Wolf 822729, 822730, 812419 Installation

Front Panel Installation

Warming Drawer Front Panel Installation

wolfappliance.com 800.222.7820

INSTALL MOUNTING PANEL

Remove protective material from the front panel assembly.
Place the assembly on a protected work surface then
remove one screw from the bottom of the assembly. Refer
to the illustrations below. Separate the mounting panel from
the assembly then install the front mounting panel using six
8–32 x 3/8" hex head screws. Insert rubber bumpers, round
side facing the warming drawer, onto the mounting panel.

Bottom screw removal.

Mounting panel installation.

FRONT PANEL WITH STAINLESS HANDLE

1 Slide the top lip of the front panel over the front mounting

panel. Insert three 8–18 x 1/2" screws through the top rear
of the front panel. Refer to the illustration below.

2 Insert the remaining three screws into the bottom of the

front panel.

FRONT PANEL WITH BLACK HANDLE

1 Slide the side anges of the front panel over the front

mounting panel. Insert three 8–18 x 1/2" screws through
the top rear of the front panel. Refer to the illustration
below.

2 Insert the remaining three screws into the bottom rear of

the front panel.

TOP LIP

823486 REV-B 12/2013

Front panel with stainless
handle.

page 1 of 1

Front panel with black handle.