Whirlpool WAM 65/1 INSTRUCTION FOR USE

4gb05067.fm Page 1 Tuesday, April 15, 2003 4:59 PM

GB WAM 65/1 PROGRAMME GUIDE

A. “On/Off“ button with indicator light B. Additional functions C. Temperature Knob D. Programme selector knob E. Programme Sequence Indicator:

The running noises of the new, electronically-

controlled motor are not the same as the ones you are used to from your old appliance. Don’t be surprised -

modern technology has a modern sound.

During the selected washing programme the programme selector knob moves by steps clockwise

and could correct itself by half steps.

Coloured cotton

with prewash

Synthetic with

prewash

Delicate with

prewash

Coloured cotton

normal

Coloured cotton

rapid

Synthetic normal

Synthetic rapid

Delicate

Wool

Hand wash

Rinse + Spin

Spin

Gentle spin

Drain

Programme

Kookwas-Bontewas

Voor was

Synthetisch Voorwas

Fijne was Voorwas

Hoofdwas

Hoofdwas snel

Synthetisch

Synthetisch snel

Fijne was

Wol

Handwas

Spoelen + Centrifugeren

Centrifugeren

Kort Centrifugeren

Afpompen

Max.

Care

Labels

Type of wash/

Degree of soiling

Heavily soiled and temperature resistant bed linen, table linen and underwear, towels etc. made of cotton and linen.

Heavily soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses skirts, shirts and blouses.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Lightly soiled outer garments and sportswear made of cotton, polyester, polyamide and cotton blend.

Slightly to normally soiled blouses, shirts etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate dresses, skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

load

–– –– ––

–––––––––

Detergent and Additives Additional selectable functions

5.0

2.5

1.5

5.0

2.5

1.5

1.0

5.0

1.5

Softe-

ner

❉ ❉ ❉

❉

❉ ❉ ❉

Main Wash

Yes Yes

Yes

––

Pre-

Intensive

wash

Rinse

Intensief

Spoelen

❉❉❉ ❉❉❉

–

– –

❉❉❉

❉❉❉ ❉❉❉

–– –– ––

❉❉❉

Spoel Stop

––– – – ––– – –

Rinse

Spin Speed

Hold

Reduction

❉❉

❉❉ ❉❉ ❉❉

❉

If you select “Rinse Hold” do not leave items to soak for too long.

With this programme you can add starch and/or fabric softener. Subsequent spinning is intensive.

In this programme spinning is intensive. Same as the spin cycle in the “Coloured Cotton” programme.

A very gentle spin is used in this programme. Same as the spin cycle in the “Wool” programme.

Drain only - no spinning. Alternative method of terminating the synthetic, delicate and wool programme and for premature removal of the laundry.

Notes

– – –

–

– – –

Option / Yes: dosing required.

❉

For improved garment care spin speed is restricted to 900 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Further advice is to be found in the instructions for use (Subject to technical alterations).

Black process 45.0° 100.0 LPI

5019 401 05067

4gb05067.fm Page 2 Tuesday, April 15, 2003 4:59 PM

CONSUMPTION DATA *

Programme Temperature

Coloured Cotton Coloured Cotton Coloured Cotton

Synthetic Synthetic

Delicate

Wool

Handwash

Consumption values

programme duration

** The

particular household conditions and to adapt the programme run time accordingly.

***To reduce the

the pump drains the water out.

selector knob

(°C)

90 5.0 54*** 1.70 2:00 60 5.0 49 0.95 2:00 40 5.0 49 0.60 2:05 60 2.5 55 0.80 1:30 40 2.5 55 0.60 1:20 40 1.5 60 0.60 0:45 40 1.0 60 0.45 0:40 30 1.0 60 0.30 0:40

were measured in normalized conditions in compliance with Standard IEC 60456.

can also vary from the chart values. The washing machine is able to allow for

water temperature

, some cold water is added at the end of the main wash cycle, before

POUR IN DETERGENT, CLOSE DOOR AND

Load

(kg)

Water

(l)

SELECT SPECIAL OPTIONS

SELECT PROGRAMME

Intensive Rinse

Add the detergent as described in the “Detergent and Additives” chapter of the instructions for use.

1. Turn the

programme selector knob

clockwise to the desired programme.

2. Turn the

temperature selector

in any

direction to the desired temperature.

Special options

can be selected.

4. Check that the door is firmly closed and turn on the washing machine by pressing

“ON/OFF”

the

button. The indicator lights

Increases the rinsing time and water quantity. This additional option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.

Rinse hold

This option is particularly recommended for the programme “Synthetics” or “Delicates”. The laundry remains in the last rinse water without being spun: discoloration of the laundry or additional creasing is prevented.

up, indicating that the washing machine is on.

Energy

(kWh)

Programme duration **

approx.

(hours : minutes)

Terminate the “Rinse Hold” option:

Press the “Rinse Hold” button again; the wash cycle will terminate automatically with the appropriate spin cycle for the current programme.

If you do not wish to spin the clothes, press the Rinse stop button, turn the programme selector knob to the “Drain” programme and switch the machine on again.

Spin Speed reduction

Reduces the preselected maximum spin speed. In some programmes, the final maximum spin speed is limited in order to protect the laundry. Selecting a higher speed is not possible.

CANCEL PROGRAMME

1. Switch off the washing machine by pressing the “

ON/OFF

” button.

2. Set the programme selector to

programme setting “Drain”.

3. Start the programme by pressing the

ON/OFF

“

” button.

PROGRAMME END

• At the end of the programme the

programme selector is located at the “O” end position.

• Switch off the appliance, open the door

and take out the laundry.

• Turn off the tap and leave the door ajar

to allow the drum to dry out.

Black process 45.0° 100.0 LPI

5019 401 05067