Whirlpool WAP 9988, STUTTGART 1212, GSXS 7325 BK INSTRUCTION FOR USE

4GB05161.fm Page 1 Monday, May 10, 2004 5:52 PM
GB WAP 9988 PROGRAMME CHART
A. “Start/Pause” button B. Programme selector knob
ABD
G
C
EF
LCD-Display
“Menu” button
D.
I
H
“Up” and Down” buttons
E.
“OK” button for confirmation
F.
“Back” button
G.
“Start Delay” button
H.
“Reset” button
I.
“Info” button
Programme
Cotton
Koch-Buntwäsche
Easy Care
Pflegeleicht
Daily Load
Mischwäsche
Delicates
Feinwäsche
Wool
Wolle
Rapid Plus
Schnelle Wäsche
Handwash
Handwäsche
Rinse & Spin
Spülen + Schleudern
Intensive Rinse
Intensiv Schleudern
Gentle Spin
Schonschleudern
Drain
Abpumpen
Detergent and
Max.
Care
Labels
Normal to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton or linen.
Normal soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trev ira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Normal to lightly to normally soiled textiles made of cotton and/or easy care fibres.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and stated as machine washable.
Lightly soiled outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
Type of wash/
Degree of soiling
–– ––
––
load
Kg
6.0
2.5
3.0
1.5
1,0
3.0
1.0
6.0
6.0
1.5
–––
Additives
Softe-
ner
❉ ❉
Main wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Pre-
wash
❉❉❉ ❉ ❉ ❉ ❉❉
❉❉❉ ❉ ❉
❉❉❉
––
––– –––
Start
Delay
h
Start-
vorwahl
Selectable special options =
Pre-
wash
––
––
–– –
––– –––
––––––––
Intensive
Rinse
Rinse
Hold
Speed
Reduction
1)
Easy Iron
❉❉❉ ❉
1)
1)
❉❉
2)
❉❉❉
1)
Temp e -
Extra
rature
care
°C rpm
20 to 95 1600
❉❉
–– ––
––
–– ––
20 to 60 1000
30 to 60 1600
20 to 40 1000
20 to 40 1000
20 to 60 1600
20 to 30 400
20 1600
–– – –– –
Max.
Spin
Speed
“Prewash” can be additionally selected for heavily soiled laundry at any temperature.
“Prewash” can be additionally selected
1)
for heavily soiled laundry.
Notes
1)
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
If you select “Rinse Hold” do not leave
2)
items to soak for too long. A very gentle spin is used in this programme.
Same as the spin cycle in the “Cotton” programme.
In this programme spinning is intensive.
1600
Same as the spin cycle in the “Cotton” programme.
A very gentle spin is used in this
1)
1000
programme. Same as the spin cycle in the “Wool” programme.
This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
5019 401 05161
4GB05161.fm Page 2 Monday, May 10, 2004 5:52 PM
CONSUMPTION DATA
Programme Temp e rat u re
Cotton Cotton
Cotton with “Extra care”****
Easy Care Easy Care
Daily Load
Delicates
Wool Rapid Pl us Handwash
* Consumption ** The
conditions and adapt the programme run time accordingly.
*** To reduce
drains the water out.
**** Reference Programme for Energy Label
values
programme duration
the water temperature, some cold water is
*
Size of wash
(°C)
95 6.0 49*** 1.90 2:00 60 6.0 44 1.14 2:20 60 6.0 44 1.02 2:30 40 5.0 42 0.70 2:00 60 2.5 55*** 0.70 1:30 40 2.5 50 0.50 1:15 40 3.0 43 0.55 1:00 30 1.5 60 0.50 0:45 40 1.0 60 0.50 0:40 30 3.0 37 0.40 0:30
were measured in normal conditions in compliance with Standard IEC 60456.
may vary from the chart values. The washing machine will allow for individual household
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter “Detergent and Additives” in the booklet.
1. Turn the to the desired programme. This appears in the LCD display, together with spin speed, wash temperature and wash programme duration (in hours and minutes). The indicator light above the
2. Temperature and spin speed can be changed using the
“”
buttons.
3. The additional options available for the wash programme can be selected with the “ ” button.
programme selector knob
“Start/Pause”
button as well as the “ ” and “
button will blink.
in any direction
PRESS THE DESIRED SPECIAL OPTION BUTTON
“Spin Speed”
• A maximum spin speed is assigned to each
programme.
• Press the
appears in the LCD display . The set spin speed blinks and can be changed with the “ ” and “ ” buttons.
• If the spin speed “0” is selected, the final spin is
cancelled. The water is drained out only.
“”
button until “To set Spin Speed”
Water
(kg)
added at the end of the main wash cycle, before the pump
Energy
(l)
(kWh)
Programme duration **
approx.
(hours : minutes)
“Prewash”
• Only for heavily soiled laundry (for example. sand or granular dirt. Programme duration is increased by some 15 min.
“Intensive rinse”
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for areas with very soft water, for washing baby linen and helping people with detergent allergies.
“Rinse hold”
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
• This option is particularly recommended for the programme “Easy Care” or “Delicates”.
• This additional function is particularly useful if you want to postpone spinning to a later time.
Note:
The programme has reached “Rinse hold” when
the corresponding symbol blinks in the LCD.
Terminate the “Rinse Hold” option:
• Press the terminate automatically with the appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “
“Start/Pause”
Start/Pause
button; the programme will
” button.
“Extra care”
• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.
“Easy Iron”
• To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.
STORE INDIVIDUAL PROGRAMME (“Memory”)
• Turn the programme selector to “Memory”.
• Select one of the 10 storage spaces using the “ ” or “ ” button and confirm with “OK”.
• A list of all the available wash programmes appears in the LCD. Select the desired programme with “ ” and “ ” and confirm with “OK”.
• You can then, as already described, select available additional options for the wash programme and set temperature and spin speed as desired.
• When all the settings have been made and confirmed with “OK”, the programme is stored in the selected storage space and can be reselected at any time and run using
“Start/Pause”
.
START DELAY
The “Start Delay” allows you to run the machine at your convenience, for example at night when electricity is cheaper.
• Press the “Start Delay” button. Using the “ ” and “ ” keys, you can set the time on the display to when you want the wash programme to start, then confirm this with “OK”.
• Press the in the LCD display until the preset start time is reached. The wash programme then starts automatically.
• During the programme, the remaining time appears in the LCD.
“Start/Pause”
button. “Start at ...” appears
“Start Delay” correction.
• If you have already confirmed the desired start time with “OK” or have already pressed they can still be changed. To do this, press the “Start Delay” button again. The set time blinks and can be changed with the “ ” and “ ” buttons. Then you only need to confirm the changed time with “OK” again.
“Start/Pause”
,
PROGRAMME START
After you have selected the programme and any additional
button.
“Start/Pause”
options, the indicator light above the button blinks. Turn on the tap and start the programme by pressing the The indicator light above the button will now illuminate.
The stage of the wash programme appears in the LCD, as well as the time remaining until the end of the wash programme.
“Start/Pause”
DOOR LOCK
Within the first 15 minutes after the start of the “Cotton” and “Easy Care” programmes the door can be opened to add further laundry. “You can add an item” will appear in the LCD as long as this option exists. This is not possible if “Rapid Plus ” is sel ected .
PROGRAMME END
• The time remaining on the LCD shows 0:00, and displays “END OF CYCLE”.
1. Turn the programme selector with the marking to the top.
2. Close the water tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the programme. The indicator light flashes.
2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed. In this way you can also select an additional option later, without changing the current programme.
3. Press the programme.
• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Cancel/Delete programme”)
“Start/Pause”
“Start/Pause”
button to interrupt the
button again to re-start the
CANCEL/DELETE PROGRAMME
1. Press the programme. The indicator light flashes.
2. Press the “Reset” button. “Do you want reset” appears in the LCD.
3. Confirm with the “OK” button to start draining the water.
“Start/Pause”
button to interrupt the
Black process 45.0° 100.0 LPI
5019 401 05161
Loading...