Xerox 3030 User Manual
PLAIN-PAPER PRODUCTIVITY
WHEN YOU NEED IT...
WHEREYOU NEED IT.
XEROX 3030 ENGINEERING COPIER
The Xerox 3030 Engineering Copier
The Xerox 3030 Engineering Copier is a point-of-need plainpaper copier that's compact, aesthetically pleasing and
environmentally friendly. The 3030 gives you walk-up
convenience, automatic operation and a clear, easy-to-use
graphic interface.
Copy from original drawings, bluelines, sepias, CAD plots and
cut-and-tape composites onto bond, vellum or film - up to 15
copies from a single feed. Select automatic synchrocut or key in
specific cut length. Make size-for-size copies up to 36 inches
wide by any manageable length at a speed of four D-size copies
per minute.
Roll-fed media loading is quick and easy. There's a manual
bypass for feeding cutsheet media. And our standard copy stacker
and optional document stacker enhance operator efficiency.
Remember, your productivity is directly related to the flow of
engineering information. With the 3030, drawing elements can
be updated via cut-and-tape editing methods to form new
concept drawings quickly, right in the drawing room. Drawings
can be restored to "like new" condition, with the added storage
and handling benefits of plain-paper media. The 3030 gives you
added control of copy quality in terms of contrast and density.
With a 3030 at your point of need, you can make sure the vital
flow of engineering information won't bog down.
•
Point of need convenience
•
Compact and user friendly
•
Improve your productivity
XEROX 3030 ENGINEERING COPIER
DOCUMENT INPUT
Maximum size 36" x 20' long in single copy mode;
36" x 60" long multicopy mode
Minimum size 8 1/2" x 11" (portrait)
Types Opaque, translucent and transparent
documents
Note A document carrier (8R3628) is
recommended for damaged or very delicate
documents
Thickness Up to 1/8" thick
PRODUCTIVITY
Warm-up time Less than 3 minutes from a cold start
First Copy Less than 20 seconds D size (24" x 36")
Out Time (FCOT)
Copy throughput 2 E size (36" x 48") per minute;
(multiple copy mode) 4 D size (24" x 36") per minute;
6 C size (18" x 24") per minute
Multiple copies Selectable, 1-15 copies per document
MEDIA
Type 20 lb. xerographic bond, 20 lb. xerographic
Zero Solvent vellum and .004 drafting film
Supply Roll stock selectable from one on-line feed
roll; either 36" x 500' bond or vellum or
36" x 150' .004 drafting film
Manual bypass for special media applications
POWER REQUIREMENTS
115 VAC/20 amp dedicated line
PHYSICAL CHARACTERISTICS
Product size Height 46.25"; Width 57"; Depth 27"; Weight
500 lbs.
Installation space 105" x 87"
KEY FEATURES
• Interactive dual-language message display communicates the status
of the copier and display instructions for operation and maintenance.
• On-board electronic Auditron with capacity for 250 individual
accounts in three modes: access control, assigned account,
copy inhibit.
• Partial copy enables users to reproduce only the data they need for
a particular task. Only the portion containing the required data will
be reproduced which will reduce the time and expense for
reproduction.
• In the "Sets" mode, prints are delivered in sequence to the copy
stacker conveniently located in front of the 3030, all ready to either
bind or staple.
ACCESSORIES
Data Shuttle (requires shuttle installation kit); Work Organizer; Long
Document Guide; Portable Data Printer; Document Stacker
Agency approvals: UL and CSA
XES offers a broad array of media, toner and consumables designed
to work with all brands of wide format equipment.
Product data subject to change without notice.
Xerox®, Auditron®, 3030, the digital box icon
and the acronym XES are trademarks of Xerox
Corporation. ©XESystems, Inc. 2000. 08/00
Printed on recycled paper. 610P62002
Your nearest XES authorized reseller is:
Come visit us on the World Wide Web
www.XES.com
All of these choices are yours. From Xerox Engineering Systems.
Only Xerox Engineering Systems brings you the power of the Xerox
3000 family of wide-format copiers. The Xerox 3000 engineering copiers
offer the right combination of features, value, and productivity for
engineering reprographics. Our products continue to be the industry
benchmark for reliability, ease of use, and quality copies.
Work Organizer (optional).
Convenient storage tray for
copies enhances operator
efficiency; provides easier
handling of prints.
Loading...