WIKA L990.TB Specifications
Diaphragm-T ype Diaphragm Seals
Diaphragm Seals
Application
Process industry diaphragm seal to combine with Bourdon tube
pressure gauges. Intended for corrosive, contaminated, hot or
viscous pressure media.
Design
Upper and lower housing welded with integral diaphragm
It requires hydraulic fluid to transmit pressure to instrument
Process Connection
¼” or ½” NPT-female, other see options
Instrument Connection
¼” or ½” NPT-female
Suitable Pressure Ranges (MWP 2500PSI @250°F)
2 ½” gauge: 15 PSI to 2500 PSI
4 or 4 ½” gauge: 15 PSI to 2500 PSI
Available Options
See Selection Guide (over)
Mini Diaphragm Seal
Type L990.TB
To determine the effects of temperature and response time in a
specific application, contact the factory for an Application
Questionnaire. The information provided will allow WIKA Technical
Support to accurately model your application parameters using stateof-the-art computer simulation techniques.
ACS L990.TB
(ACS 99.01.M)
Selection Guide – 990.TB
Notes
1. Suitable pressure ranges 0-15
PSI to 0-2500 PSI.
2. Upper housing, lower housing
and diaphragm must all be Monel
3. Available from stock with
stainless steel lower housing only.
®
.
990.TB,1/4X1/4F,SS,SS-0,SS
Flushing Connection
0 = None
1 = 1/8” NPT female
2 = 1/4” NPT female (see note 3)
Lower Housing Material
SS = 316 stainless steel
MO = Monel
HB = Hastelloy® B-2
HC = Hastelloy
CA = Carpenter
Upper Housing Material
SS = 316 stainless steel
MO = Monel
HC = Hastelloy® C-276
CA = Carpenter® 20 (See note 2)
Process Connection
1/4F = 1/4” NPT female
1/2F = 1/2” NPT female
3/4F = 3/4” NPT female
1.0F = 1” NPT female
1/4M = 1/4” NPT male
1/2M = 1/2” NPT male
3/4M = 3/4” NPT male
1.0M = 1” NPT male
Diaphragm Material
SS = 316 stainless steel
MO = Monel® 400 (See note 2)
HC = Hastelloy® C-276
HB = Hastelloy
CA = Carpenter® 20 (See note 2)
®
400 (See note 2)
®
B-2
®
400 (See note 2)
®
C-276
®
20 (See note 2)
Instrument Connection
Items in
stock (subject to prior sales).
For optional items, consult
factory for current lead-time.
are available from
bold
1/4 = 1/4” NPT female
1/2 = 1/2” NPT female
CPL= Capillary connection (to weld capillary directly to seal)
Diaphragm Seal Design
990.TB = Large Diaphragm Design, dM=2.1" (See note 1) MWP = 2500 PSI
Options not listed may be available, please consult factory.
Fill Fluid & Mounting options: Please reference data sheet ACS 99.MO.
THE MEASURE OF
Total Performance
TM
Ordering Information:
State computer part number (if available) / type number / size /
range / connection size and location / options required.
Specifications given in this price list represent the state of engineering at the time of printing.
Modifications may take place and the specified materials may change without prior notice
03/07
WIKA Instrument Corporation
1000 Wiegand Boulevard
Lawrenceville, Georgia 30043-5868
Tel: 770-513-8200 Fax: 770-338-5118
http://www.wika.com e-mail:diaphragmseal@wika.com
Loading...