Whirlpool W10280477B, W10280478B - SP User Manual
TOP-LOADING
GUIDE D’UTILISATION
HIGH EFFICIENCY
LOW-WATER WASHER
USE AND CARE GUIDE
ET D’ENTRETIEN DE
LA LAVEUSE HAUTE
EFFICACITÉ À FAIBLE
CONSOMMATION D’EAU
AVEC CHARGEMENT PAR
LE DESSUS
Para una version de estas instrucciones en español, visite www.Whirlpool.com
Table of Contents Table des matiéres
WASHER SAFETY .........................................................2
WHAT’S NEW UNDER THE LID? .................................3
CONTROL PANEL AND FEATURES ............................4
CYCLE GUIDE ...............................................................5
USING YOUR WASHER ................................................6
Using Laundry Product Dispensers ...............................7
Starting Your Washer ......................................................7
WASHER MAINTENANCE .................................................9
TROUBLESHOOTING .......................................................11
WARRANTY.........................................................................16
ASSISTANCE OR SERVICE ............................. Back Cover
SÉCURITÉ DE LA LAVEUSE ......................................17
QUOI DE NEUF SOUS LE COUVERCLE? ................18
TABLEAU DE COMMANDE
ET CARACTÉRISTIQUES ..........................................19
GUIDE DES PROGRAMMES ......................................21
UTILISATION DE LA LAVEUSE ..................................23
Utilisation des distributeurs de produits de lessive ..24
Mise en marche de la laveuse .....................................25
ENTRETIEN DE LA LAVEUSE .........................................27
DÉPANNAGE .......................................................................29
GARANTIE ...........................................................................35
ASSISTANCE OU SERVICE ................. Couverture arrière
W10280477B
W10280478B - SP
Designed to use only HE High Efciency
detergents.
Conçue pour l’utilisation d’un détergent haute
efcacité seulement.
WASHER SAFETY
2
WHAT’S NEW UNDER THE LID?
Cleaning with Less Water
Washplate
Traditional agitator-style
washing machine
The most striking difference in your new washer is the
low-water washplate wash system. The washer automatically
adjusts the water level to the load size—no water level selector
is needed.
When loading the washer with dirty laundry, ll it evenly
around the basket wall.
Automatic Load Size Sensing
Once you start the cycle, the lid will lock, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes. You will nd a
step-by-step description in the “Cycle Status Lights” section.
Washer with low-water
washplate wash system
As the washer dampens and moves the load, the level of the
clothes will settle in the basket. This is normal, and does not
indicate that more clothes should be added.
IMPORTANT: You will not see a washer basket full of water
as with your past agitator-style washer.
Choosing the Right Detergent
Use only High Efciency detergents. The package will be
marked “HE” or “High Efciency.” Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using
regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
Use only High Efciency (HE) detergent.
Concentrated Cleaning
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
The washplate moves the load while water is added in small
amounts until the load is wet. This low-water wash method
uses less water and energy compared to a traditional
agitator-style washer.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer.
For example, you may hear a clicking and hum at the beginning
of the cycle, as the lid lock goes through a self-test. There
will be different kinds of humming and whirring sounds as the
washplate moves the load. And sometimes, you may hear
nothing at all, as the washer determines the correct water level
for your load or allows time for clothes to soak.
3
CONTROL PANEL AND FEATURES
1
2
4
WASH CYCLE KNOB
1
Use the Wash Cycle Knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See “Cycle Guide” for detailed descriptions of cycles.
CYCLE OPTIONS
2
When you select a cycle, its default settings will light up. Not
all cycles and options are available on all models.
TEMP
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
• Warm and hot water may be cooler than what your
previous washer provided.
• Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle.
For most loads, use the soil level that is preset with the
cycle you have chosen. For heavily soiled and sturdy
fabrics, press Soil Level to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
Soil Level to select less wash time, if needed. Lighter
soil level setting will help reduce tangling and wrinkling.
SPIN SPEED
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can be
changed. Not all spin speeds are available with all cycles.
• Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
• Slower spin speeds mean less wrinkling, but will leave
your load more damp.
You may also add or remove options for each cycle. Not all
options can be used with all cycles, and some are preset to
work with certain cycles.
EXTRA RINSE
3
This option can be used to automatically add a second rinse
to most cycles.
FABRIC SOFTENER
4
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
4
5
CYCLE STATUS LIGHTS INDICATOR
5
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
Once the lid has locked the second time, the washer will
NOTE: The sensing light may also come on during the
WASH
You will hear sounds similar to the wash cycle as the
SPIN
DONE
Once the cycle is complete, this light will come on.
3
SENSING
When the START/Pause/Unlock button is pressed, the
washer will rst perform a self-test on the lid lock
mechanism. You will hear a click, the basket will make a
slight turn, then lid will unlock briey before locking again.
slowly spin the dry load to estimate the load size and
amount of water needed, and begin adding water. The
washer will then move the load briey, pause to allow
water to soak into the load, and resume adding water. This
process may repeat until the correct amount of water has
been added for the load. You may also hear water owing
through the dispenser, adding detergent to the load.
Wash portion of the cycle. This is normal.
You will hear the washplate moving the load. Unlike
traditional washers, the load is not covered with water.
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils. The
motor sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
washer rinses and moves the load. Fabric softener will
be added if the Fabric Softener option was selected.
Some cycles use spray rinsing.
The washer spins the load at increasing speeds for proper
water removal, based on selected cycle and spin speed.
Remove the load promptly for best results.
LID LOCK
To allow for proper load sensing, the lid will lock and the
Lid Lock light will turn on. This light indicates that the lid
is locked and cannot be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press
START/Pause/Unlock again to resume
the cycle.
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best ts the load
being washed.
Not all cycles and options are available on all models.
Items to
wash:
Machine-wash
silks, handwash fabrics
Small loads,
cottons,
polyester,
perm press
Cottons, linens,
sheets, and
mixed garment
loads
Cottons, sheets,
and mixed
garment loads.
No-iron fabrics,
cottons, perm
press, linens,
synthetics
Large items
such as sleeping
bags, small
comforters,
jackets
Sturdy fabrics,
colorfast items,
towels, jeans
Swimsuits and
items requiring
rinsing without
detergent
Hand-washed
items or dripping
wet items
Heavily soiled
fabrics
No clothes in
washer
Cycle:
Wash/Rinse
Temperature:
Delicate Hot/Cold
Quick
Wash
Normal
Eco
Normal
Casual
Bulky
Items
Heavy
Duty
Rinse &
Spin
Drain &
Spin
Soak Select Soil Level to adjust soaking cycle
Clean
Washer
with
Affresh
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Cold/Cold
Hot/Cold
Warm/Cold
Cool/Cold
Cold/Cold
Hot/Cold
™
Spin
Speed:
High
Low
No Spin
High
Low
No Spin
High
No Spin
High
No Spin
High
Low
No Spin
High
Low
No Spin
High
No Spin
High
Low
No Spin
High
Low
No Spin
No Spin
High
Soil
Level:
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Heavy
Medium
Light
Extra Heavy
Available
Options:
Extra Rinse
Extra Rinse
Extra Rinse
Extra Rinse
Extra Rinse
Extra Rinse
Extra Rinse
Cycle Details:
Use this cycle to wash lightly soiled
garments indicating “Machine Washable
Silks” or “Gentle” cycle on the care label.
Place small items in mesh garment bags
before washing. This cycle uses a higher,
preset water level.
Use this cycle to wash small, lightly soiled
loads of 2-3 items that are needed in a
hurry. This cycle features a spray rinse.
Use this cycle for normally soiled
cottons and mixed fabric loads. This
cycle uses spray rinses. Low Speed Spin
is not available.
The Eco Normal cycle allows you to
increase your energy savings compared to
the Normal cycle. When this cycle is used,
the wash cycle will use cooler wash water
temperatures than the Normal cycle.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts, blouses,
casual business clothes, permanent
press, and blends.
Use this cycle to wash large items such as
jackets and small comforters. The washer
will ll with enough water to wet down the
load before the wash portion of the cycle
begins, and uses a higher water level than
other cycles.
Use this cycle for heavily soiled or
sturdy items. Water-level sensing process
may take longer for some items than for
others because they will absorb more
water than other fabric types.
Combines a rinse and spin for loads
requiring an additional rinse cycle or to
complete a load after power interruption.
Spin speed is selectable; default is high.
This cycle uses a higher, preset water level.
Also use for loads that require rinsing only.
This cycle uses a spin to shorten drying
times for heavy fabrics or special-care
items washed by hand. Use this cycle to
drain washer after cancelling a cycle or
completing a cycle after a power failure.
time. After time has expired, water will
drain but washer will not spin. This cycle
uses a higher, preset water level.
Use once a month to keep the inside
of the washer fresh and clean. Higher
water levels and Affresh® work together
to thoroughly clean the washer interior.
5
USING YOUR WASHER
1. Sort and prepare your laundry
• Empty pockets. Loose change, buttons, or any small object
can pass under the washplate and become trapped, causing
unexpected sounds.
• Sort items by recommended cycle, water temperature,
and colorfastness.
• Separate heavily soiled items from lightly soiled.
• Separate delicate items from sturdy fabrics.
• Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
• Treat stains promptly.
• Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
• Mend rips and tears to prevent further damage to items
during washing.
2. Load laundry into washer
Load garments in loose heaps evenly around basket wall.
Do not wrap large items such as sheets around the washplate;
load them in loose piles around the sides of the basket.
Try mixing different sized items to reduce tangling.
IMPORTANT: Items need to move freely for best cleaning and
to reduce wrinkling and tangling.
Helpful Tips:
• When washing water-proof or water-resistant items, load
evenly. See “Cycle Guide” for tips and more information on
using the Bulky Items cycle.
• Use mesh garment bags to help avoid tangling when washing
delicate or small items.
• Turn knits inside out to avoid pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up
lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
6
Using Laundry Product Dispensers
Liquid
Chlorine Bleach
3. Add HE detergent to dispenser
Detergent tray
Add a measured amount of HE detergent
into detergent tray. This tray holds 3 oz.
(89 mL). Do not overll tray – adding too much detergent may
cause detergent to be dispensed into the washer too early.
IMPORTANT: Use only High Efciency detergents. The package
will be marked “HE” or “High Efciency.” Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will likely result in longer cycle times and
reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer’s instructions to determine the amount
of detergent to use.
Using Oxi or color-safe bleach:
If using an Oxi or color-safe bleach laundry boost product, add
to the bottom of the washer basket before adding clothes.
HELPFUL TIP: See “Washer Maintenance” for information
on recommended method of cleaning washer dispenser trays.
5. Add fabric softener to dispenser
Fabric softener tray
Pour a measured amount of liquid fabric softener
into tray, always follow manufacturer’s directions
for correct amount of fabric softener based on your load size.
Close dispenser drawer, then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected to
ensure proper distribution at correct time in cycle. Do not overll
or dilute. Overlling dispenser will cause fabric softener to
immediately dispense into washer.
If Extra Rinse option is selected, fabric softener will be dispensed
into the last rinse.
It is normal for a small amount of water to remain in the dispenser
at the end of a cycle.
Starting Your Washer
6. Press POWER to turn on washer
4. Add liquid chlorine bleach
to dispenser
Do not overll, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Make sure the dispenser drawer is closed completely, then press
POWER to turn on the washer.
7. Select cycle
Turn cycle knob to choose your wash cycle. For more
information, see “Control Panel”.
7
8. Select cycle settings
Once you select a cycle, the default settings for that cycle will be
lit. Press the cycle settings buttons to change the Temperature,
Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than
your hot water heater setting.
Warm
Some cold water will be added,
so this will be cooler than what
your previous washer provided.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
10. Press START/Pause/Unlock
to begin wash cycle
Press the START/Pause/Unlock button to start the wash cycle.
When the cycle has nished, the DONE indicator will light.
Promptly remove garments after cycle has completed to prevent
odor, reduce wrinkling, and rusting of metal hooks, zippers, and
snaps.
Unlocking the lid to add garments:
If you need to open the lid to add 1 or 2
missed garments, you may do so during the
rst portion of the Sensing step.
Press START/Pause/Unlock; the lid will unlock
once the washer movement has stopped. This
may take several minutes if the load was spinning at high speed.
Then close the lid and press START/Pause/Unlock again to
restart the cycle.
If lid is left open for more than 10 minutes, water will pump out.
Cool - brights/darks
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Cold
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
9. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as Extra Rinse. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
8
WASHER MAINTENANCE
WATER INLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Periodically inspect and replace inlet hoses
if bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of
replacement on the label with a permanent marker.
CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes.
To keep washer interior odor-free, follow this recommended
monthly cleaning procedure:
1. Make sure the washer is empty.
2. Using recommended AFFRESH® washer cleaner, add one
tablet to washer drum
OR
If using liquid chlorine bleach, add 1 cup (250 mL) to liquid
chlorine bleach dispenser.
CLEANING YOUR DISPENSER TRAY
You may nd laundry product residue in your dispenser
trays. To remove residue, follow this recommended cleaning
procedure:
1. Pull tray out until you feel resistance.
2. Lift up slightly, and then continue pulling out.
3. Wash in warm, soapy water, using a mild detergent.
4. Rinse with warm water.
5. Air dry, or dry with a towel, then place back into slot.
IMPORTANT: Dispenser trays are not dishwasher safe.
IMPORTANT: Do not add detergent to CLEAN WASHER
with AFFRESH™ cycle. Do not use more than recommended
amount of bleach to avoid damaging product over time.
3. Close washer lid.
4. Press POWER.
5. Select CLEAN WASHER with AFFRESH™ cycle.
6. Press START/Pause/Unlock. Water will pour into washer
for a moment and pause, lid will lock, then cycle
will continue.
NOTE: For best results, do not interrupt cycle. If cycle must
be interrupted, press POWER and run a RINSE AND SPIN
cycle to ensure cleaner or bleach have been rinsed from
washer.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use all-purpose surface cleaner, if needed.
IMPORTANT: To avoid damaging the washer’s nish, do not
use abrasive products.
NON-USE AND VACATION CARE
Operate your washer only when you are home.
If moving, or not using your washer for a period of time,
follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid ooding due
to water pressure surge.
WINTER STORAGE CARE
IMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE AND SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
9
TRANSPORTING YOUR WASHER
1. Shut off both water faucets. Disconnect and drain water
inlet hoses.
2. If washer will be moved during freezing weather, follow
WINTER STORAGE CARE directions before moving.
3. Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain
hose from back of washer.
4. Unplug power cord.
5. Place inlet hoses and drain hose inside washer basket.
6. Drape power cord over edge and into washer basket.
7. Place packing tray from original shipping materials back
inside washer. If you do not have packing tray, place heavy
blankets or towels into basket opening. Close lid and place
tape over lid and down front of washer. Keep lid taped until
washer is placed in new location.
REINSTALLING/USING WASHER AGAIN
To reinstall washer after non-use, vacation, winter storage,
or moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet
hoses. Turn on both water faucets.
2. Plug in washer or reconnect power.
3. Run washer through BULKY ITEMS cycle to clean
washer and remove antifreeze, if used. Use only HE
High Efciency detergent. Use half the manufacturer’s
recommended amount for a medium-size load.
10
TROUBLESHOOTING
First try the solutions suggested here or visit our website at www.whirlpool.com/help
for assistance and to possibly avoid a service call.
If you experience
Vibration or Off-Balance
Check the following for
proper installation or see
“Using Your Washer”
section.
Noises
Clicking or metallic
noises
Possible Causes
Feet may not be in contact with the
oor and locked.
Washer may not be level.
Load could be unbalanced.
Objects caught in washer
drain system.
Solution
Front and rear feet must be in rm contact with oor, and washer
must be level to operate properly. Jam nuts must be tight
against the bottom of the cabinet.
Check oor for exing or sagging. If ooring is uneven, a 3/4"
(19 mm) piece of plywood under your washer will reduce sound.
See “Level the Washer” in Installation Instructions.
Load dry items in loose heaps evenly around basket wall.
Adding wet items to washer or adding more water to basket
could unbalance washer.
Wash smaller loads to reduce imbalance.
Use Bulky Item cycle for oversized, non-absorbent items such as
comforters or poly-lled jackets.
See “Cycle Guide” and “Using Your Washer” in this Use and
Care Guide.
Empty pockets before washing. Loose items such as coins
could fall between basket and tub or may block pump.
It may be necessary to call for service to remove items.
It is normal to hear metal items on clothing such as metal snaps,
buckles, or zippers touch against the stainless steel basket.
Gurgling or humming
Water Leaks
Check the following for
proper installation:
Washer not performing as expected
Not enough water
in washer
Washer may be
draining water.
Washer not level.
Fill hoses not attached tightly.
Fill hose washers
Drain hose connection
Check household plumbing for leaks
or clogged sink or drain.
Washer not loaded properly.
Load not completely covered
in water.
It is normal to hear the pump making a continuous humming sound
with periodic gurgling or surging as nal amounts of water are
removed during the spin/drain cycles.
Water may splash off basket if washer is not level.
Tighten ll-hose connection.
Are all four ll hose at washers properly seated?
Pull drain hose from washer cabinet and properly secure it to
drainpipe or laundry tub.
Water can back up out of a clogged sink or drainpipe. Check
all household plumbing for leaks (laundry tubs, drain pipe,
water pipes, and faucets.)
Unbalanced loading can cause basket to be out of alignment
and cause water to splash off tub. See “Using Your Washer”
for loading instructions.
This is normal operation for an HE low-water washer. The load will
not be completely underwater. The washer senses load sizes and
adds correct amount of water for optimal cleaning. See “What’s
New under the Lid.”
IMPORTANT: Do not add more water to washer. The added water
lifts the load off the washplate, resulting in less cleaning.
11
Loading...