Wistron EM300 Users Manual
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
EM300 Module
Module/Data Card integration guide
Ver: 1.0
Taipei Design Center, Wistron Corp.
Engineering Specification
2008/12/01
1
EM300 Data Card Integration Guide
t
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Document Revision History
Rev. ECO # Date Brief Description of Change Originator Approved by
Draft Nov 25
2008
Check
Notice: Restricted Proprietary Information and subject to the confidentiality restrictions contained
in any applicable non-disclosure agreement.
Dec 1
2008
th
s
Initial release of Draft Version for
Customer Review and Feedback
Check and Review
Richard Hsieh
Brian Yang
The information contained in this document is the exclusive property of Wistron Coporation, Inc.
All rights reserved. Unauthorized reproduction of this manual in any form without the expressed
written approval of Wistron Wireless, Inc. is strictly prohibited. This manual may not, in whole or in
part, be copied, reproduced, translated, or reduced to any electronic or magnetic storage medium
without the written consent of a duly authorized officer of Wistron Wireless, Inc.
The information contained in this document is subject to change without notice and should not be
construed as a commitment by Wistron Wireless, Inc. unless such commitment is expressly given
in a covering document.
1
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Wistron Coporation, Inc. makes no warranties, either expressed or implied, regarding this
document, its merchantability, or its fitness, for any particular purpose.
Legal Disclaimer
This document and the information contained in the EM300 module& Design Guide
(together, the “Information”) is provided to you by Wistron Corporationfor informational
purposes only.
Wistron Corporationis providing the Information because Wistron Corporation believes the
Integration and Design Guidelines may be useful. The Information is provided on the condition
that you will
be responsible for making your own assessments of the information and are advised to verify all
representations, statements and information before using or relying upon any of the Information.
Although Wistron Corporationbelieves it has exercised reasonable care in providing the
Information, Wistron Corporationdoes not warrant the accuracy of the Information and is not
responsible for any damages arising from its use or reliance upon the Information. You further
understand and agree that Wistron Corporationin no way represents, and you in no way rely on
a belief, that Wistron
Corporationis providing the information in accordance with any standard or service (routine,
customary or otherwise) related to the consulting, services, hardware or software industries.
WISTRON CORPORATIONDOES NOT WARRANT THAT THE INFORMATION IS ERRORFREE. WISTRON CORPORATIONIS PROVIDING THE INFORMATION TO YOU "AS IS"
AND "WITH ALL FAULTS." WISTRON CORPORATIONDOES NOT WARRANT, BY VIRTUE
OF THIS DOCUMENT, OR BY ANY COURSE OF PERFORMANCE, COURSE OF DEALING,
USAGE OF TRADE OR
ANY COLLATERAL DOCUMENT HEREUNDER OR OTHERWISE, AND HEREBY EXPRESSLY
DISCLAIMS, ANY REPRESENTATION OR WARRANTY OF ANY KIND WITH RESPECT TO
THE INFORMATION, INCLUDING, WITHOUT LIMITATION, ANY REPRESENTATION OR
WARRANTY OF DESIGN, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-INFRINGEMENT, OR ANY REPRESENTATION OR
WARRANTY THAT THE INFORMATION IS APPLICABLE TO OR INTEROPERABLE WITH ANY
SYSTEM, DATA, HARDWARE OR SOFTWARE OF ANY KIND.
WISTRON CORPORATIONDISCLAIMS AND IN NO EVENT SHALL BE LIABLE FOR ANY
LOSSES OR DAMAGES OF ANY KIND, WHETHER DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR EXEMPLARY, INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
LOSS OF BUSINESS INFORMATION, LOSS OF GOODWILL, COVER, TORTIOUS CONDUCT
OR OTHER PECUNIARY LOSS, ARISING OUT OF OR IN ANY WAY RELATED TO THE
PROVISION, NON-PROVISION, USE OR NON-USE OF THE INFORMATION, EVEN IF YOU
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES.
2
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Table of Contents
Reference Documents...................................................................................................................5
EM300 module.................................................................................................................5
3GPP References ........................................................................................................... 5
Safety Warning ................................................................................................................ 7
Federal Communications Commission Notice (FCC—United States) ............................. 8
Radio Frequency Exposure Evaluation Requirements ................................................. …8
Compliance & Certification Requirements ..................................................................... 11
Getting Started............................................................................................................................. 12
Feature List ………………………………………………………………………………........13
General.......................................................................................................................... 18
Setting Up...................................................................................................................... 20
3
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user manual of the end product.
The user manual which is provided by OEM integrators for end user must include the following the
Information in a prominent location.
"TO comply with FCC RF exposure compliance requirements, the antenna use for this transmitter must be
in
ll
r
vi
operating in conjunction with any other antenna transmitter.
Frequency range, the warning statement in the user manual of the end product should include the
r
riin
Lable for end product must include ‘‘Contains FCC ID:PU5-EM300’’or ‘‘A RF transmitter inside’ FCC
f
r
-
’’
rin
in hi vi
i
in in
n f
r
l
2
l vi h
m fr
m
ll
r
n n
r
hri
m
n
r h
-l
imn
r
.’’
4
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Reference Documents
Phone module
EM300 module Electromehcanical Specification Revision 1.0June 25, 2008
EM300 HW specification Version 1.1 June 25, 2008
3GPP References
The following documents contain provisions which, through reference in this text, constitute provisions of the
present document.
References are either specific (identified by date of publication, edition number, version number, etc.)
or non-specific.
For a specific reference, subsequent revisions do not apply.
For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document
(including a GSM document), a non-specific reference implicitly refers to the latest version of that
document in the same Release as the present document.
[1] Void.
[2] 3GPP TS 23.038: "Alphabets and language-specific information".
[3] 3GPP TS 23.040: "Technical realization of the Short Message Service (SMS) ".
[4] 3GPP TS 23.041: "Technical realization of the Cell Broadcast Service (CBS)".
[5] 3GPP TS 24.008: "Mobile Radio Interface Layer 3 specification; Core Network
Protocols; Stage 3".
[6] 3GPP TS 24.011: "Short Message Service (SMS) support on mobile radio interface".
[7] 3GPP TS 24.012: "Cell Broadcast Service (CBS) support on the mobile radio interface".
[8] 3GPP TS 27.001: "General on Terminal Adaptation Functions (TAF) for Mobile
Stations (MS)".
[9] 3GPP TS 27.007: "AT command set for User Equipment (UE)".
[10] 3GPP TS 51.011: "Specification of the Subscriber Identity Module - Mobile
Equipment (SIM - ME) interface".
[11] ITU-T Recommendation V.25ter: "Serial asynchronous automatic dialing and control".
[12] ITU-T Recommendation V.24: "List of definitions for interchange circuits between data terminal
equipment (DTE) and data circuit-terminating equipment (DCE)".
[13] ITU-T Recommendation E.164: "The international public telecommunication numbering
plan".
5
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
[14] ITU-T Recommendation E.163: "Numbering plan for the international telephone
service".
[15] 3GPP TR 21.905: "Vocabulary for 3GPP Specifications".
[16] 3GPP TS 31.102: "Characteristics of the USIM application.
6
EM300 Data Card Integration Guide
R&D Division, Handheld & Mobile Communication,
Taipei Design Center, Wistron Corp.
Engineering Specification
Notices
Safety Warning
Neither the nor EM300 MODULE / Data Card products may be used in an environment where radio
frequency equipment is prohibited or restricted in its use. This includes aircraft/airports, hospitals, and
other sensitive electronic areas.
Do not operate RF devices in an environment that may be susceptible to radio interference
resulting in danger, specifically:
x Areas where prohibited by the law
Follow any special rules and regulations and obey all signs and notices. Always
turn off the host device when instructed to do so, or when you suspect that it may cause
interference or danger.
x Where explosive atmospheres may be present
Do not operate your modem in any area where a potentially explosive
atmosphere may exist. Sparks in such areas could cause an explosion or fire resulting
in bodily injury or even death. Be aware and comply with all signs and instructions.
x Users are advised not to operate the modem while at a refueling point or service station.
Users are reminded to observe restrictions on the use of radio equipment in fuel depots
(fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
x Areas with a potentially explosive atmosphere are often but not always clearly marked.
Potential locations can include gas stations, below deck on boats, chemical
transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be advised to turn off your
vehicle engine.
x Near Medical and life support equipment
Do not operate your modem in any area where medical equipment, or life support
equipment may be located, or near any equipment that may be susceptible to
any form of radio interference. In such areas, the host communications device
must be turned off. The modem may transmit signals that could interfere with this
equipment.
x On an aircraft, either on the ground or airborne
In addition to FAA requirements, many airline regulations state that you must
suspend Corporationoperations before boarding an airplane. Please ensure that the host
device is turned off and your modem is removed from the card slot prior to boarding
aircraft in order to comply with these regulations. The modem can transmit signals that
could interfere with various onboard systems and controls.
x While operating a vehicle
The driver or operator of any vehicle should not operate a Corporationdata device.
Doing so will detract from the driver or operator's control and operation of that
7
Loading...