Whirlpool WFW80HEBW2, WFW80HEBW1, WFW80HEBW0, WFW80HEBC2, WFW80HEBC1 Owner’s Manual

...

Whi ®

Use & Care Guide Guide d'utilisation et d_entretien

FRONT-LOADINGAUTOMATICWASHER LAVEUSEAUTOIVlATIQUEA CHARGEMENTFRONTAL

Para obtener acceso al

Manual de uso y

cuidado en espa_ol, o para

obtener informaci6n adicional acerca de su producto, visite:

www.whirlpool.com

W10441073B W10441074B - SP

If you have any problems or questions, visit us at www.whirlpool.com

Designed to use only HE High Efficiency detergents.

Con£ue pour I'utilisation d'un d6tergent haute

efficacit_ seulement.

TABLE OF CONTENTS

WASHER SAFETY...................................................................2

ACCESSORIES........................................................................3

CONTROL PANELAND FEATURES......................................4

USING THE DISPENSER DRAWER.......................................6

CYCLE GUIDE .........................................................................7

USING YOUR WASHER..........................................................8

WASHER MAINTENANCE ....................................................12

TROUBLESHOOTING ...........................................................15

WARRANTY...........................................................................22

ASSISTANCE OR SERVICE..................................Back Cover

TABLE DE MATIERES

Sg:CURITg:DE LA LAVEUSE................................................23

ACCESSOIRES......................................................................24

TABLEAU DE COMMANDE ETCARACTg:RISTIQUES.......25

UTILISATION DUTIROIR DU DISTRIBUTEUR ...................28

GUIDE DES PROGRAMMES ................................................29

UTILISATION DE LA LAVEUSE............................................31

ENTRETIEN DE LA LAVEUSE..............................................35

Dg:PANNAGE.........................................................................38

GARANTIE .............................................................................47

ASSISTANCE OU SERVICE...................... Couverture artiste

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey aft safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be kiUed or seriously injured if you don't immediately follow instructions.

You can be kiUed or seriously injured if you don't follow instructions.

Aft safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

SAVE THESE iNSTRUCTiONS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach intothe washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended inthis manual or in

published user-repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructionsfor grounding instructions.

ACCESSORIES

Customize your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, call 1-800-442-9991, or visit us at: www.whirlpool.com/accessories. In Canada, call 1-800-807-6777 or visit us at www.whirlpool.ca.

15" Pedestal Color-matched pedestals raise the

washer and dryer to a more comfortable working height. The large drawer

provides convenient storage.

Worksurface The worksurface bridges the

washer and dryer, and provides a convenient working and storage area.

Stack Kit

If space is at a premium, the stack kit allows the dryer to be installed on top of

the washer.

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models. NOTE: The control panel features a sensitive surface that

responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch

its name.

Model WFW80HE

NORMAL

QUICK WASH --

DRAIN & SPIN

CLEAN WASHER with aJ'_r_

Model WFW70HE / WFW60HE

NORMAL

COLD WASH

_'_ DELICATES

QUICK WASH

WHITES

HEAV_r"

DUTY

ECO

with Oxi

----- HEAVY DUTY

DRAIN &SPIN

)

fEstimatedT_meRemainin sx> DoorLocked _s AddGarment #_ TumbleFresh #z_ Done

t:L+I

_z_ Delay Wash

Eco Mon tot

\ Good Best

@¢_ Sensing

.... I .....I .... J ....

Extra Rinse Tumb_eFresh Cycle Signal Contrd Lock

Hold 3 se(:o_d Io_d 3 econd

fol Btton Sounds

Door Locked _ Add Garment _ Done

Warm Mediu T/

Delay Wash |

Cod Slow Cold ! Off

CLEAN WASI4ER with _fBS_

Control Lock

Hold 3 [ o_d

POWER

Touch to turn the washer on and off. Touch to stop/cancel

a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load.

See "Cycle Guide" for detailed descriptions of cycles. START

Touch and hold until the light above START comes on to start

a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch START when the

"Add Garment" LED is on. DELAY WASH

Use + and - to delay the start of the wash cycle by up to 12 hours. To turn off Delay Wash, use + and - to set the delay

time to "0," or touch POWER.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and the Estimated Time Remaining will be displayed (for times

longer than 60 minutes, hours will be displayed, followed by minutes). Factors such as load size, wash temperature,

and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads,

or excessive suds may cause the washer to adjust the cycle time, as well.

Touch the desired option along the bottom of the display to

adjust settings. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles.

Cycle Status Lights For details, see "Cycle Status Lights".

Wash Temp The recommended wash temperature is preset for each

cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best

results, follow the garment label instructions. All wash temperatures feature a cold rinse.

Spin

This washer automatically selects the spin speed based on

the cycle selected. Some preset speeds can be changed.

• Faster spin speeds mean shorter dry times, but may increase wrinkling in your load. Slower spin speeds reduce wrinkling, but will leave

your load more damp.

Soil

The Soil setting (wash time) is preset for each wash

cycle. For most loads, use this preset soil level. When

you change the soil setting, the cycle time will increase

or decrease in the Estimated Time Remaining display. For heavily soiled and sturdy fabrics, use the Soil setting

to select more wash time. For lightly soiled and delicate fabrics, use the Soil setting to select less wash time. Lower

soil level settings will help reduce tangling and wrinkling.

OPTIONS

Touch to activate additional wash options or additional

features on the washer. Not all options are available on all models.

_ Extra Rinse

Activate this option to add an extra rinse to most cycles. NOTE: Some cycles include this feature as a default.

See "Cycle Guide" for details.

TumbleFresh TM Option

The TumbleFresh TM option will periodically tumble

the load after the end of the cycle for up to 6 hours to reduce humidity. To turn on the TumbleFresh _ option,

touch TumbleFresh. If, however, the TumbleFresh " option isturned on, it will stay on for all future cycles until turned

back off - the washer remembers the last on/off status set. To turn off the TumbleFresh TM option, touch

TumbleFresh.

You may also activate the TumbleFresh TM option without running a cycle by touching and holding POWER for one

second, then touching and holding TumbleFresh for 3 seconds, then touching and holding START for 3 seconds.

To turn off the TumbleFresh _'_option when it is running,

touch POWER. NOTE: The door will lock while the TumbleFresh TM option

is active. To cancel the option and unlock the door, touch POWER.

Cycle Signal Use this option to turn on or off the signal that sounds

at end of cycle.

To turn off the tones that sound when a setting is

touched: Touch and hold CYCLE SIGNAL for about 3 seconds. Repeat to turn them on.

_ Control Lock

Touch and hold for 3 seconds to lock the controls

to avoid unwanted changes or operation. Touch and hold 3 seconds again to unlock. You can still touch START to

pause the cycle, or touch POWER to turn the washer off.

J f

j_ _HEdetergent

_ Liquid fabric

softener

_ Chlorine bleach

DISPENSER DRAWER

The dispenser drawer gives you the convenience of automatically adding HEdetergent, liquid chlorine bleach,

and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using

the dispenser drawer.

_High Efficiency "HE" detergent compartment

This compartment holds liquid or powdered HE detergent

for your main wash cycle.

_ Liquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric softener

at the optimum time in the cycle.

[] Use only liquid fabric softener inthis dispenser.

_ Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach

at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

CONTROL PANEL AND FEATURES

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency." Low-water washing creates excessive sudsing with a non-HE detergent. Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failure and, over time, buildup of mold or mildew. HE detergents are low-sudsing and quick-dispersing to produce the right amount of suds for the best performance. They hold soil in suspension so it is not re-deposited onto clean clothes. Follow the manufacturer's instructions to determine the amount of detergent to use.

Use only High Efficiency (HE)detergent.

Cycle Status Lights

Done

Once the cycle is complete, this light will come on. Remove the load promptly for best results. The Done indicator is also

lit during the TumbleFresh _"option.

Eco Monitor

The Eco Monitor allows you to see how the settings you select affect your energy savings. To use the Eco Monitor, choose

the best cycle, temperature, spin speed, soil level, and options for the fabrics being washed. The Eco Monitor will rate the

water and energy use of those selections, from Good to Best. You can then adjust the settings and options to decrease the

amount of energy used within that cycle.

USING THE DISPENSER DRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the "Using Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is completely closed.

NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal.

g HE detergent to dispenser

ModelWFW80HE shown

Delay Wash

If a Delay Wash is set, the Delay Wash indicator will light and the delay time will count down in the display.

Door Locked

Door Locked will light to indicate that the door is locked and cannot be opened without first pausing or canceling the cycle.

Sensing (on some models)

When START is touched, the washer will first perform a self-test on the door lock mechanism and the sensing light will come on. You will hear a click, the drum will make a partial turn, and the door will unlock briefly before locking again.

Once the door has locked the second time, the washer will drain to calibrate the sensors; then it will begin tumbling and

adding water. The sensing process will continue throughout the cycle. You may also hear water flowing through the dispenser, adding detergent to the load.

After the load size is sensed, the estimated time based on load size will be displayed. The actual cycle time may be

lengthened; however, the display will continue to show the estimated time.

The sensing light will blink once a second at various times during the cycle, such as when the washer is reducing extra

suds.

Add Garment

When "Add Garment" is lit, you may pause the washer, open the door, and add items.

TumbleFresh TM option

TheTumbleFresh TM indicator will light when the TumbleFresh TM option is active. During this time, the washer will occasionally

tumble the load.

HEdetergent

compartment

Pour a measured amount of HE detergent into detergent compartment.

For powdered detergent, lift the selector

to the high position. For liquid detergent,

push down the selector to the low position.

Do not overfill; adding too much detergent may cause detergent to be dispensed into the washer too early.

Powdered detergent: Lift the selector to the high position.

IMPORTANT:

[] Do not add single-dose laundry packet to dispenser

drawer.

[] Use powdered detergent when using the Delay Wash

option. Liquid detergent may seep out before the wash begins.

Liquid detergent: Push down the selector to

the low position.

Use only High Efficiency

(HE) detergent.

CYCLE GUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES: [] Not all cycles, temperatures, options, or spin speeds are available on all models. [] All wash temperature selections feature a cold rinse.

qtemstowash Cycle

using defauR Wash Spin Soil Available Cycle Details:

cycle settings: Temperature: Speed: Level: Options:

Normally soiled cottons Normal Fast Heavy TumbleFresh TM _ This cycle combines medium-speed linens, sheets, and Medium Normal Extra Rinse _ tumbling and a fast-speed spin.

mixed garment loads Off

Heavily soiled white fabrics and garments

Sturdy colorfast fabrics and heavily soiled garments

Clothing, bedding and towels requiring

sanitization

No clothes in washer

Wet load of clothes

Swimwear, items that need rinsing

Small loads of 3-4 lightly soiled garments

Sheer fabrics, lingerie, sweaters, and lightly-soiled shirts, blouses, trousers,

cants, and skirts

Bright or darkly colored cottons, linens, casual

and mixed loads

Whites

Heavy

Duty

Eco Sanitize

with Oxi t

Clean

Washer

with

affresh _>

Drain

& Spin

Drain

& Spin

with

Extra Rinse

Quick Wash

Delicates Hot Fast

Cold Cold Fast

Wash Medium

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Not

N/A

Hot

Warm

Cool

Cold

Hot

Warm

Cool

Cold

Warm Medium

Cool Slow

Cold Off

Fast

Medium

Slow

Off

Fast

Medium

Slow

Off

Fast

Medium

Slow

Off

Fast

Medium

Slow

Off

Fast

Medium

Slow

Off

Fast

Medium

Slow

Off

Light

Heavy

Normal

Light

Heavy

Normal

Light

Heavy

Normal

Light

N/A

Heaw TumbleFresh TM

Normal Delay Wash

Light

Heaw TumbleFresh TM

Normal Extra Rinse

Light Delay Wash

Heaw TumbleFresh TM

Normal Extra Rinse

Light Delay Wash

Heaw TumbleFresh TM

Normal Extra Rinse

Light Delay Wash

Delay Wash This cycle is designed to provide

Extra Rinse

TumbleFresh'" @

Delay Wash

Extra Rinse

TumbleFresh_ @

Delay Wash

Extra Rinse

TumbleFreshTM _

Delay Wash

TumbleFresh TM _ Use Drain & Spin to remove excess

Delay Wash _ water from the load. Spin speed

the most energy efficiency. Uses a longer wash time with

fast-speed tumbling, extra rinsing, and a fast-speed spin to provide optimal cleaning and rinsing

when bleach is used. Fast-speed tumbling and a

fast-speed final spin help provide optimal cleaning and reduce drying times.

Using the highest wash temperature available along with an Oxi product

added in the drum ensures sanitization. Check recommended

wash temperature of your items and use the amount of Oxi

recommended by the manufacturer.

Use this cycle every 30 washes to keep the inside of your washer fresh and clean. This cycle uses a higher water level. Use with affresh _>washer cleaner tablet or liquid chlorine bleach to thoroughly clean the inside of your washer. This cycle should not be interrupted. See "Washer Care."

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer with affresh _ cycle. Use this cycle with an empty wash tub. See "Washer

Care" in "Washer Maintenance."

can be set to a slower setting.

Extra Rinse to add water. The cycle

_ Select Drain & Spin; then select

includes a fast-speed spin. For some fabrics, you may wish to set the spin speed to a slower setting.

quickly. This cycle combines

Q For small loads (3-4 items) needed

fast-speed tumbling, a shortened wash time, and a fast-speed spin for reduced drying times.

tumbling and slow-speed spin

This cycle combines slow-speed for gentle fabric care and reduced

wrinkling.

detergent solution along with cold

This cycle uses a concentrated water throughout the cycle to gently lift out stains and care for fabrics.

Model: WFW80HE

Eco Sanitize with Oxi

Ill This washer has an Eco Sanitize with Oxi Cycle that eliminates

99.9% of bacteria typically found on clothing, bedding, and towels, based on independent, third-party laboratory testing. There is no carryover of bacteria between loads after the cycle is complete.

Ill Use the Eco Sanitize with Oxi Cycle to clean heavily soiled,

colorfast fabrics. This combines the hottest water temperature to help ensure the removal of hea W soils and stains. It is recommended that you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.

Load Size Recommendations For best results, follow the load size recommendations noted for

each cycle.

than 1/4 full.

@ mall load: Fill the washer drum with 3-4 items, not more

Medium load: Fill the washer drum up to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes

can tumble freely. For best results, avoid packing tightly.

USING YOUR WASHER

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil. De not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, if not completed during the final installation step, choose the QUICK WASH cycle and

run it without clothes. Use only HE detergent. Use 1/2 the manufacturer's recommended amount for a medium-size load.

This initial cycle serves to ensure the interior is clean before washing clothes.

1, Sort and prepare your laundry

E(ectrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Add laundry products (if desired)

Single-dose laundry packet, Oxi-type boosters, color-safe bleach, or fabric softener crystals can be added to the drum prior to adding laundry.

NOTE: Do not add clothes to washer drum prior to adding laundry products. Always follow manufacturer's instructions.

Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on an inside seam.

iMPORTANT:

[] Empty pockets. Loose change, buttons, or any small object

can plug pumps and may require a service call.

[] Close zippers, fasten hooks, tie strings and sashes, and

remove non-washable trim and ornaments.

[] Mend rips and tears to avoid further damage to items

during washing.

[] Turn knits inside out to prevent pilling. Separate lint-takers

from lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

[] Do not dry garments if stains remain after washing, because

heat can set stains into fabric.

[] Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage to your garments.

3. Load laundry into washer

Place a load of sorted clothes loosely in the washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it firmly until the

latch clicks.

[] Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily. See "Cycle Guide" for loading suggestions.

[] Mix large and small items and avoid washing single items.

Load evenly.

[] Wash small items in mesh garment bags. For multiple items,

use more than one bag and fill bags equally.

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters, color-safe bleach, or fabric softener crystals to dispensers. They will not dispense correctly.

Adjust the selector, based on type of HE detergent used (either liquid or powdered). See "Using the Dispenser

Drawer" instructions on how to use the dispenser.

(if desired)

_6. Add liquid chlorine bleach to dispenser

(if desired)

Add liquid chlorine bleach to the bleach compartment. Do not overfill, dilute, or use more than 2/3 cup (165 mL). Do not use color-safe bleach or Oxi in the same cycle with liquid chlorine bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

7. Touch POWER to turn on washer (optional)

Pour a measured amount of liquid fabric softener into liquid fabric softener compartment. Always follow manufacturer's directions for correct amount of fabric softener based on your

load size. Fabric softener is always dispensed in the last rinse, even if

Extra Rinse is selected. IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup

(60 mL) of fabric softener. Do not fill past the MAX line. Overfilling dispenser will cause fabric softener to immediately dispense into washer.

[] Do not spill or drip any fabric softener onto the clothes. [] Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

;iiiiiWiiiiiiiiiiii,

Slowly close the dispenser drawer. Make sure the drawer is closed completely, then touch POWER to turn on the washer or go to Step 8.

USING YOUR WASHER

8. Select CYCLE*

COLD WASH WHITES

H EAVY

DUTY

QUICK ECO WASH --

DRAIN

&SPIN

Appearance may vary.

CLEANWASHERwithaffr_sh

with Ox[

Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features.

9. Adjust settings, if desired*

10. Select any additional options*

Extra Rinse Tumb[eFresh Cycle Sgnat

Appearance may vary.

To add an option to the cycle, touch its name - Extra Rinse, TumbleFresh, or Cycle Signal. To remove an option from

the selected cycle, touch the option again.

Ho_d 3 secorlds

for Buttor_ Sounds

"[ "[. Setting a delayed wash

Appearance may vary.

The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Wash Temp, Spin, Soil, or Extra Rinse. Adjusting settings will change the Estimated Time Remaining. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle

time.

Appearance may vary.

If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. This will delay the start of the wash cycle by up to 12 hours.

To set a delayed wash:

1. Touch DELAY WASH + and - buttons to set the desired delay time.

2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking.

*Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

1 2. Touch and hold START to begin

wash cycle

Hdd to Start

Touch and hold START to start the wash cycle. To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle. To cancel a cycle, touch POWER.

Once you touch and hold START, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle.

Unlocking the door to add garments: If you need to open the door to add 1 or 2

missed garments, you may do so while the "Add Garment" light is lit.

_;_ Add Garment

Touch START once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close door and touch and hold START again to restart the cycle.

_iiiiii_iiii[i/ii_

Hold to Start

F13.Remove garments promptly

after cycle is finished

for small items between the tub and the washer drum. If you will be unable to remove the load [

promptly, use the TumbleFresh TM option. ::' If selected, the TumbleFresh TM option will [ TumbleFresh

tumble the load periodically for up to 6 hours. Toturn off the TumbleFresh TM option, touch POWER. To set the washer so that the TumbleFresh TM option does not come on for future cycles, touch TumbleFresh.

NOTE: II The door will remain locked while the TumbleFresh 'Moption

is active. To cancel the option and unlock the door, touch POWER.

[] A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry between uses.

WASHER MAINTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer's instructions regarding the amount of HE detergent to use. Never use more than the recommended amount because that may increase the rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor.

2. Use warm or hot water washes sometimes (not exclusively cold water washes), because they do a better job of controlling the rate at which soils and detergent accumulate.

3. Always leave the washer door slightly ajar between uses to help dry out the washer and prevent the buildup of odor-causing residue.

Cleaning Your Front Loading Washer Read these instructions completely before beginning the

routine cleaning processes recommended below. This Washer Maintenance Procedure should be performed,

at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils

and detergent may otherwise accumulate in your washer. Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from the washer.

2. Inspect the colored seal between the door opening and the drum for stained areas or soil buildup. Pull back the

seal to inspect all areas under the seal and to check for foreign objects.

3. If stained areas or soil buildup are found, wipe down these areas of the seal using either of the following

two procedures: a. affresh ®Grit Grabber TM Cloth Procedure:

i. When the cycle is complete, gently pull back the

rubber door seal and clean the entire surface with the rough side of the Grit Grabber TM cloth.

b. Dilute Liquid Chlorine Bleach Procedure:

i. Mix a dilute bleach solution, using 3/4 cup (177 mL)

of liquid chlorine bleach and 1 gallon (3.8 L)of warm tap water.

ii. Wipe the seal area with the dilute solution, using

a damp cloth.

iii. Let stand 5 minutes. iv. Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open.

IMPORTANT:

[] Wear rubber gloves when cleaning with bleach. [] Refer to the bleach manufacturer's instructions

for proper use.

F WASHER CARE (cont.) "_

Cleaning the Inside of the Washer This washer has a special cycle that uses higher water

volumes in combination with affresh ® Washer Cleaner or liquid chlorine bleach to thoroughly clean the inside of the

washer. Steam washer models also utilize steam to enhance cleaning in this special cycle. NOTE: Read these instructions completely before beginning

the cleaning process. Begin procedure

1. affresh ®Washer Cleaner Cycle Procedure {Recommended for Best Performance):

ao Open the washer door and remove any clothing

or items.

bo Add an affresh ®Washer Cleaner tablet to the washer

drum.

co Do not add the affresh ®Washer Cleaner tablet

to the dispenser drawer.

d. Do not add any detergent or other chemical to the

washer when following this procedure.

eo Close the washer door. fo Select the CLEAN WASHER cycle.

g. Touch and hold START to begin the cycle. The Clean

Washer Cycle Operation is described below.

2. Chlorine Bleach Procedure: ao Open the washer door and remove any clothing

or items.

b. Open the dispenser drawer and add liquid chlorine

bleach to the MAX level in both the bleach compartment and the fabric softener compartment.

NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage

over time. co Close the washer door and the dispenser drawer.

d. Do not add any detergent or other chemicals to the

washer when following this procedure.

eo Close the washer door. fo Select the CLEAN WASHER cycle.

g. Touch and hold START to begin the cycle. The Clean

Washer Cycle Operation is described below.

NOTE: For best results, do not interrupt cycle.

Description of Clean Washer Cycle Operation:

1. The Clean Washer cycle will determine whether clothing or other items are in the washer.

2. If no items are detected in the washer, it will proceed with the cycle.

a. If any items are detected in the washer, "rL" (remove

load) will be displayed. The door will unlock. Open washer and remove any garments from the washer

drum.

b. Touch POWER to clear the "rL" code. co Touch and hold START to restart the cycle.

After the cycle is complete, leave the door open slightly to allow for better ventilation and drying of the washer interior.

WASHER CARE (cont.)

f WASHER CARE (cont.)

Cancellation of Clean Washer Cycle Operation: If the Clean Washer cycle is canceled by the user after it has

been initiated, it may take up to 30 minutes for the washer to purge any affresh®Cleaner, chlorine bleach, or other chemistry from the wash system and to adequately rinse any remaining chemistry. The washer door will remain locked until the cancellation process has been completed. This ensures no cleaning chemistry will be carried over to the next wash cycle and reduces the potential for damage to subsequent loads of laundry or to the washer itself.

Clean Washer Cycle Cancellation Procedure:

1. Touch POWER on the washer once.

2. The washer will begin to drain and rinse away the remaining cleaning chemistry.

3. The cycle will complete the cancellation process in approximately 30 minutes or less.

4. The washer then can be used to either repeat the Clean Washer cycle or to wash laundry using one of the regular wash cycles selected by the user.

Cleaning the Dispensers After a period of using your washer, you may find some

residue buildup in the washer's dispensers. To remove residue from the dispensers, remove the drawer and wipe the surfaces with a damp cloth and towel dry either before or after you run the Clean Washer cycle. Use an all-purpose surface cleaner, if needed.

IMPORTANT: Dispenser is not dishwasher safe. Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe up any spills. Occasionally wipe the outside of your washer to help keep it looking new. Use mild soap and water.

IMPORTANT: To avoid damaging the washer's finish, do not use abrasive products.

Removing the Dispenser To remove:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out to remove the dispenser.

--.\

3. Lift off cover panel by pulling straight up.

To replace:

1. Slide cover panel back onto posts on dispenser.

2. Align edges of dispenser with guides in washer,

then slide dispenser back into slot.

WASHER MAINTENANCE

NON-USE AND VACATION CARE

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer to avoid flooding due to water pressure surges.

3. Clean the dispensers. See "Cleaning the Dispensers."

WINTER STORAGE CARE

iMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets, disconnect and drain water inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum and run washer on NORMAL cycle for about two minutes to mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back

of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer drum.

6. Bundle power cord with a rubber band or cable tie to

keep it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts. Do not reuse transport bolts. Washer must be transported in the upright position. To avoid structural damage to your washer, it must be properly set up for relocation by a

certified technician.

f REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage, or moving:

1. Refer to Installation Instructions to locate, level, and connect washer.

2. Before using again, run washer through the following recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through HEAVY DUTY cycle to clean washer and remove antifreeze, if used. Use only HE detergent.

Use half the manufacturer's recommended amount for a medium-size load.

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.whirlpool.com/product_help -

In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.

Once any possible issues are corrected, touch POWER once to clear the code. Reselect and restart the cycle.

"Sd" (Excess suds) Excessive suds in washer. Washer is appears in display running a suds reduction routine.

Check for proper water supply.F8 followed by &' (water supply error) appears in display

F_ followed by El (drain pump system error) appears in display

J_ followed by E2 (door Washer door not locking. Touch POWER to cancel the cycle. Make sure the door is will not lock) appears in closed completely and latching. Check for items in the washer display drum that may be keeping the door from closing completely.

p_ followed by El (motor Motor is having difficulty turning Washer is tightly packed. Remove some items. See "Cycle

drive error) appears in the drum. Guide" for load size recommendations. Make sure that all display shipping materials have been removed. See the hstallation

"rL" (remove load) Load detected in drum during Clean Remove items from washer drum and restart Clean Washer appears in display Washer with affresh ®cycle, with affresh ®cycle.

Washer making error Door has not been opened and closed This code may appear when the washer is first turned on. beeps for at least 3 cycles. Open and close the door to clear the display.

Check plumbing for correct drain

hose installation. Drain hose extends

into standpipe farther than 4_/2"

(114 mm).

Not using HE detergent or using too

much HE detergent.

Allow the washer to continue. Use only HE detergent. Always measure detergent, and base detergent quantity on

load size. Follow detergent manufacturer's instructions.

Both hoses must be attached and have water flowing to the inlet valve.

Both hot and cold water faucets must be on. hlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Touch POWER once to clear the code. Then touch POWER

again to restart washer. Hfcode appears again, call for service. Check drain hose for proper installation.

Make sure the drain hose is not kinked, pinched, or blocked. Remove any clogs from drain hose.

Use drain hose form and securely attach to drainpipe or tub. Lower drain hose if the end is higher than 96" (2.4 m) above

the floor. Use only HE detergent. Always measure detergent and follow

manufacturer's directions based on load size and soil level.

hstructions.

Washer beeps when Door not closed. Close the door completely. START is touched

F# E# code other than System error code. Touch POWER once to clear the code. Then touch POWER as described above again to restart washer. Hfcode appears again, call for service. appears in display

"nt" (interrupted) The cycle was paused or cancelled. The washer can take 20 to 30 minutes to stop spinning and

appears in display drain and will display this error code during that time. Touch

POWER once to clear the code. Then touch POWER again to

restart washer.

+ 33 hidden pages