Whistler PRO3450 INSTALLATION
Installation
Instructions
Pro-3450
Laser/Radar Detectors
THE WHISTLER GROUP, INC.
CORPORATE HEADQUARTERS
13016 N. Walton Blvd.
Bentonville, AR 72712
TEL (479) 273-6012 FX (479) 273-2927
www.whistlergroup.com
P/N 202882, © WHISTLER 2004
www.whistlergroup.com
Pro3450INSTALLmanual.pdf 3/15/04 3:18 PM Page 1
TABLE OF CONTENTS
2
Topic Page
Tools Required 1
Whistler Pro-3450 Components 3
Mounting Brackets 4
Mounting Fasteners 5 - 6
Installation of Radar Antenna 7 - 11
Installation of Temperature Probe 11
Installation of Laser Antenna 12 - 13
Installation of Control Panel 14 - 16
Optional Accessories 17
Troubleshooting Guide 18
TOOLS REQUIRES
Tools Required For Installation
• Phillips or Blade Screwdriver
• 3/8" Open End Wrench
• Electric Drill
• Drill Bit: 13/64", 5/16”. 7/64”, 9/64”, and 13/64”
• Other Tools May Be Required Based On Your Vehicle Type Or
Requirements For Customized Installation
Dimensions:
• Control Panel: .8” H x 2.8” W x 2.3” L
• Radar Antenna: 1.4” H x 4.0” W x 3.6” L
• Laser Antenna: 1.9” H x .9” W x .7” L
Cable Lengths:
• Radar Antenna Cable: 3”
• Laser Antenna Cable: 9’
• Power Cable: 4’
• Interconnecting Cable: 20’
Specifications are subject to change without notice.
1
Pro3450INSTALLmanual.pdf 3/15/04 3:18 PM Page 3
INTRODUCTION
MOUNTING BRACKETS
4
WHISTLER Pro-3450 COMPONENTS
3
Pro3450INSTALLmanual.pdf 3/15/04 3:18 PM Page 5
Loading...