Wolf 827371 Installation manual
CONTENTS
1 Assembly, doors/drawers
Note: Mounting hardware is not provided. Use mounting
screws manufactured specifically for the enclosure material
e.g. wood, metal, brick, or stone. The mounting holes
accommodate a #10 screw.
Note: The opening dimensions provided are for a standard
installation. For a flush installation, refer to the overall
dimensions in the Wolf design guide and adjust the
opening dimensions accordingly.
OUTDOOR STORAGE INSTALLATION
Verify the opening dimensions.
1
STORAGE DOORS AND DRAWERS
DESCRIPTION WIDTH HEIGHT DEPTH
Single Drawer 27 1/4" 9 3/4" 24 1/4"
Paper Towel Drawer 14 3/4" 8 1/4" 19 1/4"
2- or 3-Drawer 12 1/4" 19 1/4" 18 1/4"
Drawer | Door 28 3/4" 19 1/4" 18 1/4"
Tall Dry Storage 22 1/4" 32 1/4" 20"
Short Dry Storage 34 1/4" 19" 20"
Single Trash | Recycle 16 1/4" 24 1/4" 19 3/4"
Double Trash | Recycle 16 1/4" 24 1/4" 22 3/4"
Remove drawers and/or doors.
2
Outdoor Storage Installation
wolfappliance.com 800.222.7820
For drawers, rotate the left slide tab up and the right
3
slide tab down, then pull the drawer forward.
For doors, rotate the back of the hinge away from the
4
frame.
827889 REV-A 06/2017
Page 1 of 2
Place the assembly inside the opening.
5
Verify the assembly is level, then secure the assembly
6
to the opening.
Install the drawers and/or doors.
7
*827889$REVA*
Outdoor Storage Installation (continued)
For the combination door/drawer unit, rotate the door
8
hinge adjustment screws to align the door. Dry storage
doors are not adjustable.
Outdoor Storage Installation
wolfappliance.com 800.222.7820
Page 2 of 2
Loading...