Xerox 3040 User Manual
XEROX 3040
Engineering Copier
The most fully featured two-roll
wide-format copier in the industry today.
Come visit us on the World Wide Web.
www.XES.com
The right solution.
You shouldn’t have to settle for just any engineering
copier. You should have a reprographic solution that’s just
right for your specific business needs. The Xerox 3040
Engineering Copier is the newest member of the Xerox 3000
wide-format copier family– it’s convenient, easy to use, and
delivers presentation-quality copies.
Productivity-enhancing features.
The 3040 optimises machine speed. Its two-roll media
supply system automatically switches to the next media roll
when the first is depleted, so jobs can run uninterrupted.
That’s especially important when you’re copying large jobs
or preparing collated sets for fast-approaching deadlines. And
the 3040’s control panel with dual-language message display
makes it easy for everyone to just walk up and start copying.
Top performance from a mid-volume copier.
The 3040 always gives you excellent quality prints,
whether you’ve programmed a standard job, a partial copy,
or a special format size. The 3040’s on-board electronic
Auditron ensures that your copies will always be charged
to the correct project or job. If your print requirements regularly
include different media types and format sizes, the Xerox
3040 is a great choice for you– a reliable, top-quality selection
from the Xerox 3000 engineering copier family.
XEROX ENGINEERING SYSTEMS
All of these choices are yours.
From Xerox Engineering Systems.
Only Xerox Engineering Systems brings you the power of
the Xerox 3000 family of wide-format copiers. The Xerox 3000
engineering copiers offer the right combination of features,
value, and productivity for engineering reprographics. Our
products continue to be the industry benchmark for reliability,
ease of use, and quality copies.
XEROX® and Auditron® are trademarks of Xerox Corporation. Xerox 3040® is a trademark of XESystems, Inc.
The digital box and the acronym XES are trademarks of XESystems,Inc.
Copyright © 1998 XESystems. All rights reserved. 708P83772WDE 05/99
For more information on the Xerox 3040 Engineering
Copier, please contact your nearest Xerox Engineering
Systems sales representative, visit www.XES.com, call
+44 (0) 1635 517322, or fax +44 (0)1635 517392.
DOCUMENT INPUT
Maximum size 914 mm x 6.1 m long in single copy mode;
914 mm x 1524 mm long in multicopy mode
Minimum size 210 mm x 279 mm (portrait)
Types Opaque, translucent, and transparent
documents
Thickness Up to 3.18 mm thick
PRODUCTIVITY
Warm-up time 3 minutes or less from a cold start
60 seconds or less from power-saver
10 seconds or less from standby
First Copy Out Less than 20 seconds A1 size (610 mm x 914 mm)
Time (FCOT)
Rated speed 4.56 linear meters per minute
Copy throughput
3 A0 size (841 mm x 1189 mm) per minute;
(multiple copy mode)
6 A1 size (594 mm x 841 mm) per minute;
8 A2 size (420 mm x 594 mm) per minute
Multiple copies Selectable, 1 to 15 copies per document
MEDIA
Type 80 gsm Bond paper; 90 gsm Tracing paper;
100 micron Film
Supply Roll stock selectable from either of two online
feed rools; each with capacity up to
914mm x 175 m for paper media
(914mm x 100 m film)
Manual bypass for special media applications
POWER REQUIREMENTS
230V AC/10amp - 50Hz or
115V VAC /20amp 60Hz
PHYSICAL CHARACTERISTICS
Product size Height 1473 mm; Width 1448 mm;
Depth 686 mm; Weight 268.2 kg
KEY FEATURES
• Auto media switch for next available roll when roll in use is depleted.
• On-board electronic Auditron with capacity for 250 individual accounts
in three modes: access control, assigned account, copy inhibit.
• Interactive dual-language message display communicates status of
copier and instructions for operation and maintenance.
• Two online media feed rolls and manual bypass.
• Dual Language Capability
ACCESSORIES
Document Catch Tray
Product specifications subject to change without notice.
XEROX 3040 ENGINEERING COPIER
SPECIFICATIONS
Your XES Representative is:
Loading...