MANUALLY CONTROLLED GRIDDLES
Model VM24
Item #_____________ C.S.I. Section 11420
VOYAGER SERIES
BASIC MODELS:
VM24 24" wide, 1⁄2" thick, 60,000 BTU/hr.
VM36 36" wide,
VM48 48" wide,
VM60 60" wide, 3⁄4" thick, 150,000 BTU/hr.
VM72 72" wide, 1" thick, 180,000 BTU/hr.
KEY FEATURES:
➤ Designed for use with refrigerated bases.
➤ Stainless steel all welded frame, sides, control panel, top
rim, backsplash and grease trough.
➤ 4" adjustable stainless steel legs.
➤ 24" deep highly polished steel griddle plate.
1
➤ 5
⁄2" high stainless steel backsplash. Side splash tapers
forward to 2
1
➤ 3
⁄4" wide stainless steel front grease trough drains into
large capacity grease collector(s). (60" and 72" griddles
have two grease collectors.)
➤ One 30,000 BTU/hr. burner and one infinite heat control
valve per 12" of griddle width.
➤ Standing pilot ignition system.
3
➤
⁄4" rear gas connection and gas pressure regulator.
➤ One year limited parts and labor warranty.
1
⁄2" thick, 90,000 BTU/hr.
3
⁄4" thick, 120,000 BTU/hr.
3
⁄4".
MODEL: VOYAGER SERIES
Design Certified by the American Gas Association
Design Certified by the Canadian Gas Association
Listed by the National Sanitation Foundation
Approved by ______________________
Date: _____________________________
SPECIFY TYPE OF GAS AND FINISH WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
OPTIONAL FEATURES:
3
➤
⁄4" thick griddle plate on 24" and 36" wide models; 1" thick
griddle plate on 24", 36", 48" and 60" wide models.
➤ Milled grooving available on 1" thick plates in 12" increments.
➤ Two or four 30,000 BTU/hr. open burners, left or right, on
24", 36" and 48" models. Two open burners, left or right, on
60" models.
➤ Side grease collector(s). Drip edge and one grease collec-
tor on the left side. Adds 3" to the overall width. Grease
collectors on both sides. Adds 6" to the overall width.
➤ Chrome plated front guard rail.
➤ Cutting board with mounting brackets.
DESCRIPTION:
Manually controlled gas griddle, Wolf Model No. _______. Stainless steel front, sides, backsplash and welded frame. 4"
adjustable stainless steel legs. ____"w x 24"d x ____" thick
highly polished steel griddle plate. 5
back splash. Side splash tapers forward to 2
1
⁄2" high stainless steel
3
⁄4". 31⁄4" wide stainless steel front grease trough drains into large capacity grease
collector(s). One 30,000 BTU/hr. burner and one infinite heat
control valve per 12" of griddle width. Standing pilot ignition
system.
Exterior dimensions: _____"w x 31
3
⁄4" rear gas connection with gas pressure regulator.
3
⁄8"d x 9" working height on
4" legs.
Manually Controlled Griddles
F-39202 (10/98)
Wolf Range Company, LLC
19600 S. Alameda St., Compton, CA 90221-6291
P.O. Box 7050, Compton, CA 90240-7050
(310) 637-3737 • FAX (310) 637-7931 • (800) 366-WOLF
Customer Service (888) 639-9653
Voyager Series
Manually Controlled Griddles
INSTALLATION REQUIREMENTS:
1. A gas pressure regulator sized for this unit is included.
Natural Gas 5.0" W.C., Propane Gas 10.0" W.C.
2. An adequate ventilation system is required for commercial
cooking equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02289. When writing, refer to NFPA No.
96.
3. These units are manufactured for installation in accordance
with ANSZ223.1A (latest edition), National Fuel Gas Code.
Copies may be obtained from The American Gas Association, 1515 Wilson Blvd., Arlington, VA 22209.
4. Clearances: Combustible Non-combustible
Rear 6" 6"
Sides 6" 6"
SHOWN ON REFRIGERATED BASE
OVERALL WKG. GRIDDLE PLATE NO. OF TOTAL APPX. SHP.
MODEL WIDTH DEPTH HEIGHT HEIGHT DEPTH THICKNESS BURNERS BTU/HR. WT. (lbs/kg)
VM24 24" 313⁄8"13
VM36 36" 313⁄8"13
VM48 48" 313⁄8"13
VM60 60" 313⁄8"13
VM72 72" 313⁄8"13
NOTE: In line with its policy to continually improve its product, Wolf Range Company
reserves the right to change materials and specifications without notice.
This appliance is manufactured for commercial use only and is not intended for home use.
F-39202 (10/98)
1
⁄2" 9" 24"
1
⁄2" 9" 24"
1
⁄2" 9" 24"
1
⁄2" 9" 24"
1
⁄2" 9" 24" 1" 6 180,000 790/356
1
⁄2" 2 60,000 210/95
1
⁄2" 3 90,000 290/131
3
⁄4" 4 120,000 410/185
3
⁄4" 5 150,000 575/259