Wolfgang SWPIKC30 User Manual

IMPORTANT NOTICE

Please read operating instructions before using this

product. Please keep original box and packing materials

in the event that service is required.

For questions or concerns please contact customer service at:

Synergy Housewares, LLC.

Toll-free: 866-444-4033

Hours: M-F 8:30am-5:00pm EST

Printed in China

Model SWPIKC30

USE AND CARE

IMMERSION PROCESSOR DICER

Wolfgang Puck is a trademark of Wolfgang Puck Worldwide

Actual product may differ slightly from image on this page

Model SWPIKC30

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of ﬁre, electric shock and/or injury to persons, including the following:

14 When mixing liquids, especially hot liquids, use a tall container or make

small quantities at a time to reduce spillage, splattering and possibility of injury from burning.

15 The metal blending shaft and whisk may scratch or mark non-stick coatings.

Do not use in non-stick cookware.

1 To protect against risk of electrical shock, do not put Motor Housing, cord

or plug of the appliance in water or other liquid.

2 Blades are sharp. Handle carefully when removing, inserting or cleaning.

Exercise the same care when removing, inserting the chopping blade or disc for the food processor and chopper accessories. Always verify that the accessory enclosure is free of cracks or other damages.

3 The appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.

4 Unplug from outlet when not in use, before putting on or taking off parts,

and before cleaning. To unplug, grasp plug and pull from electrical outlet. Never pull cord.

5 Avoid contacting blades or moving parts.

6 Keep hands and utensils out of the container while blending to prevent the

possibility of severe injury to persons or damage to the unit. A scraper may be used but must be used only when the unit is not running.

7 Do not operate any appliance with a damaged cord or plug or after the

appliance malfunctions or is dropped or damaged in any manner. Return the appliance to an authorized service facility for examination, repair, or electrical or mechanical adjustment. The use of attachments not recommended or sold by the appliance manufacturer may cause ﬁre, electric shock, or injury.

8 The maximum electrical rating occurs when using Food Processor Bowl,

the electrical rating may be less when using other attachments.

9 Do not use outdoors or for anything other than its intended purpose.

16 Be certain the work bowl lid is securely locked in place before operating

appliance. Do not attempt to remove work bowl lid until blade has stopped rotating.

17 Check work bowl for presence of foreign objects before using.

18 All blades are extremely sharp. Use extreme care when removing or

replacing blades

19 Be certain the Food Processor Cover is securely locked in place before

operating appliance.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

Additional Safety Information

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt in a polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to defeat this safety feature.

Before Your First Use

CAUTION: The blades are very sharp. Use care when handling.

Carefully unpack the unit and accessories then remove all packaging materials. Clean your appliance according to the Care & Cleaning section of this manual.

10 Do not let any cord hang over the edge of the table or counter. Do not let

cord contact hot surfaces, including stovetop.

11 Mixing ﬂammable non-food substances can be harmful.

12 Remove any packaging materials and promotional labels before using the

appliance for the ﬁrst time.

13 The use of attachments/accessories not sold or recommended by the

manufacturer may cause ﬁre, electrical shock or risk of injuries to persons.

1 2

Table of Contents

Important Safeguards ......................................................................1

Additional Safety Information ................................................... 2

In the beginning, there was Wolfgang Puck. There were cooks and there were kitchens and there were people eating food, but the world had never seen anything like Spago— with its California cuisine, its casual elegance, and its chef whose genuine warmth and love of craft redeﬁned the dining experience. And they came—from LA and from everywhere—to experience the future. Wolfgang Puck shaped the modern culinary landscape: he was the ﬁrst celebrity chef, the inventor of fusion cuisine, the ﬁrst in farm-to-table. His work is inspired by California living, and an insistence on only the

freshest ingredients. From his legendary ﬁne dining icons, his entrepreneurial spirit has built an empire—from dining, to catering, to products for the home— touching the lives of millions around the globe. Today, as always, Chef Puck is earnestly, restlessly, tirelessly at work behind the scenes inventing what’s next. He is driven by a genuine love of his craft, a passion for what’s possible, and its potential to change the world.

Before Your First Use ..................................................................... 2

About Wolfgang Puck ................................................................... 3

Assembly and Use of Blending Rod/Wire Whisk ........... 5

Suggested Uses ................................................................................ 6

Blending Rod Helpful Hints ........................................................ 7

Assembly and Use of the Masher Attachment ................ 8

Know Your Parts ............................................................................... 9

Slicer/Shredder Assembly and Use ........................................11

Slicer/Shredder Disc Assembly ...............................................12

Dicer Assembly and Use .............................................................13

Dicer Assembly ................................................................................14

Food Processor with Chopper Assembly and Use .......15

Care and Cleaning ..........................................................................16

Recipes .................................................................................................17

Limited Warranty ..........................................................................30

Contact Information ............................................................... Back

3 4

Assembly and Use of Blending Rod/

Suggested Uses

Wire Whisk

• Ensure the MOTOR HOUSING is unplugged. Attach BLENDING ROD to the

MOTOR HOUSING by aligning the arrow symbol on the MOTOR HOUSING with the unlock symbol on the BLENDING ROD. Rotate the BLENDING ROD until the arrow symbol on the MOTOR HOUSING is over the lock symbol on the BLENDING ROD.

• If using the WIRE WHISK, ensure the Wire Whisk is fully seated into the

WIRE WHISK RECEPTACLE by pressing straight in until it stops. Attach the assembled WIRE WHISK to the MOTOR HOUSING by aligning the arrow symbol on the MOTOR HOUSING with the unlock symbol on the WIRE WHISK RECEPTACLE. Rotate the assembled WIRE WHISK RECEPTACLE until the arrow symbol on the MOTOR HOUSING is over the lock symbol on the WIRE WHISK RECEPTACLE.

• Place food in suitable container for mixing (MIXING BEAKER or other

bowl or stockpot). For best results solid foods should be no larger than 1/2-inch cubes.

• Plug into 120-volt 60 Hz AC only outlet.

• Immerse the BLENDING ROD or WIRE WHISK into your ingredients. Press

the desired SPEED BUTTON. You can only adjust the ADJUSTABLE SPEED DIAL when using the LOW SPEED BUTTON. Slowly move the BLENDING ROD or WIRE WHISK up, down and sideways through your ingredients.

• Note: Never lift the BLENDING ROD or WIRE WHISK out of your

ingredients while the unit is running to avoid splatter.

Note: At any time during the blending process, you can press the HIGH SPEED BUTTON to increase the blender to its maximum speed.

• Do not operate the motor continuously for more than one minute when

using the BLENDING ROD, simply pulse the selected speed to your desired consistency.

Function Speed

Beat cream, whip egg whites, puddings, sauces, frostings and other airy, foamy mixtures. When using, move BLENDING ROD up and down to draw air in. Use a tall, narrow container such as the MIXING BEAKER for best results when foaming milk, making cream and whipping egg whites.

Mix and stir shakes, drinks, omelet batters, sauces and emulsions. Use for pancake batter, gravies and dressings.

Cut, chop, and crush raw or cooked meat and hard vegetables. Grind cooked meat for use in recipes such as casseroles or chicken salad.

Chop, crush, and mash vegetables, and fruit for baby food, soups and sauces.

Low

Medium

to High

High

Medium

to High

Blending Rod/Wire Whisk

Adjustable Speed Dial

(for low speed setting only)

Low Speed Button

High Speed Button

Motor Housing

Wire Whisk Receptacle

Mixing

Beaker

• When you are ﬁnished, release the selected SPEED BUTTON, unplug the

MOTOR HOUSING, twist the selected blending attachment until the arrow on the MOTOR HOUSING is above the unlock symbol on the selected attachment.

5 6

Blending Rod

Wire

Whisk

Blending Rod Helpful Hints

Assembly and Use of the

• The BLENDING ROD can be used in hot liquids. Always use care when

using in hot liquids. To avoid splashing insert the BLENDING ROD into the pan ﬁrst, set the speed dial to “MIN”, then press the LOW SPEED BUTTON for operation, slowly raising the speed to your desired setting.

CAUTION: Do not tilt or lift the BLENDING ROD out of the pan while the motor is running, as a serious burn or injury can occur from food splatter.

• To puree foods, a certain amount of liquid is needed. Add cooking liquid,

broth, juice, milk, or cream, until desired consistency is reached.

• For thorough blending, move BLENDING ROD up and down in mixture until

smooth.

• You will achieve better mixing results if you use deep, tall containers.

• For easy cleanup, unplug the MOTOR HOUSING and rinse under running

water immediately after using.

• Before turning the appliance on, immerse the BLENDING ROD into the

prepared ingredients, thus ensuring they will not spill over.

• For greater efﬁciency, move the BLENDING ROD in small outward spiraling

circles while mixing.

• The BLENDING ROD cannot blend hard or ﬁbrous ingredients unless they

are in less than 1/2-inch pieces, soft ones into 1/2 to 1-inch pieces.

• Some foods require a small amount of liquid to allow them to move freely

around the blades. Soft or wetter foods require less liquid, while dry ingredients require more liquid. Add the liquid a little at a time until the mix gains the required consistency.

• When using the BLENDING ROD, ensure the blades are covered to avoid

splashing.

Masher Attachment

The MASHER is designed to process soft, cooked food. To avoid damaging the attachment do not attempt to process uncooked hard food. Always remove peels, seeds, nuts or any hard parts of fruits and vegetables before processing.

• Ensure the MOTOR HOUSING is unplugged. Attach the MASHER

GEARBOX to the MOTOR HOUSING by aligning the arrow symbol on the MOTOR HOUSING with the unlock symbol on the top of the MASHER GEARBOX. Rotate the MASHER GEARBOX until the arrow symbol on the MOTOR HOUSING is aligned with the lock symbol on the top of the MASHER GEARBOX.

• Attach the MASHER to the MASHER GEARBOX by aligning the arrow

symbol on the bottom of the MASHER GEARBOX with the unlock symbol on the MASHER. Rotate the MASHER GEARBOX until the arrow symbol on the bottom of the MASHER GEARBOX is aligned with the lock symbol on the MASHER.

• Attach the assembled MASHER to the MOTOR HOUSING by aligning the

arrow symbol on the MOTOR HOUSING with the unlock symbol on the top of the MASHER GEARBOX. Rotate the MASHER GEARBOX until the arrow symbol on the MOTOR HOUSING is aligned with the lock symbol on the top of the MASHER GEARBOX.

• Place the MASHER PADDLE over the MASHER SPINDLE on the bottom or

the MASHER. Turn counter-clockwise to lock into place.

• Plug into 120-volt 60 Hz AC only outlet.

CAUTION

• Never use the MASHER during the cooking process or while the pan

is over direct heat.

• Remove the cooking vessel from the heat and allow the cooking vessel

to cool slightly.

• Hold the cooking vessel with an oven mitt and begin to process your

food with the MASHER in your other hand.

• For consistent results never process food in a cooking vessel that is

more than half full. If necessary, process in batches.

• It is best to allow the MASHER to cool down in-between batches for

at least 3 minutes to avoid overheating the gears.

• Press and hold the LOW SPEED BUTTON and process your ingredients by

using a straight up and down motion until you reach your desired texture.

• Release the LOW SPEED BUTTON and unplug the MOTOR HOUSING

from the outlet.

• The MASHER PADDLE can be removed for cleaning by rotating it

clockwise.

• Remove the MASHER attachment from the MOTOR HOUSING by holding

the MOTOR HOUSING while turning the MASHER attachment until the arrow on the MOTOR HOUSING is aligned with the unlock symbol on the MASHER. Pull the MASHER attachment out of the MOTOR HOUSING.

7 8

+ 11 hidden pages