Wolf 824857, 824855, 824854, 826046 Installation

Coffee System Trim Installation

wolfappliance.com 800.222.7820

M Series Transitional and Professional Contents

1 Trim

12 Screw

2 Bracket, side

1 Wipe, alcohol

E Series Transitional and Professional Contents

1 Trim

8 Screw

2 Bracket, side

1 Wipe, alcohol

Contemporary Contents

2 Trim

6 Screw

2 Bracket, side

1 Wipe, alcohol

INSTALLATION

1 To install side brackets, remove three existing screws

from each side of the coffee system. Verify the bracket

anges are facing the front of the unit, then reinstall the
screws to secure the brackets. The brackets are
universal and can be used on either side.

2 Thoroughly clean the front of the coffee system using

the alcohol wipe supplied and dry using a lint-free cloth.

3 Align the trim with the holes on each bracket and loosely

secure with the supplied screws. The number of screws

is dependent on the style of trim being installed. Verify
the tabs for the tape are accessible from the front.

4 Remove the backing material from the tape and apply

pressure to adhere the trim panel to the coffee system.

5 Secure the sides of the trim by tightening the screws in

the side brackets. Do not overtighten as this may cause

bowing or distortion of the trim.

FLANGE

Attach side brackets.

Attach Trim.

9002006 REV-B 01/2016

page 1 of 1