Whistler PRO-3600 User Manual
Installation
Instructions
Pro-3600
Laser/Radar Detector
THE WHISTLER GROUP, INC.
CORPORATE HEADQUARTERS
3604 NW Frontage Rd.
Bentonville, AR 72712
TEL 479.273.6012 FX 479.273.2927
P/N 202903 © The Whistler Group, Inc 2010
www.whistlergroup.com
www.whistlergroup.com
TOOLS REQUIRED
TABLE OF CONTENTS
Tools Required For Installation
• Phillips Screwdriver
• 3/8" Open End Wrench
• Electric Drill
• Drill Bit: 1/4’, 13/64",15/32” and #32 Bit
• Other Tools May Be Required Based On Your Vehicle Type Or
Requirements For Customized Installation
Dimensions:
• Control Panel: .95” H x 3.22” W x .58” L
• Laser/Radar Antenna: 1.74” H x 3.54” W x .90” L
• Interface Box: 2.36” H x 4.40” W x .90” L
• Voice Module: 2.19” W x 1.21” L
Cable Lengths:
• Laser/Radar Antenna Cable: 3’
• Voice Module Cable: 6’
• Control Panel Cable: 6’
• Alert/Security LED Cable: 6’
• Power Cable: 6’
• Interconnecting Cable: 20’
Topic Page
Tools Required 1
Components 3 - 4
Mounting Brackets 5
Mounting Fasteners 6
Installation of Laser/Radar Antenna 7 - 11
Installation of Temperature Probe 11
Installation of Interface Box (iBox) 12 - 13
Installation of Alert LED 13
Installation of Optional Laser Antenna 14 - 15
Installation of Control Panel 16
Installation of Voice Module 17
Installation of Optional Rear
Laser/Radar Antenna 17
Installation of Optional GPS Module 18
Power Connections 19
Specifications are subject to change without notice.
1
Error Codes 20
Troubleshooting Guide 21
Optional Accessories 22
Installation of Through Dash Bracket 23 - 24
2
Pro-3600 COMPONENTS
Interface Cable
Pro-3600 COMPONENTS
INTRODUCTION
3
4
MOUNTING FASTENERS
6
MOUNTING BRACKETS
5
Loading...