Whistler WIC-5000 Owner's Manual

1

WIC-5000 Inspection Camera

Owner’s Manual

The Whistler Group Headquarters
3604 NW Frontage Rd.
Bentonville, AR 72712

www.whistlergroup.com

WIC-5000man.qxp 11/27/2012 2:48 PM Page 1

2

Welcome

Congratulations on your purchase of our inspection video camera with color LCD
monitor with video out capabilities. Please read the user manual carefully before
using this product. This product is designed as a remote inspection device,
appropriate for use in surveying pipes or other hard-to-reach places, equipment
or furnishing installation, car repair, etc.

9mm Waterproof
Camera Assembly

2.4” LCD

Color Monitor

Magnet Accessory

Clip

Mirror Accessory

Clip

Hook Accessory

Clip

Packing List

Flexible Tube

9mm Camera

Battery Compartment

Handle

LED Brightness Control

Power ON Indicator

Low Battery Indicator

Power ON/OFF Control

Image Rotate Control

Contrast Control

Feature Callouts

Video Out Port

WIC-5000man.qxp 11/27/2012 2:48 PM Page 2

Installation

Install Batteries

1. Remove the cover.

2. Insert four (4) new AA batteries into the appropriate slots. Proper battery
orientation is indicated on the battery compartment.

3. Replace battery cover.

Install the Camera with Flexible Tube

When connecting the camera tube to the
handheld unit, make sure that the keyed
ends are properly aligned. Once they are
lined up, finger tighten the knob to hold
the connector in place.

Keyed end plugs
into socket

Finger tighten
the knurled knob

Install the Accessories

The three (3) included accessories (mirror, hook and magnet) are all attached to
the tube in the same way as illustrated below:

Place hook into hole at end of tube.
Place rubber ring around camera head
and hook.

3

1

2

WIC-5000man.qxp 11/27/2012 2:48 PM Page 3