Whirlpool WA 4560 INSTRUCTION FOR USE

is a registered trademark

Notes

Indicator:

Wash Rinse Spin

Programme

Thermostat

Selector

knob

❉

Options =

Duration

Spinning

Pre-

Rinse

wash

Hold

Rinse

5019 100 03649

Programme for gentle spin cycle, same as the

spin cycle in the Wool programme.

Drain only without spin cycle.

Alternative way of terminating programmes with

If “Rapid” is selected the options “Saving half

load”, “Intensive Rinse” and “Prewash” are

inhibited.

If “Saving half load” is selected the option

If “Rapid” is selected the options “Saving half

load”, “Intensive Rinse” and “Prewash” are

inhibited.

If “Saving half load” is selected the option

“Intensive Rinse” is inhibited.

115

min.

approx.

Cotton

Cotton/

Coloured

to 95

from cold

cold to 60

Rapid: From

“Intensive Rinse” is inhibited.

Synthetics

to 60

from cold

Delicates

from cold

cold to 60

Rapid: from

40 —

to 40

❉❉❉

If you select the special option “Rinse Hold” don’t

leave garments to soak for too long.

Programme for treating wash with starch or

softener. Terminates with an intensive spin

cycle, same as the spin cycle in the Cotton

Coloured programme.

Wool

to 40

from cold

❉

—

❉

—

Rinse + Spin

Cold

❉

—

❉

—

Gentle Spin

—

❉

“Rinse hold” setting.

—

Draining

PROGRAMME TABLE

Detergent

Max.

and Additives

Load

Degree of soiling

Rapid Intensive

Saving

Pre-

Softener Main

half load

wash

Wash

———

❉❉❉❉❉❉❉

yes

❉

kg °C

5.0

3.0

Rapid

Normal

Lightly to averagely soiled bed

linen, table linen, underwear,

towels, shirts etc. (linen and

cotton) etc.

Normal

Lightly to averagely soiled

❉❉❉❉❉❉❉

yes

❉

2.5 Rapid

blouses, shirts, etc. made of

polyester (Diolen, Trevira),

❉

yes

❉

1.5

Curtains, delicate dresses,

polyamide (Perlon, Nylon) or

blends with cotton.

————

yes

❉

1.0

skirts, shirts and blouses.

Only machine washable woollens

with pure new wool label.

—————

❉

WA 4560

Indicator: Door lock

Programme Care label Type of fabric /

Cotton/

Cotton

Coloured

Synthetics

Delicates

Wool

Rinse + Spin — — 5.0

Gentle Spin— — 5.0————————

Draining— — —————————— —

1) For improved garment care, spin speed is restricted to 900 rpm.

2) The programme duration figures are approximate values for a programme with maximum temperature but without special options.

The programme will continue from where it was interrupted.

TO INTERRUPT THE PROGRAMME:

To interrupt a programme that is already running and then continue later:

1. Set the programme selector knob to “0”.

2. After the required break, reselect the programme.

3. Hold down the “Start” button for about one second.

duration

Programme

Water Electricity

Special

options

load

Maximum

CHANGING PROGRAMME DURING A RUNNING PROGRAMME:

a) TO SELECT A NEW PROGRAMME OR A DIFFERENT TEMPERATURE AND

40 0.90 95

load

Saving half

CONTINUE

1. Select a new programme and/or new temperature.

2. Hold down the “Start” button for about one second.

The new programme will continue from the same programme step where the running

programme was interrupted.

DIFFERENT PROGRAMME FROM THE BEGINNING

There’s no need to add more detergent when you start the new programme, because

the appliance drains only just few water when you cancel the current programme.

1. Hold down the “Start” button for five seconds, or until the programme control

b) TO CANCEL A PROGRAMME THAT IS ALREADY RUNNING AND START A

audibly restarts.

2. Wait until the programme sequence indicator returns to its initial position on the left

(no longer visible).

(if different) and any different special options you require.

3. Set the programme selector to “0”.

4. Set the programme selector knob to the new programme, select the temperature

5. Hold down the “Start” button for about one second.

TROUBLESHOOTING GUIDE:

The appliance is equipped with safety functions able to identify and indicate the presence

of faults and react appropriately.

Most faults are minor problems that can be solved quickly. The following list gives several

examples:

• The appliance fails to start.

• The appliance stops in mid programme.

• No water or insufficient water supply.

• The appliance does not drain.

• The machine vibrates during the spin cycle.

• Final spin results are poor.

• Detergent and additive product residues in the detergent dispenser at end of wash.

The cause and action notes for the above points are given in the instruction for use in the

chapter “Troubleshooting guide”.

(°C) (kg) (l) (kWh) (min.)

knob

Thermostat

Synthetics 60 2.5 60 0.80 80

Programme

Cotton/Cotton Coloured 95 5 60 1.70 115

Cotton/Cotton Coloured 60 5 56 1.10 110

Cotton/Cotton Coloured 60 2.5

Cotton/Cotton Coloured 40 5 56 0.55 95

Cotton/Cotton Coloured 30 3 Rapid 35 0.30 40

Synthetics 40 2.5 54 0.40 70

Power and water consumption data

Wool 40 1 60 0.50 35

Delicate 40 1.5 60 0.50 40

Synthetics 30 1.5 Rapid 25 0.20 35

Pre-wash cycle increases programme duration by approx. 15 minutes.

Consumption data were measured in normalised conditions in compliance with Standard IEC 60 456.

Consumption data in the home may vary with respect to the values in the table in relation to the water supply

pressure and temperature, the load and the type of wash.

ROUTINE WASHES:

1. Turn on the tap.

2. Sort the laundry according to fabric type and colour and load the machine.

3. Close the door.

4. Pour in detergent and additives.

5. Select the programme, the temperature and any special options you require.

6. Hold down the “Start” button for about one second.

NOTE:

During the first 15 minutes of Cotton and Synthetics programmes (each without Prewash)

you can open the door to add items to the wash. This is not possible when the special

function “Rapid” is selected.