Copyright protection claimed includes all forms of matters of copyrightable materials and information now allowed
by statutory or judicial law or hereinafter granted, including without limitation, material generated from the software
programs which are displayed on the screen such as styles, templates, icons, screen displays, looks, etc.
Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the
copyright laws.
The PaperPort
®
Adobe
®
and OmniPage® brand name and logo are registered trademarks of Nuance Communications, Inc.
, Adobe® Acrobat®, Adobe® Reader®, and the Adobe® PDF logo are registered trademarks of Adobe
Systems Incorporated in the United States and/or other countries. The Adobe PDF logo will appear in this product’s
software, and full access to Adobe software features is only available if an Adobe product is installed on your
computer.
®
Post-It
Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows™ is a trademark and SharePoint
is a registered trademark of 3M in the United States and/or other countries.
Information is subject to change without notice and does not represent a commitment on the part of Visioneer. The
software described is furnished under a licensing agreement. The software may be used or copied only in accordance
with the terms of such an agreement. It is against the law to copy the software on any medium except as specifically
allowed in the licensing agreement. No part of this document may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
or translated to another language, for any purpose other than the licensee's personal use and as specifically allowed
in the licensing agreement, without the express written permission of Visioneer.
Restricted Rights Legend
Use, duplication, or disclosure is subject to restrictions as set forth in contract subdivision (c)(1)(ii) of the Rights in
Te c hn i c a l D a t a a n d C o m pu t e r S o f t w ar e C la u s e 52 . 2 2 7- FA R 1 4 . Material scanned by this product may be protected by
governmental laws and other regulations, such as copyright laws. The customer is solely responsible for complying
with all such laws and regulations.
Changes are periodically made to this document. Changes, technical inaccuracies, and typographic errors will be
corrected in subsequent editions.
•Environmental Health and Safety Contacts on page 17
1
Xerox® DocuMate® 3115
User’s Guide
9
Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as
needed to ensure the continued safe operation of your machine.
Yo ur Xe ro x p ro du ct a n d su pp li es ha ve be en d e si gn ed an d t es te d to m ee t s t ri ct s a fe ty r eq ui re m en ts .
These include safety agency evaluation and certification, and compliance with electromagnetic
regulations and established environmental standards.
WARNING:
The safety and environment testing and performance of this product have been verified using Xerox materials
only. Unauthorized alterations, which may include the addition of new functions or connection of external
devices, may impact the product certification. Please contact your Xerox representative for more information.
10
Xerox® DocuMate® 3115
User’s Guide
Operational Safety Information
Yo ur Xe ro x eq ui pm e nt a nd su pp l ie s h av e be e n de si gn ed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To en s u re t h e c o nt in u ed s af e o p e ra t i on o f y o u r X e ro x equipment, follow these safety guidelines at all
times:
Do These
•Always follow all warnings and instructions that are marked on or supplied with the equipment.
•Always use materials specifically designated for this product, the use of other materials may result
in poor performance and create a hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
•Always exercise care when moving or relocating equipment.
•Always locate the machine on a solid support surface that has adequate strength to support the
weight of the machine.
•Always locate the machine in an area that has adequate ventilation and room for servicing.
•Always unplug this equipment from the electrical outlet before cleaning.
NOTE: Your Xerox machine is equipped with an energy saving device to conserve power when the
machine is not in use. The machine may be left on continuously.
Do Not Do These
•Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground
connection terminal.
•Never attempt any maintenance function that is not specifically described in this documentation.
•Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
•Never locate the machine near a radiator or any other heat source.
•Never override or “cheat” any of the electrical or mechanical interlock devices.
•Never place this equipment where people might step on or trip on the power cord.
Caution: This device is not intended for use in the direct field of view at visual display workplaces.
To a v o id i nc o m m o di n g re f l e ct i o n s a t v i s u al d is p l a y w o r kp l a c e s this device must not be placed in the direct field of
view.
Xerox® DocuMate® 3115
User’s Guide
11
Electrical Information
Warning - Electrical Safety Information
1.The power receptacle for the machine must meet the requirements stated on the data plate on
the rear of the machine. If you are not sure that your electrical supply meets the requirements,
please consult your local power company or an electrician for advice.
2.The socket outlet shall be installed near the equipment and shall be easily accessible.
3.Use the power cable that is supplied with your machine. Do not use an extension cord or remove
or modify the power cord plug.
4.Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure
whether or not an outlet is correctly grounded, consult an electrician.
5.Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a ground
connection terminal.
6.Do not place this equipment where people might step or trip on the power cable.
7.Do not place objects on the power cable.
8.Do not override or disable electrical or mechanical interlock devices.
9.Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
Electrical Supply
•This product shall be operated from the type of electrical supply indicted on the product’s data
plate label. If you are not sure that your electrical supply meets the requirements, please consult
your local power company for advice.
•Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet
checked by a qualified electrician.
WARNING: This equipment must be connected to a protective earth circuit.
This equipment is supplied with a plug that has a protective earth pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace
the outlet.
12
Xerox® DocuMate® 3115
User’s Guide
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the machine
as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable
from the electrical outlet.
Xerox® DocuMate® 3115
User’s Guide
13
Emergency Power Off
If any of the following conditions occur, turn off the machine immediately and disconnect the power
cable(s) from the electrical outlet(s).
•The equipment emits unusual odors or makes unusual noises.
•The power cable is damaged or frayed.
•A wall panel circuit breaker, fuse, or other safety device has been tripped.
•Liquid is spilled into the machine.
•The machine is exposed to water.
•Any part of the machine is damaged.
14
Xerox® DocuMate® 3115
User’s Guide
Maintenance Information
1.Any operator product maintenance procedures will be described in the user documentation
supplied with the product.
2.Do not carry out any maintenance on this product which is not described in the customer
documentation.
3.Do not use aerosol cleaners. The use of cleaners that are not approved may cause poor
performance of the equipment, and could cause a dangerous condition.
4.Use supplies and cleaning materials only as directed in this manual.
5.Do not remove covers or guards that are fastened with screws. There are no parts behind these
covers that you can maintain or service.
6.Do not perform any maintenance procedures unless you have been trained to do them by an
authorized local dealer or unless a procedure is specifically described in the user manuals.
Xerox® DocuMate® 3115
User’s Guide
15
Product Safety Certification
This product is certified by the following Agency using the Safety standards listed:
Standard
UL60950-1 (USA)
CSA 22.2 No. 60950-1 (Canada)
IEC 60950-1
16
Xerox® DocuMate® 3115
User’s Guide
Environmental Health and Safety Contacts
Contact Information
For mo re informatio n on E nviro nment, He alth, an d Safety in relation to this Xerox product and supplies,
please contact the following customer help lines:
USA & Canada:1-800-828-6571
Europe:+44 1707 353 434
Xerox® DocuMate® 3115
User’s Guide
17
18
Xerox® DocuMate® 3115
User’s Guide
Welcome
This chapter includes:
•What’s in the Box on page 20
•System Requirements on page 21
•Documentation on page 22
•The Xerox DocuMate 3115 Scanner on page 23
Congratulations on purchasing your Xerox DocuMate 3115. With this scanner you can quickly scan
stacks of single-sided or double-sided pages and place their electronic images on your computer.
2
Xerox® DocuMate® 3115
User’s Guide
19
What’s in the Box
DocuMate 3115 Scanner
Installation DiscsTechnical
Support Card
Quick Install Guide
Power Supply
USB Power Cord
Replacement
ADF Pad
Power Cord
USB Cable
Docking Station
(Optional)
Before starting the software installation, please check the contents of the box to make sure that all
parts are included. If any items are missing or damaged, contact the dealer where you purchased the
scanner.
20
Xerox® DocuMate® 3115
User’s Guide
System Requirements
Pentium 4 PC or AMD equivalent with:
•A DVD-ROM drive
•An available Universal Serial Bus (USB) port
®
•Microsoft
•32-bit Windows XP (Service Pack 1 and 2)
•32-bit or 64-bit Windows Vista (Service Pack 1)
•32-bit or 64-bit Windows 7
•32-bit or 64-bit Windows 8
The scanner is compatible with Service Pack 3 for Windows XP, Service Pack 2 for Windows Vista,
and Service Pack 1 for Windows 7.
•Minimum of 2 gigabyte (GB) of internal memory (RAM)
•350 MB minimum of free hard disk space
A VGA or SVGA Monitor:
•The recommended settings for your monitor are:
•Color quality of 16-bit or 32-bit
•Resolution set to at least 800 x 600 pixels
Windows® operating system:
Refer to your Windows documentation for instructions on setting the color quality and resolution for
the monitor.
Xerox® DocuMate® 3115
User’s Guide
21
Documentation
The following printed documentation is provided in the box:
•Installation guide—abbreviated scanner setup and installation instructions.
•
Te ch n ic al su p po r t c ar d —contact information for technical support and customer service, and a
brief overview of our standard product warranty.
Warranty card—the warranty card is provided for users in Russia and should be filled in as
•
described on the card. For all other users, please dispose of this card in paper recycling.
The following soft-copy documentation is available on the installation disc:
•Scanner user’s guide—contains detailed installation, configuration, scanning, and maintenance
instructions.
•
Nuance PaperPort user’s guide—contains detailed information using the application and managing
your scanned documents.
•
Nuance OmniPage user’s guide—contains detailed instructions on using the software, including
information on using Optical Character Recognition to create editable text files from the scanned
documents.
•
Nuance PDF Converter user’s guide—contains detailed information on using the application to
create and modify PDF files.
22
Xerox® DocuMate® 3115
User’s Guide
The Xerox DocuMate 3115 Scanner
3
Paper Guides
Cover Release
Input Tray
Control Panel
41
5
2
Front Feed TrayOutput Tray
8
67
1
2
3
4
5
6
7
8
Power JackUSB Port
Input Tray—Holds a stack of documents in the scanner. Unfolds to support various paper lengths.
Paper guides—Adjust to support various document widths.
Front Feed tray—
Output tray—Holds documents after being scanned.
Control panel—OneTouch scanning controls.
Power Switch & Scan Settings Dial—Turn the dial to the right to turn on the scanner power.
Numbers 1-6 represent the 6 OneTouch scan settings.
Status Light—Shows the scanner’s current status.
OneTouch Scanner Buttons—Press the Simplex or Duplex button to initiate scanning using the
scan settings for the current dial number.
Cover release—Opens the scanner cover.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Power jack—Connects the power cord to the scanner.
Open to feed items through the front of the scanner.
Xerox® DocuMate® 3115
User’s Guide
23
24
Xerox® DocuMate® 3115
User’s Guide
Scanner Setup
This chapter includes:
•Unpack and Assemble the Scanner on page 26
•Connect the Scanner Power Cord on page 28
•Detach or Attach the Xerox DocuMate 3115 on page 30
3
Xerox® DocuMate® 3115
User’s Guide
25
Unpack and Assemble the Scanner
1.Remove the scanner from its protective foam and plastic bag.
2.Remove the tape and protective foam strips from the scanner body and input tray.
3.Lift the paper guide up from the scanner body. Push the tray back until it clicks in place.
If the tray isn’t fully seated in position, paper feeding from the input tray may jam in the scanner.
4.Pull the scanner cover release to open the scanner. Remove the foam strip from the inside of the
scanner. Close the cover when you are done.
5.Detach the scanner body from the docking station and remove the foam strip from the docking
station.
1.Press and hold the release button on the side of the docking station.
2.Tilt the scanner body towards the front and lift the scanner out of the Docking Station.
3.Remove the tape and foam strip from the docking station.
26
Xerox® DocuMate® 3115
User’s Guide
4.Place the scanner body back on the docking station.
Detailed instructions for detaching and attaching the scanner are on page 30.
6.Unfold the Input Tray and Extension from the paper guide.
7.Pull the output tray away from the bottom of the Docking Station, then flip open the output tray
extension.
Xerox® DocuMate® 3115
User’s Guide
27
Connect the Scanner Power Cord
Yo u ca n p ow er t he s c an ne r th r ou gh t he s ta nd a rd p ow er cord to a wall outlet, or use the USB power cord
to power the scanner through a USB port on the computer.
Connect the Scanner Power to the Wall
1.Plug the power supply into the power port on the scanner.
NOTE: Only use the power supply (either HEG42-240100-7L made by HiTron or DA-24C24 made by
ADP) included with your scanner. Connecting any other type of power supply may damage your
scanner, and will void its warranty.
2.Plug the power cord into the power supply and into a wall outlet.
28
Xerox® DocuMate® 3115
User’s Guide
Connect the Scanner Power to the Computer
1.Plug the round end of the USB power cord into the power jack on the scanner.
2.Plug the flat end of the USB power cord into an available USB port on the back of the computer.
We do not recommend using a USB hub to power the scanner.
NOTE: Only use the USB power cable included with your scanner. Connecting any other type of USB
power cable may damage your scanner, and will void its warranty. If you do not have your USB power
cable, you can order a new one by contacting our Customer Service department. Please refer to the
Te c h ni c a l S up p o r t C a r d , i n c l u d ed w it h y o u r s c a n ne r , for our company contact information, or visit the
Parts & Accessories page for your scanner at www.xeroxscanners.com.
Xerox® DocuMate® 3115
User’s Guide
29
Detach or Attach the Xerox DocuMate 3115
The Xerox DocuMate 3115 scanner body can be removed from the Docking Station to be used as a
mobile scanner.
Detach the Scanner Body from the Docking Station
1.Press and hold the release button on the side of the Docking Station.
2.Tilt the scanner body towards the front of the Docking Station to release the scanner from the
arms in the Docking Station.
Yo u ca n r el e as e th e b ut to n o n t he D o ck i ng S ta ti on .
3.Set the scanner body on the desk.
30
Xerox® DocuMate® 3115
User’s Guide
Loading...
+ 434 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.