features the Copier/Printer supports and the syntax to use the feature.

This document is not intended to be a complete PS or PCL reference manual. It is a guide for using the PS and PCL commands with Copier/Printer.

Refer to these additional reference materials PostScript Language Reference Manual, Third Edition, ISBN 0-201-38922-8, PCL5 Printer Language Technical Reference Manual, HewlettPackard Manual and Printer Job Language Technical Reference Manual, Hewlett-Packard Manual.

PDL Reference Guide 1

2 PDL Reference Guide

Using this Guide

1. Search the Feature Table to determine whether the feature you wish to use is supported.

2. Verify that the feature is supported by the platform. For example, the Copier/Printer must have the Finisher option installed to use stapling commands.

3. Following across the table to find the syntax listed for the PDL examples shown. Read the Dependencies/Caveats section.

PDL Reference Guide 3

4 PDL Reference Guide

PostScript Fonts

The following PS fonts are resident with Adobe® interpreter:

New Century Schoolbook

Albertus Gill Sans Italic

Albertus Italic Gill Sans Bold

Albertus Light Gill Sans Bold Italic

Antique Olive Roman Gill Sans Light NewYork

Antique Olive Italic Gill Sans Light Italic OCR-B Letterpress M

Antique Olive Bold Gill Sans Extra Bold Optima Roman

Antique Olive Compact Gill Sans Condensed Optima Italic

Apple Chancery Gill Sans Condensed Bold Optima Bold

Arial Goudy Oldstyle Optima Bold Italic

Arial Italic Goudy Oldstyle Italic Oxford

Arial Bold Goudy Bold Palatino Roman

Arial Bold Italic Goudy Bold Italic Palatino Italic

ITC Avant Garde Gothic Book Goudy Extra Bold Palatino Bold

ITC Avant Garde Gothic Book Oblique Helvetica Palatino Bold Italic

ITC Avant Garde Gothic Demi Helvetica Oblique Stempel Garamond Roman

ITC Avant Garde Gothic Demi Oblique Helvetica Bold Stempel Garamond Italic

Bodoni Roman Helvetica Bold Oblique Stempel Garamond Bold

Bodoni Italic Helvetica Narrow

Bodoni Bold Helvetica Narrow Oblique Symbol

Bodoni Bold Italic Helvetica Narrow Bold Tekton Regular

Helvetica Narrow Bold

Bodoni Poster

Bodoni Poster Compressed Helvetica Condensed Times Italic

ITC Bookman Light

ITC Bookman Light Italic Helvetica Condensed Bold Times Bold Italic

ITC Bookman Demi

ITC Bookman Demi Italic Hoefler Text Times New Roman Italic

Carta Hoefler Text Italic Times New Roman Bold

Chicago Hoefler Text Black

Oblique Times Roman

Helvetica Condensed Oblique Times Bold

Helvetica Condensed Bold Oblique Times New Roman

Italic

New Century Schoolbook Bold

New Century Schoolbook Bold Italic

Stempel Garamond Bold Italic

Times New Roman Bold Italic

PDL Reference Guide 5

Clarendon Roman Hoefler Text Black Italic Univers 45 Light

Clarendon Bold Hoefler Ornaments Univers 45 Light Oblique

Clarendon Light Joanna Univers 55

Cooper Black Joanna Italic Univers 55 Oblique

Cooper Black Italic Joanna Bold Univers 65 Bold

Copperplate Gothic 32BC Joanna Bold Italic Univers 65 Bold Oblique

Copperplate Gothic 33BC Letter Gothic Univers 57 Condensed

Univers 57 Condensed

Coronet Letter Gothic Slanted

Oblique

Courier Letter Gothic Bold Univers 67 Condensed Bold

Univers 67 Condensed Bold

Courier Oblique Letter Gothic Bold Slanted

Oblique

Courier Bold ITC Lubalin Graph Book Univers 53 Extended

Courier Bold Oblique

ITC Lubalin Graph Book Oblique

Univers 53 Extended Oblique

Eurostile Medium ITC Lubalin Graph Demi Univers 63 Extended Bold

Eurostile Bold

ITC Lubalin Graph Demi Oblique

Univers 63 Extended Bold Oblique

Eurostile Extended No. 2 Marigold Wingdings

Eurostile Bold Extended No. 2 Monaco

ITC Zapf Chancery Medium Italic

Geneva ITC Mona Lisa Recut ITC Zapf Dingbat

New Century Schoolbook

Gill Sans

Roman

6 PDL Reference Guide

PCL

This Copier/Printer supports PCL5e and PCL XL Color emulations that enable the features listed in the following table:

Feature Description Job Name Job Name

Custom Paper Size This command specifies the customer designated

media size.

Media Size This command specifies the size of media on which

to print the job.

Media Source This command specifies the tray to supply the job’s

media.

Output Location Indicates the output bin where the print job is sent.

Stapling This command indicates use and location of

staple(s).

Punch This command indicates hole punches for a print job

on a device with hole punch capability.

Folding This command indicates to fold the print job.

Booklet This command enables you to print documents as

small booklets. The pages are reordered sequentially and are oriented so that when they are folded, the paging is correct.

Quantity Use this command to specify the number of collated

sets of a document.

Resolution This command sets the resolution value.

Bits Per Pixel This command sets the color depth value.

Copies Use this command to specify the number of

uncollated sets of a document in a print job.

Simplex Deliver one-sided output

Duplex Deliver two-sided output

Orientation Landscape or Portrait

Force Short Edge Feeding The values indicate the feed edge to use.

Job Mode Specify Job Mode

Job Type (Secure Print / Proof Print / Box Print)

Interleaving Paper (Transparency Separator)

Job Based Accounting

Auditron

Delay Print Delays printing a job until the time specified by the

You can specify Confidential Print or Proof Print

Insert blank sheet between OHP sheets.

command.

PDL Reference Guide 7

8 PDL Reference Guide

Feature

Implementation

Values

Job Name

Where jobname

string is a maximum of 32

Custom Paper Size

Not in PJL command.

Width of Custom Paper is specified by

Media Size

@PJL SET PAPER = value

Where value is one of the following:

PCL/PJL Implementation

This section describes the PCL commands for specific features. This table lists each feature and the PCL syntax that is required to use the feature. Following this table are examples of how to use these commands and what the PCL file looks like.

Refer to these reference materials: PCL5 Printer Language Technical Reference Manual and Printer Job Language Technical Reference Manual, Hewlett-Packard Manual.

＠

PJL SET JOBNAME = “jobname-string”

characters Exclude [”](22H) character

You have to specify by PCL : <ESC>&l101A

<ESC>&f#Iwhere # = decipoints for (100 -

330)mm. Length of Custom Paper is specified by <ESC>&f#J where # = decipoints for (148 -

488)mm. For instance:

4.25-inch x 5.5-inch will give <ESC>&f3060I3960J by

4.25-inch x 720 decipoints/inch = 3060 and

5.5-inch x 720 decipoints/inch = 3960.

A5 = A5 (148 x 210mm) † A4 = A4 (210 x 297mm) A3 = A3 (297 x 420mm) † JISB5 = B5 (182 x 257mm) JISB4 = B4 (257 x 364mm) STATEMENT = Statement (5.5 x 8.5") † EXECUTIVE = Executive (7.25 x 10.5") † LETTER = Letter (8.5 x 11") JISEXEC = 8.5 x 13" LEGAL = Legal (8.5 x 14") LEDGER = Tabloid (11 x 17") SPECIALA4 = Special A4(226x310mm) † DT_SPECIALA3 = DT Special A3(310 x 432mm) † 12X18 = Oversized Tabloid (12 x 18") † SA3 = SRA3 (320 x 450mm) † 126X192 = 12.6 x 19.2”(320x488mm) † 13X18 = 13 x 18”(330.2x457.2mm) † 13X19 = 13 x 19”(330.2x482.6mm) †ROC16K = 16K (194 x 267mm) † ROC8K = 8K (267 x 388mm) † 16KAIGCO = 16K (195 x 270mm) † 8KAIGCO = 8K (270 x 390mm) †

†: Whether each paper is available depends on NV memory setting.

The following paper sizes are only available with Bypass tray. A6 = A6 (105 x 148mm) JISB6 = B6 (128 x 182mm) 8X10 = 8 x 10" SPANISH = 215 x 315mm 11X15 = 11 x 15" A4COVER = A4 Cover (223 x 297mm)

PDL Reference Guide 9

Feature

Implementation

Values

LETTERCOVER

= 9 x 11"

<ESC>&l int A

Where value is one of the following:

Media Source

@PJL SET MEDIASOURCE = value

Where value is one of the following:

<ESC>&l int H

Where int is one of the following:

Output Location

@PJL SET OUTBIN = value

Where value is one of the following:

<ESC>&l int G

Where int is one of the fo

llowing:

Stapling

@PJL SET STAPLE = value

Where value is one of the following:

JPOST = Postcard (100 x 148mm) JPOSTD = Postcard (148 x 200mm) POSTCARD = Postcard (4 x 6") 50X70 = 5 x 7"

25 = A5 (148 x 210mm) † 26 = A4 (210 x 297mm) 27 = A3 (297 x 420mm) 45 = B5 (182 x 257mm) 46 = B4 (257 x 364mm) 41 = Statement (5.5 x 8.5") † 1 = Executive (7.25 x 10.5") † 2 = Letter (8.5 x 11") 18 = 8.5 x 13" 3 = Legal (8.5 x 14") 6 = Tabloid (11 x 17") 224 = Special A4(226x310mm) † 213 = Oversized Tabloid (12 x 18") † 197 = SRA3 (320 x 450mm) † 219 = 16K (194 x 267mm) † 220 = 8K (267 x 388mm) †

†: Whether each paper is available depends on NV memory setting.

The following paper sizes are only available with Bypass tray. 24 = A6 (105 x 148mm) 44 = B6 (128 x 182mm) 208 = 8 x 10" 43 = 215 x 315mm 217 = 11 x 15" 200 = A4 Cover (223 x 297mm) 201 = 9 x 11" 71 = Postcard (100 x 148mm) 72 = Postcard (148 x 200mm) 216 = Postcard (4 x 6") 204 = 5 x 7"

TRAY1: Feed from paper tray1 TRAY2: Tray2 TRAY3: Tray3 TRAY4: Tray4 TRAY5: Tray5 (Bypass)TRAY6: Tray6 TRAY7: Tray7

0: Feed paper from default tray 4: Tray1 1: Tray2 5: Tray3 8: Tray4 20: Auto 2 or 3: Tray5 (Bypass) 21: Tray6 22: Tray7 39: Tray8(Interposer)

MAINTRAY3: finisher top trayOUTBIN101: Finisher tray BOOKLETTRAY: booklet tray FOLDERTRAY: folder tray

0: Automatic Selection 1: Main tray 4: finisher top tray 6: Finisher tray

TOPDUAL

10 PDL Reference Guide

Feature

Implementation

Values

TOPLEFT

TOPRIGHT

Punch

@PJL SET

PUNCH

= value

Where value

1 is one of the following:

Folding

@PJL S

ET JOBATTR = "@FOLD = value1"

Where value

1 is one of the following:

Booklet

@PJL SET JOBATTR = “@

BKLT = value

1”

Where value

1 is one of the following:

Quantity

@PJL SET QTY = int

Where int is:

Resolution

@PJL SET RESOLUTION

= value

Where value is one of the following:

Bits Per Pixel

@PJL SET BITSPERPIXEL = value

Where value is one of the following:

Copies

@PJL SET COPIES = int

Where int is:

<ESC>&l int X

Where int is:

Simplex

@PJL SET DUPLEX = value1

Where value1 is one of the following:

<ESC>&l int S

Where int is one of the following:

Duplex

@PJL SET DUPLEX = value1

Where va

lue1 is one of the following:

BOTTOMDUAL BOTTOMLEFT BOTTOMRIGHT LEFTDUAL RIGHTDUAL SADDLE TOPQUAD BOTTOMQUAD LEFTQUAD RIGHTQUAD NONE

@PJL SET JOBATTR = ”@PNHN = value2”

@PJL SET JOBATTR = “@BKSG = value2”

@PJL SET JOBATTR = “@BKDN = int1”

@PJL SET JOBATTR = “@BKTP = int2”

TOP RIGHT LEFT BOTTOM NONE Where value2 is one of the following: TWO: 2 holes THREE: 3 holes FOUR: 4 holes

BIFOLDINSIDE ：Bi-Folding(single page) BIFOLDMULTIOUTSIDE：Bi-Folding(multi page) The "Collated" feature needs to enabled for the

booklet functions to work.

NONEDIVIDE : Compile a booklet as long as the number of sheet does not exceed the limit AUTODIVIDE : Divide sheets into sets automatically in case of exceeding the limit number of sheets. MANUALDIVIDE : Divide sheets based on the specified limit manually OFF : Do not compile a booklet

Where value2 is one of the following: RIGHT : Right to left page order binding LEFT : Left to right page order binding

Where int1 is: 1-9999 : Booklet dividing number for each set

Where int2 is: 1-9999 : Booklet total pages of document

PDL Reference Guide 11

@PJL SET BINDING = value2

1-999 (If you use this parameter, it also indicate use collate mode automatically.)

600 1200

1: 1 bit per pixel (per plane)

1-999 (This parameter used for uncollated mode.)

1-999

OFF: simplex

0: simplex

ON: duplex Where value2 is one of the following: LONGEDGE SHORTEDGE (value2 is used combined with value1=ON)

Feature

Implementation

Values

<ESC>&l int S

Where int is one of the following:

Orientat

ion @PJL SET ORIENTATION = value

Where value is one of the following:

<ESC>&l int O

Where int is one of the following:

Force short edge

@PJL SET PAPERDIRECTION

= value

Where value is one of the following:

Job Mode

@PJL JOB MODE = value

Where value is one of the following:

Job Type

@PJL SET HOLD = value

Where valu

e1 is one of the following:

Interleaving Paper

@PJL SET SLIPSHEET = value

Where value is one of the following:

Job Based Accounting

@PJL SET JOBATTR = “@JOAU = string1”

Where string1 is a maximum of 32 character

Auditron

ditto ditto

Delay Print

@PJL SET JOBATTR = “@PRTM =

YYYY:MM:DD:hh:mm

Banner Sheet

@PJL SET JOBATTR=

Where value is one of the following:

1: Duplex Long Edge Binding 2: Duplex Short Edge Binding

PORTRAIT LANDSCAPE

0: Portrait 1: Landscape 2: Reverse Portrait 3: Reverse Landscape

feeding

(Secure Print / Proof)

(Transparency Separator)

@PJL SET HOLDKEY = "string"

@PJL SET JOBATTR = “@JOAP = string2”

@PJL SET JOBATTR = “@DAID = string3”

SEF: Short Edge Feed LEF: Long Edge Feed

PRINTER: for Printer

PROOF: proof print STORE: confidential print (secure print)

The HOLDKEY variable acts as a password without encryption to protect a held job. string is a maximum of 16 character (legal value 20H-FFH) as password without encryption. The default value is “”. When “”(empty string) is specified, no password is required.

OFF: no slipsheet BLANK: blank slipsheet COPY: imaged slipsheet

(legal value: 20H-7EH) as job owner (Capital character & small character is distinguished)

Where string2 is a maximum of 12 character (legal value: 20H-7EH) as password without encryption. It can be null (zero length string)

Where string3 is a maximum of 32 character (legal value 20H-7EH) as account ID. It can be null (zero length string)

YYYY:MM:DD:hh:mm”

“@BANR=value”

YYYY: year(AD 2000～2099) MM: month (1～12) DD: day (1～31) hh: hour(0～23) mm: minute(0～59)

START: start sheet DEVICE: depend on device setting OFF: no banner sheet

12 PDL Reference Guide

PJL Template

This section illustrates a standard PJL template that is used to access general print features as well as Copier/Printer Product specific features. This template lists each feature and the syntax, both PCL commands and PJL, required to use these features. The next section of this document contains other examples of how to use these commands.

Section 1 (Opening Command, Required for all files)

<ESC>%-12345X@PJL JOB MODE=PRINTER

Section 2 (PJL Set Commands)

@PJL SET RESOLUTION=600 @PJL SET COPIES=1

Section 3 (PCL Code used to invoke PCL Language)

@PJL ENTER LANGUAGE=PCL

Section 4 (PCL Data Stream or ASCII Document inserted here for Options such as selection Different Fonts, Simplex, Duplex, etc.)

,,,,,,,,,,

Section 5 (Closing Command, Required at end of Document)

<ESC>%-12345X@PJL EOJ

PDL Reference Guide 13

14 PDL Reference Guide

Sample PJL Headers

Example 1 Simple Print

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL COMMENT Beginning PCL Job<CR><LF> @PJL SET OUTBIN=MAINTRAY<CR><LF> @PJL SET QTY=1<CR><LF> @PJL SET RESOLUTION=600<CR><LF> @PJL SET JOBATTR=”@JOAU=Nagaoka” <CR><LF>

Example 2 Finishing Options (Stapling)

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=OUTBIN101<CR><LF> @PJL SET FINISH=ON<CR><LF> @PJL SET STAPLE=TOPLEFT<CR><LF>

Example 3 Finishing Options (Punch)

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=OUTPIN101<CR><LF> PJL SET FINISH=ON<CR><LF> @PJL SET PUNCH=LEFT<CR><LF> @PJL SET JOBATTR="@PNHN=TWO"<CR><LF>

Example 4 Finishing Options (Saddle stapling and folding)

It is an example of division in every 5 sheets.

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=BOOKLETTRAY<CR><LF> @PJL SET FINISH=ON<CR><LF> @PJL SET STAPLE=SADDLE<CR><LF> @PJL SET JOBATTR="@FOLD=BIFOLDMULTIOUTSIDE"<CR><LF> @PJL SET JOBATTR="@BKLT=MANUALDIVIDE"<CR><LF> @PJL SET JOBATTR="@BKSG=LEFT"<CR><LF> @PJL SET JOBATTR="@BKDN=5"<CR><LF>

Example 5 Finishing Options (Bi-Folding(multi page))

It is an example of division in every 5 sheets.

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=BOOKLETTRAY<CR><LF> @PJL SET FINISH=NONE<CR><LF> @PJL SET STAPLE=NONE <CR><LF> @PJL SET JOBATTR="@FOLD=BIFOLDMULTIOUTSIDE"<CR><LF> @PJL SET JOBATTR="@BKLT=MANUALDIVIDE"<CR><LF> @PJL SET JOBATTR="@BKSG=LEFT"<CR><LF> @PJL SET JOBATTR="@BKDN=5"<CR><LF>

PDL Reference Guide 15

@PJL SET QTY=1<CR><LF>

Example 6 Finishing Options (Bi-Folding(single page))

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET OUTBIN=BOOKLETTRAY<CR><LF> @PJL SET FINISH=NONE<CR><LF> @PJL SET STAPLE=NONE <CR><LF> @PJL SET JOBATTR="@FOLD=BIFOLDINSIDE"<CR><LF> @PJL SET JOBATTR="@BKSG=LEFT"<CR><LF>

Example 7 Proof Print

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET HOLD=PROOF <CR><LF> @PJL SET USERNAME="John" <CR><LF> @PJL SET JOBNAME="Job1" <CR><LF>

Example 8 Confidential (Secure) Print without encryption

Password: 1234

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET HOLD=STORE <CR><LF> @PJL SET HOLDKEY="1234"<CR><LF> @PJL SET USERNAME="John" <CR><LF> @PJL SET JOBNAME="Job1" <CR><LF>

Example 9 Banner Sheet

banner : start sheet

@PJL SET JOBATTR=”@BANR=START”<CR><LF> @PJL SET JOBATTR=”@BCMT=Banner Comment String”<CR><LF>

Example 10 Job Based Accounting & Auditron

userID:Patricia, Password: none, accountID: none

<ESC>%-12345X@PJL JOB MODE=PRINTER<CR><LF> @PJL SET JOBATTR=”@JOAU=Patricia”<CR><LF> @PJL SET JOBATTR=”@JOAP=”<CR><LF> @PJL SET JOBATTR=”@DAID=”<CR><LF>

16 PDL Reference Guide

PCL/PJL Feature Dependencies/ Caveats

All PJL commands must be in the first 2,500 bytes of the job.

To combine printer escape commands (not including PJL commands):

The first two characters after the <esc> MUST be the same.

All alpha characters MUST be lowercase, except the final terminating character.

The commands are read left to right. Combine commands in the order you wish them to execute.

For example, combine print 5 copies (<ESC>&|5X) and use letter size (<ESC>&|2A) as <ESC>&|5x2A.

In case of duplicate commands, the last one requested takes precedence.

The @PJL SET COPIES takes precedence over the PCL Escape Command (<ESC>& | int X>) to set copies. In general, a PJL command takes precedence over a PCL command.

Valid media sizes for duplexing are between 139.7 x 182.0mm and 330.0 x 488.0mm.

Valid media sizes for stapling include A4 (210 x 297mm), A3 (297 x 420mm), B5 (182 x 257mm), B4 (257 x 364mm), Executive (7.25 x 10.5"), 8 x 10", Letter (8.5 x 11"), 215 x 315mm,

8.5 x 13", Legal (8.5 x 14"), 11 x 15", Tabloid (11 x 17"), A4 Cover, 9 x 11", Special A4(226x310mm), 16K (194 x 267mm), 8K (267 x 388mm), 16K (195 x 270mm), 8K (270 x 390mm) for Finisher D.

PDL Reference Guide 17

18 PDL Reference Guide

PCL Fonts

The following PCL fonts are resident.

Each of these commands references a 12-point font. If you wish to use any other point size, change the 12v to the desired size (.25 – 999.75).

The commands listed use the default symbol set, Roman-8. To change the symbol set, you include the alternate symbol set after the first <ESC> and before the second <ESC>. Use the line printer examples as a reference.

Font Name PCL Escape Command

Albertus Medium <esc>(<esc>(s1p12v0s1b4362T

Albertus Extra Bold <esc>(<esc>(s1p12v0s4b4362T

Antique Olive <esc>(<esc>(s1p12v0s0b4168T

Antique Olive Bold <esc>(<esc>(s1p12v0s3b4168T

Antique Olive Italic <esc>(<esc>(s1p12v1s0b4168T

Arial <esc>(<esc>(s1p12v0s0b16602T

Arial Bold <esc>(<esc>(s1p12v0s3b16602T

Arial Italic <esc>(<esc>(s1p12v1s0b16602T

Arial Bold Italic <esc>(<esc>(s1p12v1s3b16602T

CG Times <esc>(<esc>(s1p12v0s0b4101T

CG Times Bold <esc>(<esc>(s1p12v0s3b4101T

CG Times Italic <esc>(<esc>(s1p12v1s0b4101T

CG Times Bold Italic <esc>(<esc>(s1p12v1s3b4101T

CG Omega <esc>(<esc>(s1p12v0s0b4113T

CG Omega Bold <esc>(<esc>(s1p12v0s3b4113T

CG Omega Italic <esc>(<esc>(s1p12v1s0b4113T

CG Omega Bold Italic <esc>(<esc>(s1p12v1s3b4113T

Clarendon Condensed <esc>(<esc>(s1p12v4s3b4140T

Coronet <esc>(<esc>(s1p12v1s0b4116T

Courier <esc>(<esc>(s1p12v0s0b4099T

Courier Bold <esc>(<esc>(s1p12v0s3b4099T

Courier Italic <esc>(<esc>(s1p12v1s0b4099T

Courier Bold Italic <esc>(<esc>(s1p12v1s3b4099T

Garamond Antiqua <esc>(<esc>(s1p12v0s0b4197T

Garamond Halbfett <esc>(<esc>(s1p12v0s3b4197T

Garamond Kursiv <esc>(<esc>(s1p12v1s0b4197T

Garamond Kursiv Halbfett <esc>(<esc>(s1p12v1s1b4197T

Line Printer (Roman-8) <esc>(8U<esc>(s0p16.67h8.5v0s0b0T

Line Printer (Latin-1) <esc>(0U<esc>(s0p16.67h8.5v0s0b0T

PDL Reference Guide 19

Font Name PCL Escape Command

Line Printer (PC-8) <esc>(10U<esc>(s0p16.67h8.5v0s0b0T

Line Printer (PC-8 D/N) <esc>(11U<esc>(s0p16.67h8.5v0s0b0T

Line Printer (PC-850) <esc>(12U<esc>(s0p16.67h8.5v0s0b0T

Line Printer (Legal) <esc>(1U<esc>(s0p16.67h8.5v0s0b0T

Marigold <esc>(<esc>(s1p12v0s0b4297T

Times New <esc>(<esc>(s1p12v0s0b16901T

Times New Bold <esc>(<esc>(s1p12v0s3b16901T

Times New Italic <esc>(<esc>(s1p12v1s0b16901T

Times New Bold Italic <esc>(<esc>(s1p12v1s3b16901T

Symbol <esc>(19M<esc>(s1p12v0s0b16686T

Wingdings <esc>(579L<esc>(s1p12v0s1b31402T

Univers Bold <esc>(<esc>(s1p12v0s3b4148T

Univers Bold Italic <esc>(<esc>(s1p12v1s3b4148T

Univers Bold Condensed <esc>(<esc>(s1p12v4s3b4148T

Univers Bold Condensed Italic <esc>(<esc>(s1p12v5s3b4148T

Univers Medium <esc>(<esc>(s1p12v0s0b4148T

Univers Medium Italic <esc>(<esc>(s1p12v1s0b4148T

Univers Medium Condensed <esc>(<esc>(s1p12v4s0b4148T

Univers Medium Condensed Italic <esc>(<esc>(s1p12v5s0b4148T

Letter Gothic <esc>(<esc>(s1p12h0s0b4102T

Letter Gothic Italic <esc>(<esc>(s1p12h1s0b4102T

Letter Gothic Bold <esc>(<esc>(s1p12h0s3b4102T

Times Roman <esc>(<esc>(s1p12h0s3b4102T

Times Italic <esc>(<esc>(s1p12h0s3b4102T

Times Bold <esc>(<esc>(s1p12h0s3b4102T

Times Bold Italic <esc>(<esc>(s1p12h0s3b4102T

Helvetica <esc>(<esc>(s1p12v0s0b24580T

Helvetica Oblique <esc>(<esc>(s1p12v1s0b24580T

Helvetica Bold <esc>(<esc>(s1p12v0s3b24580T

Helvetica Bold Oblique <esc>(<esc>(s1p12v1s3b24580T

CourierPS <esc>(<esc>(s0p12h0s0b24579T

CourierPS Oblique <esc>(<esc>(s0p12h1s0b24579T

CourierPS Bold <esc>(<esc>(s0p12h0s3b24579T

CourierPS Bold Oblique <esc>(<esc>(s0p12h1s3b24579T

SymbolPS <esc>(19M<esc>(s1p12v0s0b45358T

Palatino Roman <esc>(<esc>(s1p12v0s0b24591T

Palatino Italic <esc>(<esc>(s1p12v0s0b24591T

Palatino Bold <esc>(<esc>(s1p12v0s0b24591T

Palatino Bold Italic <esc>(<esc>(s1p12v0s0b24591T

20 PDL Reference Guide

Font Name PCL Escape Command

ITC Bookman Light <esc>(<esc>(s1p12v0s-3b24623T

ITC Bookman Light Italic <esc>(<esc>(s1p12v1s-3b24623T

ITC Bookman Demi <esc>(<esc>(s1p12v0s2b24623T

ITC Bookman Demi Italic <esc>(<esc>(s1p12v1s2b24623T

Helvetica Narrow <esc>(<esc>(s1p12v4s0b24580T

Helvetica Narrow Oblique <esc>(<esc>(s1p12v5s0b24580T

Helvetica Narrow Bold <esc>(<esc>(s1p12v4s3b24580T

Helvetica Narrow Bold Oblique <esc>(<esc>(s1p12v5s3b24580T

New Century Schoolbook Roman <esc>(<esc>(s1p12v0s0b24703T

New Century Schoolbook Italic <esc>(<esc>(s1p12v1s0b24703T

New Century Schoolbook Bold <esc>(<esc>(s1p12v0s3b24703T

New Century Schoolbook Bold Italic <esc>(<esc>(s1p12v1s3b24703T

ITC Avant Garde Book <esc>(<esc>(s1p12v0s0b24607T

ITC Avant Garde Book Oblique <esc>(<esc>(s1p12v1s0b24607T

ITC Avant Garde Demi <esc>(<esc>(s1p12v0s2b24607T

ITC Avant Garde Demi Oblique <esc>(<esc>(s1p12v1s2b24607T

ITC Zapf Chancery Medium Italic <esc>(<esc>(s1p12v1s0b45099T

ITC Zapf Dingbats <esc>(<esc>(s1p12v0s0b45101T

PDL Reference Guide 21

Xerox D95-D110-D125 with built-in controller, D95-D110-D125 with EX Print Server, D95-D110-D125 with FreeFlow Print Server, D95A-D110-D125 with built-in controller, D95A-D110-D125 with EX Print Server User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual