This product earned the ENERGY STAR by meeting strict energy
efficiency guidelines set by the U.S. EPA. U.S. EPA does not
endorse any manufacturer claims of healthier indoor air from the
use of this product.
The energy efficiency of this ENERGY STAR qualified model is
measured based on a ratio between the model’s CADR for dust
and the electrical energy it consumes, or CADR/Watt.
Este producto obtuvo la designación de ENERGY STAR al haber
cumplido con los estrictos lineamientos de eficiencia de energía
establecidos por la Agencia de Protección del Medioambiente de
los Estados Unidos. La Agencia de Protección del
Medioambiente de los Estados Unidos no respalda ninguna
afirmación por parte del fabricante en el sentido de que el uso de
este producto proporciona aire interior más sano.
La eficiencia de energía de este modelo que reúne las
condiciones de ENERGY STAR se mide en relación con la
relación entre el CADR (Índice de emisión de aire limpio) para
polvo del modelo y la energía eléctrica que consume, es decir
CADR/Watt.
TABLE DES MATIÈRES
SÉCURITÉ DU PURIFICATEUR D’AIR .......................................14
Ce produit a reçu la certification ENERGY STAR en satisfaisant
aux directives strictes de rendement énergétique établies par
l'EPA aux É.-U. L'EPA aux É.-U. ne garantit pas l'engagement du
fabricant relatif à un air plus sain du fait de l'utilisation de ce
produit.
Le rendement énergétique de ce modèle certifié ENERGY STAR
est mesuré sur la base d'un ratio entre le débit d'air purifié
(poussière) du modèle et l'électricité consommée, ou le ratio
débit d'air purifié/Watt.
AIR PURIFIER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
can be killed or seriously injured if you don't
You
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Control Device.
WARNING:
Unplug air purifier before servicing.
To Reduce The Risk Of Fire or Electrical Shock, Do Not Use The Air Purifier With Any Solid-State Speed
To Reduce The Risk Of Fire Or Electrical Shock And Injury To Persons, Do Not Use In A Window.
READ AND SAVE THESE INSTRUCTIONS
3
INSTALLATION REQUIREMENTS
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Electrical Connection
To properly install your air purifier, you must determine the type of
electrical connection you will be using and follow the instructions
provided for it here.
■ The air purifier should be connected to a 115 V, 60 Hz, 15- or
20-amp fused 3 prong grounded outlet.
■ The use of a time-delay fuse or time-delay circuit breaker is
recommended.
Location Requirements
A
A. 6" (15.2 cm) min. clearance
■ You will need a level surface at least 6" (15.2 cm) from heat
sources such as ranges or heaters.
■ Do not block air openings or place the air purifier on a soft
surface such as a bed or sofa.
■ Operate indoors only.
AIR PURIFIER USE
NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should
be replaced annually, and the pre-filter should be replaced every 3 months. To remove and replace either filter, see “Filter Replacement”
in the “Air Purifier Care” section.
4
Using the Controls
AIR PURIFIER CARE
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
1. Plug into a grounded 3 prong outlet.
2. Press POWER to start the air purifier. An indicator light will
turn on.
3. Press POWER to stop the air purifier. The indicator light will
turn off.
Fan Speed
Press FAN SPEED until the indicator light comes on for the
desired speed.
FAN SPEEDRESULT
Low
Medium
High
Turb o
Sleep Mode
Press SLEEP MODE to set. Sleep mode runs on Low fan speed
for 8 hours and then returns to previously selected setting. To exit
before 8 hours, press SLEEP MODE, FAN SPEED, or POWER.
Control Lock
The Control Lock locks the controls to prevent unintended
changing of the settings when the air purifier is on or off.
1. Press and hold SLEEP MODE for 5 seconds to lock. The
Control Lock indicator light will turn on. (No selection can be
made.)
2. Press SLEEP MODE for 5 seconds to unlock. The Control
Lock indicator light will turn off. Now selections can be made
and the unit can be turned on or off.
Filter Status Lights
The pre-filter and HEPA filter status lights will help you know
when to change your filters. The green status lights will move
from New to Replace at preset intervals. When the red Replace
status light is flashing, replace the filter as indicated. See “Filter
Replacement” in the “Air Purifier Care” section.
Best product sound
Slower cleaning power
Moderate cleaning power
Maximum cleaning power
Cleaning
A
CDE
A. Release tabs
B. Controls
C. Front grille
1. Press POWER to turn off the air purifier.
2. Unplug air purifier or disconnect power.
3. Place fingers on the front release tabs. Gently push the tabs
in and pull the front grille forward to remove it.
4. Remove both filters and set aside. Do not try to wash and
reuse either the HEPA filter or the pre-filter.
5. Clean the air purifier with a soft, damp cloth.
6. Gently wash the front grille in soapy water.
NOTE: The grille is not dishwasher safe.
7. Reassemble the filters as shown in previous illustration.
8. Place the bottom tabs on the front grille into the bottom slots
in base of the air purifier. Push the top of the grille forward
until the grille locks into place.
9. Plug in air purifier or reconnect power.
10. Press POWER to start the air purifier.
D. Pre-filter
E. HEPA filter
F. Bottom slot
G. Mainframe assembly
AB
F
G
Filter Replacement
NOTE: The filter indicator lights on top of the air purifier will glow
when it is time to replace either the pre-filter or the HEPA filter.
For the most efficient operation of the air purifier, under normal
conditions it is recommended that you replace the pre-filter every
3 months and the HEPA filter every year. See “Replacement
Filters” in the “Assistance or Service” section.
1. Press POWER to turn off the air purifier.
2. Unplug air purifier or disconnect power.
3. Place fingers on the front release tabs. Gently push the tabs
in and pull the front grille forward to remove it.
4. Remove and replace the indicated filter. Install the new HEPA
filter in the same direction shown by the arrow located on the
filter frame. Install the new pre-filter by placing it on the tabs.
NOTE: Do not try to wash and reuse either the HEPA filter or
the pre-filter.
5. Place the bottom tabs on the front grille into slots in the base
of the air purifier. Push the top of the grille forward until the
grille locks into place.
5
6. Plug in air purifier or reconnect power.
7. Press POWER to start the air purifier.
8. Press either the PRE-FILTER RESET or the HEPA RESET
button for 5 seconds to turn off the filter indicator light(s) and
reset timer.
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid the
cost of a service call...
Air purifier will not run.
■ Check the following:
Is the air purifier turned on?
Is the power cord plugged into a grounded 3 prong outlet?
Has a fuse blown, or has a circuit breaker tripped?
Was a regular fuse used? Use a time-delay fuse or time-delay
circuit breaker.
To locate the Whirlpool designated service company in your
area, you can also look in your telephone directory Yellow
Pages.
For further assistance
If you need further assistance, you can write to Whirlpool
Corporation with any questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
For product related questions, please call the Whirlpool Canada
Inc. Customer Interaction Center toll free:
■ Features and specifications on our full line of appliances.
■ Referrals to local dealers.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
In the U.S.A.
Call the Whirlpool Customer eXperience Center
toll free: 1-800-253-1301.
Our consultants provide assistance with:
■ Features and specifications on our full line of appliances.
■ Referrals to local dealers, repair parts distributors, and
service companies. Whirlpool designated service technicians
are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States.
For parts, accessories and service in Canada
Call 1-800-807-6777. Whirlpool Canada Inc. designated service
technicians are trained to fulfill the product warranty and provide
after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada
Inc. with any questions or concerns at:
Customer Interaction Center
Whirlpool Canada Inc.
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
Replacement Filters
Replacement filters may be ordered by calling our Customer
eXperience Center at 1-800-253-1301.
In Canada, please call 1-800-807-6777.
You may also visit our website www.whirlpool.com or
www.whirlpoolappliances.ca.
NOTE: This information is also located on the HEPA filter for your
convenience.
Air Purifier
Model No.
HEPA Filter
Replacement
Part No.
Pre-Filter
Replacement
Part No.
AP510301183054 or 11870221183063
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.