WTE PF5002, PF5004, PF5006, PF5008, PF5010 Datasheet
...
WTE
POWER SEMICONDUCTORS
PF5000 – PF5010
50A 1/2" PRESS-FIT DIODE
Features
!
Diffused Junction
!
Low Leakage
!
Low Cost A
!
High Surge Current Capability
!
Typical I
Mechanical Data
!
Case: All Copper Case and Components
Hermetically Sealed D
!
Terminals: Contact Areas Readily Solderable
!
Polarity: Cathode to Case(Reverse Units Are C
Available Upon Request and Are Designated G
By An “R” Suffix, i.e. PF5002R or PF5010R)
!
Polarity: Red Color Equals Standard, E
Black Color Equals Reverse Polarity
!
Mounting Position: Any F
R
less than 10µA
DO-21
Dim Min Max
A
15.63 16.14
B
12.75 12.83
C
8.89 10.04
D
1.25 1.30
E
3.05 3.30
F
5.59 6.1
G
28.82 —
All Dimensions in mm
B
Maximum Ratings and Electrical Characteristics
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol PF5000 PF5001 PF5002 PF5004 PF5006 PF5008 PF5010 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage V
Average Rectified Output Current @TA = 150°C I
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
Forward Voltage @IF = 100A V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @T
Typical Junction Capacitance (Note 1) C
Typical Thermal Resistance Junction to Case
(Note 2)
Operating and Storage Temperature Range TJ, T
= 100°C
A
RRM
V
RWM
V
R
V
R(RMS)
O
FSM
I
FM
RM
I
R
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
j
JC
STG
@TA=25°C unless otherwise specified
50 A
500 A
1.08 V
10
500
300 pF
1.2 K/W
-65 to +175 °C
µA
*Glass passivated forms are available upon request
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
PF5000 – PF5010 1 of 2 © 2002 Won-Top Electronics
ORDERING INFORMA TION
Product No. Package Type Shipping Quantity
PF5000 Press Fit 100 Units/Tray
PF5001 Press Fit 100 Units/Tray
PF5002 Press Fit 100 Units/Tray
PF5004 Press Fit 100 Units/Tray
PF5006 Press Fit 100 Units/Tray
PF5008 Press Fit 100 Units/Tray
PF5010 Press Fit 100 Units/Tray
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone:
Fax:
Email:
Internet:
PF5000 – PF5010 2 of 2 © 2002 Won-Top Electronics
: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
886-7-822-5408 or 886-7-822-5410
886-7-822-5417
sales@wontop.com
http://www.wontop.com
We power your everyday.
Loading...