World Dryer VMax V User Manual [en, es, fr]

VMax

High-Speed Vertical Hand Dryer

Secamanos vertical de alta velocidad

Sèche-mains vertical haute vitesse

All V Series

Todos los modelos de la serie V
Série V complète

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or service the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage. Retain instructions for future reference.

Por favor lea y guarde estas instrucciones. Léalas cuidadosamente antes de tratar de montar, instalar, operar o dar mantenimiento al producto aquí descrito. Protéjase usted mismo y a los demás
observando toda la información de seguridad. No seguir las instrucciones puede ocasionar daños, tanto corporales como materiales. Guarde estas instrucciones para referencia en el futuro.

Lire et conserver ces instructions. Les lire attentivement avant de commencer à assembler, à installer, à faire fonctionner ou à entretenir l’appareil décrit. Pour se protéger et protéger autrui,
observer toutes les consignes de sécurité. Négliger de se conformer à ces instructions peut causer des blessures personnelles et/ou des dommages matériels. Conserver ces instructions
pour références ultérieures.

World Dryer Corporation

5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
800-323-0701
www.worlddryer.com

1

Description

World air hand dryer is a surface-mounted ADA (American Disabilities Act) compliant dryer powered by a universal brush

motor, and delivers 1200 watts of drying power. The dryer incorporates a replaceable HEPA lter and replaceable odor

neutralizing tablet. An infrared sensor is used to automatically activate the dryer. These models are intended for use in

commercial, industrial, ofce and public facility environments.

Electrical Specications

Table 1

Models Type Electrical Input Rated Amperage Rated Watts Certications

V-XXXA Automatic 120V, 60 Hz 10.0A 1200

General Safety Information

DANGER Failure to disconnect the power source before installation or servicing can result in serious injury or death from electric shock.

• Always disconnect the power source before servicing or installing the hand dryer.

WARNING Risk of re, electric shock, personal injury or property damage are possible if local codes, or safety recommendations

are not followed.

• Use only for drying hands as intended by the manufacturer. Do not use hand dryer for any purpose other than drying hands.

• Carefully follow all instructions for installation on the enclosed mounting template / instructions.

• Installation should only be performed by qualied persons in compliance with all applicable federal, state and local codes and standards.

• When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

• Always connect to a branch circuit with circuit breaker or fuse protection with an electrical rating greater than the model hand
dryer’s rated amperage shown in Table 1 - Electrical Specications in accordance with the NEC (National Electrical Code) and/or

CEC (Canadian Electrical Code).

• Use only the electrical power (voltage and frequency) specied for the model hand dryer being installed. See Table 1 - Electrical
Specications

• Each hand dryer must have a dedicated circuit.

• For indoor use only. Do not use outdoors. Do not expose to rain, sun or extreme temperatures. Do not use near sources of water
or extreme heat.

• Repair work should only be performed by World Dryer or World Dryer authorized service representatives.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction conceming use of the appliance by a person

responsible for their safety.

WARNING Risk of re, electric shock, personal injury or property damage are possible if the following safety precautions are not followed.

• Do not use hand dryer for any purpose other than drying hands.

• Repair work should only be performed by World Dryer or World Dryer authorized service representatives. Only use genuine

replacement parts.

• Do not insert foreign objects in or on the unit.

• Do not place heavy objects on the unit.

• Do not use in corrosive environments.

• Do not use in explosive atmospheres.

• Do not use in extremely humid locations or near sources of water.

• Do not immerse appliance in water or other liquid.

• Children should be supervised not to play with the appliance.

• Unplug or disconnect from the power supply before servicing.

• Do not operate with a damaged cord or plug. Discard or return to a World Dryer authorized service facility for examination and/or

repair.

• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture
or appliances. Arrange cord away from trafc area and where it will not be tripped over.

WARNING This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug

is intended to t in a polarized outlet only one way. If the plug does not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do not attempt to defeat this safety feature. Do not modify the plug in any way.

WARNING When you dispose of an old appliance or any components, follow any local and national laws on disposal of electronic

waste. This appliance must not be disposed together with the domestic waste. This appliance has to be disposed at an authorized
place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and
make sure the product is disposed in an environmental friendly and healthy way.

2

Unpacking / Standard Accessories

1. Remove all packing material. Recycling is recommended.

2. Carefully remove the hand dryer from the shipping carton, using care not to drop
the appliance.

3. Inspect carefully for any damage that may have occurred during transit. Check for
any loose, missing or damaged parts. If the hand dryer is damaged or missing
parts, promptly inform the dealer where you purchased it or contact World Dryer
at 1-800-323-0701.

Standard items included with the hand dryer are:

Cleaning Brush

User Manual

Installation Template

Manual

HEPA Filter Cartridge with Odor

Neutralizing Tablet

Wall Mounting Bracket with

mounting anchors

Installation

CAUTION Improper mounting could result in personal injury or property damage.

1. Ensure the selected installation location provides sufcient reach for the hand dryer’s power cable to a 120VAC,

60 Hz polarized wall outlet.

2. Use the mounting template provided to mark the locations for the (4) wall mounting anchors to attach the wall
mounting bracket to the wall.

3. It is recommended that at least 1 of the 4 mounting anchors for the unit be fastened into a wall stud or support.

4. To use the hollow wall anchors included with the wall mounting kit, pre-drill the wall in the marked locations using

a 5/16” (8mm) drill, insert the plastic anchors and tap ush to the wall.

5. Complete the attachment of the wall mounting bracket to the wall with the (4) mounting anchors using a No.

25 torx screwdriver.

6. Hang the hand dryer on the bracket. Remove water collection tray from bottom of dryer, and complete the
attachment of the dryer with the 4th anchor.

7. Replace the water collection tray.

8. Plug the power cord into a 120VAC, 60 Hz polarized wall outlet.

3

How to Use

1. The hand dryer will start automatically when hands are inserted.

2. Slowly move your hands up and down through the air stream for 10 – 12 seconds.

3. The hand dryer will stop automatically after hands are removed.

Dryer Controls

The hand dryer is equipped with an ON/OFF Power Switch and Speed Control Switch for quieter operation if desired.

The factory setting for the Speed Control Switch is “HIGH”. Both the ON / OFF Power Switch and Speed Control Switch

are located inside the dryer - above the water collection tray. To access, remove the water collection tray and intake air

pre-lter and locate the ON / OFF Power Switch and Speed Control Switch as shown in the gure below.

Note: The hand dryer includes an anti-vandal lock for securing the water collection tray and HEPA lter. The lock is

located immediately below the water collection tray. To remove the water collection tray or HEPA lter, slide the lock to

the left to the “unlocked” position. After servicing, slide the lock to the right to the “locked” position.

LED Display

The LED display provides information about the operation and

servicing needs of the hand dryer.

• LED’s 1 through 4 ash Green when dryer is in operation.

• LED 5 is solid Green when dryer is in standby mode; solid Blue

when dryer is in operation.

• LED 6 is unlit during normal operation; ashing Red when
HEPA lter requires replacement.

• LED 7 is unlit during normal operation; solid Blue when water

collection tank needs emptying.

Maintenance and Cleaning Instructions

Cleaning

• All surfaces of the hand dryer can be cleaned with a soft cloth and non-abrasive, non-caustic cleaning solution.

• Provided cleaning brush should be used for cleaning the drain hole in the bottom of the drying cavity.

Maintenance

Emptying the Water Collection Tray

1. The water collection tray will ll with water with hand dryer use.

2. Regularly check the water tank status on the LED display panel. The LED Display will indicate when the water
collection tray is full and needs emptying.

3. If water collection tray is not emptied when full, the collection tray will overow onto the oor. High washroom trafc

may require more frequent emptying of the water collection tray.

4. For optimum hygiene, routinely clean the water collection tray with a non-brasive, non-caustic cleaning solution.

4