SAVE THIS USE AND CARE BOOK
6" OR 7" 2-SPEED CLIP-ON FAN
IMPORTANT SAFEGUARDS
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or similarly qualified person in
order to avoid a hazard.
When using electrical appliances, basic safety precautions should
always be followed, including the following:
■ READ AND SAVE THESE INSTRUCTIONS.
■ Use fan only for intended use, as described in instruction manual.
■ To protect against electrical shock, do not immerse unit, plug,
or cord in water or spray with liquids.
■ Close supervision is necessary when any appliance is used by
or near children.
■ Unplug from outlet when not in use, when moving fan from one
location to another, before putting on or taking off parts and
before cleaning.
■ Never insert fingers, pencils or any other objects through the grille
when fan is running.
■ Disconnect fan before cleaning.
■ Make sure fan is clipped on a stable surface.
■ Do not use fan in a window. Rain may cause an electrical hazard.
■ Do not operate in the presence of explosive and/or flammable
fumes.
■ Do not place fan or any parts near an open flame, cooking or other
heating appliances.
■ Do not operate any appliance with a damaged cord or plug, after
the appliance malfunctions or has been dropped or damaged
in any manner.
■ Do not let cord hang over edge of table or counter or touch hot
surfaces.
■ To disconnect, grip plug and pull from wall outlet. Never yank
on cord.
■ Always use on a dry surface.
■ This product is intended for household use only and not for
commercial or industrial use.
■ Do not use fan near curtains, plants, window treatments, etc.
WARNING: To reduce the risk of fire or electrical shock, do not use
this fan with any solid-state speed control device.
SAVE THESE INSTRUCTIONS
Printed in Hong Kong
2000/10-12-55E CF-6
NR-6CFG
NR-6CFP
PUB No. 177176-00
CARE AND CLEANING
This appliance requires little maintenance and contains no user serviceable
parts. Do not try to fix it yourself. Refer it to qualified service personnel if
servicing is needed.
Your fan is permanently lubricated and will not require additional
lubrication for the life of the fan.
TO CLEAN: Before cleaning, turn fan off and unplug from electrical outlet.
Wipe off excess dust with a lint-free cloth. To ensure adequate air
circulation to the motor, keep vents located at the rear of the motor housing
free from dust accumulation. A vacuum cleaner hose can be used to clean
these vents. Do not submerge your fan in water or any other liquid. Do not
allow any liquid to get into the fan or motor.
TO STORE: Make sure to clean the fan before storing. Retain the original
packaging for the purpose of storing your fan. Always store fan in a dry
place. Never store it while it is still plugged in. Never wrap the cord tightly
around the fan, and do not put any stress on the cord where it enters the fan,
as it could cause the cord to fray and break.
Once the fan is clipped in position, you can manually
rotate the fan a complete 360° or tilt it left to right to
find the desired cooling angle, without moving the clip!
No space above the shelf? Clip the fan upside down,
and adjust to desired cooling angle.
Slightly loosen the vertical angle adjustment knob.
Move the fan back and forth to find the perfect cooling
position for those often stuffy, overheated rooms!
Coiled Cord
Fan
Blade
Safety
Grille
Motor Housing
Fan Neck
ASSEMBLY DIAGRAM
Vertical Angle
Adjustment Knob
Round
Opening
Fan
Bracket
6-sided
Opening
Locking
Nut
Loading...