WOLF ICBSM15TF/S Datasheet
STEAMER MODULE
USE AND CARE GUIDE
CLEANING, MAINTENANCE, AND MORE
STEAMER MODULE
Contents
4 Safety Precautions
5 Steamer Module Features
6 Steamer Module Operation
13 Care Recommendations
14 Troubleshooting
15 Wolf Warranty
2 | Wolf Customer Care 800.222.7820
STEAMER MODULE
Customer Care
The model and serial number are printed on the enclosed
product registration card. Both numbers are also listed on
the product rating plate. Refer to page 5 for rating plate
location. For warranty purposes, you will also need the date
of installation and name of your authorized Wolf dealer.
Record this information below for future reference.
SERVICE INFORMATION
Model Number
Serial Number
Date of Installation
Certied Service Name
Certied Service Number
Authorized Dealer
Dealer Number
If your product ever needs attention, be sure to use a Wolf
Factory Certied Service provider recommended by our
customer care center, or select one from our list of providers
available at wolfappliance.com/locator. All Factory Certied Service providers are carefully selected and thoroughly
trained by us.
Important Note
To ensure this product is installed and operated as safely
and efciently as possible, take note of the following types
of highlighted information throughout this guide:
IMPORTANT NOTE highlights information that is especially
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
IMPORTANT NOTE: Throughout this guide, dimensions in
parentheses are millimeters unless otherwise specied.
wolfappliance.com | 3
SAFETY PRECAUTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT NOTE: Read all safety instructions
before using this appliance.
• Read this guide carefully before using this appli-
ance to reduce risk of re, electric shock or injury.
• This appliance must be properly installed and ser-
viced by a qualied installer, service agency or gas
supplier and grounded by a qualied technician.
WARNING
PROPOSITION 65 FOR CALIFORNIA RESIDENTS
Cancer and Reproductive Harm—
www.P65Warnings.ca.gov
GENERAL SAFETY PRECAUTIONS
• Always use dry pot holders. Wet or damp pot
holders can cause steam burns. Do not use a towel
or bulky cloth in place of pot holders.
• Do not leave children alone or unattended in the
area where this appliance is in use. Never allow
children to sit or stand on the appliance.
• Never leave this appliance unattended when in
use. Boilovers and greasy spills may smoke or
ignite.
• Do not use water on grease res. Smother
the ame or use a dry chemical or foam-type
extinguisher.
• Do not repair or replace any part of this appli-
ance unless specically recommended in literature
accompanying this appliance.
• Do not store or use gasoline or other ammable
vapors and liquids in the vicinity of this or any other
appliance.
• Do not heat unopened food containers, such as
baby food jars and cans. Pressure build-up may
cause the container to burst and cause injury.
SAVE THESE INSTRUCTIONS
4 | Wolf Customer Care 800.222.7820
STEAMER MODULE
Steamer Module Features
FEATURES
1
Product Rating Plate (bottom of module)
2
Control Panel
3
Control Panel Lock
4
Temperature Display
5
Timer Display
6
Drain Control
7
Glass Lid
8
Insert Pans
9
Steamer Basin
10
Water Level Lines
7
STEAMER MODULE ASSEMBLY
For storage, position the solid insert pan on top and place
both insert pans into the steamer basin with handles
aligned. Refer to the illustration below.
For stacked alignment, rotate the solid insert pan 90° to the
perforated insert pan.
7
8
4
5
9
10
3
6
Steamer module
2
Steamer module assembly
1
wolfappliance.com | 5
STEAMER MODULE OPERATION
Getting Started
We know you are eager to start cooking, but before you
do, please take some time to read this use & care guide.
Whether you are an occasional cook or an expert chef, it
will be to your benet to familiarize yourself with the safety
practices, features, operation and care recommendations
of your Wolf steamer module.
To ensure all residual oil from the manufacturing process
has been removed, clean the steamer module thoroughly
with hot water and a mild detergent prior to use. Rinse and
dry with a soft cloth. Refer to care recommendations on
page 13.
Sabbath
This appliance is certied by Star-K to meet strict religious
regulations in conjunction with specic instructions found
on www.star-k.org.
6 | Wolf Customer Care 800.222.7820
STEAMER MODULE OPERATION
Steamer Operation
CONTROL PANEL
The control panel features illuminated touch controls.
A power level indicator for the heating element displays the
heat setting from LO to HI. Refer to the illustration below.
Indicators on the control panel will illuminate to indicate
specic module operation. Refer to the chart below.
CONTROL PANEL INDICATORS
Control Panel Locked
Automatic Drain Open
Element On
Hot Water
Timer Set
CONTROL PANEL LOCK
The control panel lock feature prevents unwanted module
operation. Touch and hold LOCK for three seconds to lock
and unlock the control panel.
will illuminate when the
control panel is locked.
The control panel will automatically lock after 10 minutes
of inactivity. This automatic lock feature can be disabled
through the extended options menu. Refer to page 10.
When the module is powered up for the rst time and after a
power outage, the module will default to lock mode.
Control panel
wolfappliance.com | 7
STEAMER MODULE OPERATION
Steamer Operation
POWER LEVEL
When the heating element is activated, the power level
indicator will illuminate indicating the level of heat. The
lowest heat is represented by the small ame, varying levels
of heat by additional indicators (dots), and the highest heat
by all indicators including the large ame. Refer to the chart
below.
SETTING POWER LEVEL USES
Low 1–6 indicators Proong, melting chocolate.
Medium 6–7 indicators Warming foods, use as
chang dish, defrosting,
steaming bread.
Medium High 7-8 indicators Slow-cooking.
High 8–10 (large ame)
indicators
Steaming vegetables, rice,
etc.
POWER LEVEL INDICATOR
IMPORTANT NOTE:
Always ll the basin with water prior to
activating the steamer module.
Setting controls:
1 To activate the steamer module, touch ON/OFF on the
control panel. The power level indicator and all indicators
will ash. Refer to the illustration below.
2 To complete the activation, touch HI for highest heat,
LO for lowest heat, or touch the desired preset power
level indicator.
3 To change the heat setting while the unit is on, touch or
slide to the desired preset power level or touch + or –
to adjust the temperature in 1° increments.
4 To turn the unit off, touch ON/OFF.
PREHEAT
Preheat the steamer module until the water temperature
reaches the set temperature before adding food. Always
cook food in an insert pan, never place food directly into the
steamer basin.
8 | Wolf Customer Care 800.222.7820
POWER LEVEL
INDICATOR
Power level indicator
STEAMER MODULE OPERATION
Steamer Operation
TIMER
The timer can be set in one-minute increments up to 99
minutes. Once a time is set,
will illuminate on the control
panel and the countdown is visible on the timer display.
Refer to the illustration below. The timer is independent from
module operation.
Setting timer:
1 Touch TIMER.
2 Touch and hold + or – until the desired time is shown
on the timer display. Timer will begin the countdown in
minutes.
3 Timer will chime with one minute left and complete the
countdown in seconds.
4 When complete, timer will chime and continue to chime
until TIMER is touched.
HOT WATER INDICATOR
will illuminate on the control panel and will remain on
until the water temperature is below 140°F
(60°C). It may
remain illuminated even when the steamer module is off.
ALL OFF
When the heating element is activated, will illuminate on
the control panel. To turn the element off, touch ALL OFF.
Timer control
wolfappliance.com | 9
STEAMER MODULE OPERATION
Steamer Operation
WATER LEVEL
There are two water level indicators on the steamer basin.
The lower line represents 10 cups
(2.4 L) and is the recom-
mended level for the insert pans. The upper line represents
5 quarts
(4.7 L) of water. Refer to the illustration below. Do
not use the solid pan if the basin is lled to the upper line.
The pan will ll with water.
If the water level is too low, ‘Lo’ will appear on the control
panel display. Power to the heating element is automatically
disabled and the unit will enter lock mode.
Add water, then touch TIMER to resume operation.
WATER LEVEL
LINES
EXTENDED OPTIONS
The extended options feature allows the user to set preferences for volume, tone, control panel lock and Sabbath
feature.
Setting extended options:
1 While unit is off and unlocked, touch and hold ALL OFF
for ve seconds.
2 ‘VO’ will appear on the timer display.
Touch LO or HI to adjust volume.
3 Touch + on the timer control to adjust tone. ‘Fr’ will
appear on the timer display.
Touch LO or HI to adjust tone.
4 Touch + on the timer control to adjust the automatic
control panel lock. ‘Lo’ will appear on the timer display.
Touch LO or HI to turn the automatic lock feature off or
on.
5 Touch + on the timer control to adjust temperature offset.
‘OF’ will appear on the timer display. Degrees of offset
will appear on the temperature display.
Water level
Touch temperature + or - to adjust offset.
6 Touch + on the timer control to adjust temperature units.
‘Un’ will appear on the timer display. ‘F’ or ‘C’ will appear
on the temperature display.
Touch temperature + or - to adjust units.
7 Touch + on the timer control to enter Sabbath mode. ‘SA’
will appear on the timer display.
Touch LO to activate or deactivate the feature.
8 Touch ALL OFF to conrm settings.
10 | Wolf Customer Care 800.222.7820
STEAMER MODULE OPERATION
Steamer Operation
STEAMING | DEFROSTING
1 Fill the steamer basin with water to the minimum water
level line. Cover with the lid.
2 Touch ON/OFF on the control panel, then select the
desired power level. During preheat, the display alternates between the actual water temperature and set
temperature. An audible chime indicates set temperature
is reached.
3 Add food to the perforated pan, then place in the
steamer basin and cover with the lid.
4 Touch ON/OFF to turn the unit off.
PROOFING
1 Fill the steamer basin with water to the minimum water
level line. Cover with the lid.
2 Touch ON/OFF on the control panel, then select the
desired power level. During preheat, the display alternates between the actual water temperature and set
temperature. An audible chime indicates set temperature
is reached.
3 Place bowl with bread dough, uncovered, in the perfo-
rated pan, then place in the steamer basin and cover
with the lid.
SLOW-COOKING
1 Fill the steamer basin with water to the minimum water
level line. Cover with the lid.
2 Touch ON/OFF on the control panel, then select the
desired power level. During preheat, the display alternates between the actual water temperature and set
temperature. An audible chime indicates set temperature
is reached.
3 Add food to the solid pan and cover food completely
with liquid. Cover the pan with heavy plastic wrap, then
with foil. Place in the steamer basin and cover with the
lid.
4 Touch ON/OFF to turn the unit off.
SABBATH
The steamer will remain on until the water level drops,
causing the water level safety feature to automatically turn
the unit off without adjusting controls. Refer to water level,
page 10.
WARMING
1 Fill the steamer basin with water to the minimum water
level line. Cover with the lid.
4 Touch ON/OFF to turn the unit off.
2 Touch ON/OFF on the control panel, then set tempera-
ture to 160°F
(70°C). During preheat, the display alter-
nates between the actual water temperature and set
temperature. An audible chime indicates set temperature
is reached.
3 Add food to the solid pan, then place in the steamer
basin and cover with the lid.
4 Touch ON/OFF to turn the unit off.
wolfappliance.com | 11
STEAMER MODULE OPERATION
Drain
AUTOMATIC DRAIN
The automatic drain requires a drain connection. The drain
will operate only if the unit is off and the water temperature
is below 140°F
(60°C).
To activate automatic drain:
1 Touch DRAIN on the control panel for 3 seconds. An
audible chime will sound,
will illuminate and the
drain valve will open for 2 minutes. Repeat as needed to
completely drain the steamer basin. Refer to the illustration below.
2 Touch DRAIN to close valve.
MANUAL DRAIN
The manual drain requires a heat resistant receptacle with
a minimum 2 gallon
(7.6 L) capacity. The drain will operate
only if the unit is off and the water temperature is below
(60°C).
140°F
To activate manual drain:
1 Place receptacle under the unit.
2 Touch DRAIN on the control panel for 3 seconds. An
audible chime will sound,
will illuminate and the
drain valve will open for 2 minutes. Repeat as needed
to completely drain the steamer basin.
3 Touch DRAIN to close valve.
DRAIN
Drain control
12 | Wolf Customer Care 800.222.7820
CARE RECOMMENDATIONS
Care Recommendations
CLEANING
Stainless steel Use a nonabrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster,
lightly wipe surface with a water-dampened microber cloth followed by a dry polishing chamois. Always
follow the grain of stainless steel.
Control panel Use a spray degreaser to remove ngerprints and food soil. Spray on a cloth before wiping panel.
IMPORTANT NOTE: Do not spray cleaners directly on the control panel.
Glass lid The glass lid is dishwasher safe, or wash by hand with warm water and mild detergent. Rinse and dry
thoroughly.
Insert pans Solid and perforated insert pans are dishwasher safe, or wash by hand with warm water and mild
detergent. Rinse and dry.
Drain strainer The strainer should remain in the drain outlet during normal use and cleaning. Lift the strainer out and rinse
after each use to remove food particles.
Steamer basin Drain water from steamer basin. Refer to page 12. Pour warm water with mild detergent into the empty basin.
Scrub with a nylon brush. Rinse well, drain and dry thoroughly. For hard water calcium deposits, clean with
white vinegar and water or a cleaner designed to remove minerals. Let mixture stand in the steamer basin,
then scrub with a nylon brush. Rinse well. For soft water salt deposits, wipe out with a wet cloth. Rinse well.
wolfappliance.com | 13
TROUBLESHOOTING
Troubleshooting
OPERATION
Steamer module does not operate.
• Verify power is on.
• Verify electrical power to module and home circuit
breaker is on.
• Module is in lock mode. Touch and hold LOCK for three
seconds to unlock control panel.
• Module will automatically turn off after 12 hours of
continuous use when set at 180°F
(80°C) or higher.
‘LO’ appears on the control panel display.
• Water level is too low. Power to the heating element is
automatically turned off. Refer to water level, page 10.
Module temperature issue.
• Contact Wolf customer care at 800-222-7820 for
recommendations.
SERVICE
• Maintain the quality built into your product by contacting
Wolf Factory Certied Service. For the name of the
nearest Wolf Factory Certied Service, check the contact
& support section of our website, wolfappliance.com or
call Wolf customer care at 800-222-7820.
• When contacting service, you will need the model and
serial number of your product. Both numbers are listed
on the product rating plate. Refer to page 5 for rating
plate location.
• For warranty purposes, you will also need the date of
installation and name of your authorized Wolf dealer. This
information should be recorded on page 3 of this guide.
Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf &
Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries.
All other trademarks are property of their respective owners in the United States and other countries.
14 | Wolf Customer Care 800.222.7820
Loading...