Whirlpool SGS375H User Manual

MODEL SGS375H
8272369
A Note to You ............2
Range Safety..............3
Parts and Features....5
Using Your Range ......6
Using the Self-
Cleaning Cycle ........24
Caring for Your
Range ......................27
Troubleshooting ......33
Service ....................35
Index ........................39
Warranty ..................40
1-800-253-1301
Call the Consumer Assistance Center
with questions or comments.
Self-Cleaning
Gas Range
TO THE INSTALLER: PLEASE LEAVE THIS INSTRUCTION BOOK WITH THE UNIT.
TO THE CONSUMER: PLEASE READ AND KEEP THIS BOOK FOR FUTURE REFERENCE.
2
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.
– WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
If you cannot reach your gas supplier, call the fire department.
– Installation and service must be performed by a qualified installer, service
agency or the gas supplier.

A NOTE TO YOU

Thank you for buying a Kirkland Signature™ appliance by Whirlpool Corporation.
To ensure that you enjoy years of trouble-free operation, we developed this Use and Care Guide. It is full of valuable information about how to operate and maintain your appliance properly and safely. Please read it carefully.
Also, please complete and mail the Product Registration Card provided with your appliance. The card helps us notify you about any new information on your appliance.
Please record your model’s information.
Whenever you call to request service for your appliance, you need to know your complete model number and serial number. You can find this information on the model and serial number label/plate (see diagram in the “Parts and Features” section).
Please also record the purchase date of your appliance
and your dealer’s name, address, and telephone number.
Keep this book and the sales slip together in a safe place for future reference. It is important for you to save your sales receipt showing the date of purchase. Proof of purchase will assure you of in-warranty service.
Model Number Serial Number Purchase Date Dealer Name Dealer Address Dealer Phone
The Consumer Assistance Center number is toll free.
1-800-253-1301
3

RANGE SAFETY

You will be killed or seriously injured if you don’t follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
Your safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol. This symbol alerts you to hazards that can kill or hurt you and others. All safety messages will be preceded by the safety alert symbol and the word “DANGER” or
“WARNING.” These words mean:
wDANGER
wWARNING
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
continued on next page
Tip Over Hazard A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot. Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details. Failure to follow these instructions can result in death or serious burns
to children and adults.
Making sure the anti-tip bracket is installed:
Slide range forward.
Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.
Anti-Tip Bracket
Range Foot
wWARNING
THE ANTI-TIP BRACKET
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.
4
RANGE SAFETY
– SAVE THESE INSTRUCTIONS –
WARNING: To reduce the risk of fire, electrical
shock, injury to persons, or damage when using the range, follow basic precautions, including the following:
WARNING – TO REDUCE THE RISK OF
TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET SECURELY ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTI-TIP BRACKET.
CAUTION – Do not store items of interest to
children in cabinets above a range or on the backguard of a range – children climbing on the range to reach items could be seriously injured.
Proper Installation – The range, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70.
Be sure the range is properly installed and grounded by a qualified technician.
This range is equipped with a three-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.
IMPORTANT SAFETY INSTRUCTIONS
Disconnect the electrical supply before servicing the appliance.
Never Use the Range for Warming or Heating the Room.
Injuries may result from the misuse of appliance doors or drawers such as stepping, leaning, or sitting on the doors or drawers.
Maintenance – Keep range area clear and free from combustible materials, gasoline, and other flammable vapors and liquids.
Storage in or on the Range – Flammable materials should not be stored in an oven or near surface units.
Top burner flame size should be adjusted so it does not extend beyond the edge of the cooking utensil.
For self-cleaning ranges –
Before Self-Cleaning the Oven – Remove broiler pan and other utensils. Wipe off all excessive spillage before initiating the cleaning cycle.
5
COOK TIME/COOK TIME/
TIMED
BAKE BROIL HEAT
CLEAN
ON
START TIME/ART TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
AUTO CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL
START TIME
COOK
TIME
Oven vent
(p. 22)
Surface burners and grates
(pp. 6, 28-30)
Anti-tip bracket
(p. 3)
Door stop clip
(pp. 30-32)
Model and serial number plate
(behind left side of storage drawer)
Storage drawer
(p. 23)
Left front control knob (Rapid Boil)
Right front control knob
Right rear control knob
Left rear control knob
Electronic
Oven control
(pp. 10-22)
Control panel
(pp. 5, 27)
Automatic oven
light switch
(p. 32)
Gasket
(p. 24)
Surface burner marker
(shows which burner you are setting)
CONTROL PANEL

PARTS AND FEATURES

6

USING YOUR RANGE

USING THE SURFACE BURNERS

NOTE: Do not leave empty cookware, or cookware which has boiled dry, on a hot surface burner. The cookware could overheat, causing damage to the cookware or cooking product.
Using Rapid Boil
Rapid Boil is an adjustable setting for the left front burner which provides an ultra-high heat setting. It can be used to rapidly bring liquid to a boil and to cook large quantities of food.
Easy ways to save energy
When heating large quantities of liquid for foods such as pasta or soup, cover with a lid to help shorten cooking time.
Preheat your pots and pans only when recommended and for the shortest time possible.
Start your food on a higher heat setting, then turn the control to a lower setting to finish cooking.
wWARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of the pan.
Turn off all controls when not cooking. Failure to follow these instructions can
result in death or fire.
RECOMMENDED USE
To light the burner.
To provide highest heat setting.
To start food cooking.
To bring liquid to a boil.
To hold a boil.
To fry chicken or pancakes.
For gravy, pudding, and icing.
To cook large amounts of vegetables.
To keep food warm.
To melt chocolate or butter.
To simmer.
SETTING LIGHT
Rapid Boil
(left front burner)
HIGH
Mid-range
(between HIGH and LOW)
LOW
Burner heat settings
Use the following chart as a guide.
Using the control knobs
Your range comes with electric ignitors. Electric ignitors automatically light the burners each time you turn the control knobs to LIGHT.
Place a filled pan on the burner grate before turning on the surface burner. Do not operate a burner for extended periods of time without having cookware on the grate.
Push in the control knob and turn it counter-
clockwise to the
LIGHT position. The clicking sound is the ignitor sparking. Make sure the burner has lit.
To stop the clicking sound after the burner lights, turn the control knob to the cook setting you want. You can set the control knob
anywhere between HIGH and LOW.
NOTE: All four electric ignitors will click at the same time. However, the burner with the control knob turned to LIGHT is the one that will ignite.
7
USING YOUR RANGE
USING THE SURFACE BURNERS (CONT.)
In case of a prolonged power failure
You can manually light surface burners. Hold a lit match near a burner and turn the control knob to the LIGHT position. After the burner lights, turn the control knob to the setting you want.
Home canning information
The large diameter of most water-bath or pressure canners combined with high heat settings for long periods of time can cause damage to the cooktop.
To protect your range:
Center the canner over the surface burner. Do not extend more than 1 inch outside the burner area.
Do not place your canner on two surface burners at the same time.
Start with hot water, cover with a lid and bring to a boil; then reduce heat to maintain a boil or required pressure levels in a pressure canner.
Refer to your canner manual for specific instructions.
For up-to-date information on canning, contact your local U.S. Government Agricultural Department Extension Office or companies who manufacture home canning products.
Using the right cookware makes a big difference
The pan should have a flat bottom, straight sides, and a well-fitting lid.
Choose medium to heavy gauge (thickness) cookware.
The pan material (metal or glass) affects how quickly and evenly the pan heats.
When using glass or ceramic cookware, check to make sure it is suitable for use on surface burners.
To avoid tipping, make sure pots and pans are centered on the grates.
The pan material affects how fast heat transfers from the surface cooking area through the pa n material and how evenly heat sp reads over the pan bottom. Choo se pans that provide the best cooking results.
Aluminum
• Heats quickly and evenly.
• Use for all types of cooking.
• Medium or heavy thickness is best for most cooking.
• Used as a core or base in cookware to provide even heating.
Cast iron
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Can be coated with porcelain enamel.
Ceramic or ceramic glass
• Heats s low ly a nd uneve nly.
• Use on low to medium settings.
• Follow manufacturer’s instructions.
Copper
• Heats very quickly and evenly.
• Used as a core or base in cookware to provide even heating.
Earthenware
• Can be used for cooktop cooking if recommended by the manufacturer.
• Use on low settings.
Porcelain enamel-on-steel or enamel-on-cast iron
• See cast iron and stainless steel.
Stainless steel
• Heats quic k ly but uneve nly.
A core or base of aluminum or copper on the cookware provides
even heating.
• Can be coated with porcelain enamel.

CHARACTERISTICS OF COOKWARE MATERIALS

Positioning racks and pans
Place the oven racks where you need them before turning on the oven.
To move a rack, pull it out to the stop position, raise the front edge and lift it out.
Be sure the rack(s) is level.
Use pot holders or oven mitts to protect your hands if rack(s) must be moved while the oven is hot.
For best performance, cook on one rack. Place the rack so the top of the food will be centered in the oven.
When cooking with two racks, arrange the racks on the 2nd and 4th rack guides. Two sheets of cookies may be baked if sheets are switched at approximately three quarters of the total bake time. Increase baking time, if necessary.
For best results allow 2 inches of space around each pan and between pans and oven walls.
Extra oven rack position (roasting rack)
Use this rack position when roasting food too large
to be placed on the first rack position.
For proper roasting, follow these guidelines:
To avoid spillage, remove food before pulling out the rack.
Tilt the rack up at the front before pulling it over the door.
Use an adequate amount of liquid in the pan (meat juices or water) so your food does not get overdone.
Extra oven rack position
8
USING YOUR RANGE

USING THE OVEN

Where to place pans:
WHEN YOU HAVE
1 pan 2 pans
3 or 4 pans
PLACE
In center of the oven rack. Side by side or slightly
staggered. In opposite corners on
each oven rack. Stagger pans so no pan is directly over another.
Rack placement for specific foods:
FOOD
Frozen pies, large roasts, turkeys, angel food cakes
Bundt cakes, most quick breads, yeast breads, casseroles, meats
Cookies, biscuits, muffins, cakes, nonfrozen pies
RACK POSITION
1st or 2nd rack guide from bottom
2nd rack guide from bottom
2nd or 3rd rack guide from bottom
NOTE: For information on where to place your rack when broiling, see “Broiling guidelines” later in this section.
9

BAKEWARE CHOICES

Baking performance is affected by the type of bakeware used. Use the bakeware size recommended in the recipe.
BAKEWARE TYPE
Light color ed aluminum
• Light golden crusts
• Even browning
• Use temperature and time recommended in recipe.
Dark aluminum and other bakeware with dark, dull, and/or non-stick finish
• Brown, crisp crusts
• May reduce baking temperature 25°F.
• Use suggested baking time.
• Use temperature and time recommended in recipe for pies, breads, and casseroles.
• Place rack in center of oven.
Ovenproof glassware, ceramic glass, or ceramic
• Brown, crisp crusts
• May reduce baking temperature 25°F.
Insulated cookie sheets or baking pans
• Little or no bottom browning • Place in the bottom third of oven.
• May need to increase baking time.
Stainless steel • May need to increase baking time.
• Crisp crustsStoneware
• Follow manufacturer's instructions.
• Light, golde n crusts
• Uneven browning
BEST USED FOR
GUIDELINES
USING YOUR RANGE

USING ALUMINUM FOIL

NOTE: Do not line the oven bottom with foil or
other liners. It could affect the oven surface as well as the quality of your baking.
Do not cover the entire rack with aluminum foil. It will reduce air circula­tion and give you poor cooking results.
Use aluminum foil to catch spillovers from pies or casseroles by placing foil on the oven rack below. Foil should be turned up at edges and be at least 1 inch larger than dish.
Place tent-shaped foil loosely over meat or poultry to slow down surface browning for long term roasting. Remove foil for the last 30 minutes.
Use narrow strips of foil to shield piecrust edges if browning too quickly.
Display/clock
When you first plug in the range, “PF” will appear on the display until you press any command pad. If “PF” again appears on the display, your electricity was off for a while.
When you are using the oven, the display will show preheat times and temperature settings.
When you are not using the oven, the display shows the time of day.
When showing the time of day, the display will show the hour and minutes.
When you are using the minute timer, the display will count down each minute.
When setting a function, if you do not press START/ENTER within 5 seconds, the Start? indicator light will flash. If you do not press START/ENTER within 5 minutes, the function will be canceled.
When you are using COOK TIME, the display will
show hours and minutes or minutes and seconds.
Indicator lights
An indicator light to the left of the display lights up when you are in a setting. An indicator light on the display lights up when the oven is on.
10
USING YOUR RANGE

THE ELECTRONIC OVEN CONTROL

Using the control lock
The control lock lets you disable the control panel command pads. The control lock comes in handy when you want to prevent others from using the oven.
NOTES:
You can only use the control lock when the oven is not in use or the control has not been set.
Set the control lock when cleaning the control panel to prevent yourself from accidentally turning on the oven.
To lock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and “Loc” will appear on the temperature display for 5 seconds. “Loc” will then appear whenever a command pad is pressed.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds.
You will hear a single tone and “Loc” will disappear from the temperature display.
START
5 SEC
ENTER
START
5 SEC
ENTER
COOK TIME/
TIMED
BAKE
BROIL
HEAT
CLEAN
ON
START TIME/
DELAY
OFF
CANCEL
START
5 SEC
ENTER
TIME
DOOR
LOCKED
BAKE
AUTO
CLEAN
CUSTOM
BROIL
SELF CLEANING OVEN
TIMER
START?
CLOCK
TIMER
• • CANCEL
START
TIME
COOK
TIME
Off/cancel pad
(pp. 12, 14, 16, 20, 26)
Start/enter pad
(pp. 10, 11, 12, 14, 15, 16, 20, 26)
Clock/timer pad
(pp. 11, 12)
Bake pad
(pp. 13, 15)
Start time/ Cook time pad
(pp. 19, 21)
Electronic display
Temperature/ time pad
(pp. 11, 13, 15, 17, 19, 21, 25)
Auto clean pad
(p. 25)
Custom broil pad
(pp. 16, 17)
Indicator lights
(see below )
COOK
TIME
The minute timer does not start or stop the oven. It works like a kitchen timer. It can be set in hours and minutes up to 12 hours, 59 minutes. The minute timer will display minutes and seconds for settings under 1 hour.
1. Press TIMER.
The timer indicator light will light up.
2. Set the interval to be timed.
Press the “up” (s) or “down” (t) pad(s) until the correct time shows on the display.
11

SETTING THE CLOCK

USING YOUR RANGE
1. Press CLOCK.
2. Set the time.
Press the “up” (s) or “down” (t) pad(s) until the correct time shows on the display.
3. Start the clock.
NOTES:
To see the time of day when the clock time is not on the display, press CLOCK.
You must reset the clock if the power goes off for more than 1 second.
CLOCK
PRESS YOU SEE
PRESS YOU SEE
TIME
(example for 5:30)
START
5 SEC
ENTER
OR
PRESS YOU SEE
CLOCK

USING THE ELECTRONIC MINUTE TIMER

PRESS YOU SEE
PRESS YOU SEE
TIME
(example for 10 minutes)
continued on next page
TIMER
TIMER
TIMER
• • CANCEL
3. Start the minute timer.
The minute timer will begin counting down immediately after the timer is started.
When the time is up: You will hear four 1-second tones.
NOTE: To display the time of day while the minute timer is counting down, press CLOCK.
4. To clear the display, turn off the minute timer.
To cancel the minute timer during the countdown:
After setting a function, you must press
START/ENTER to start the function.
12
USING YOUR RANGE
USING THE ELECTRONIC MINUTE TIMER (CONT.)
(time of day)

STARTING/CANCELING A FUNCTION

OFF/CANCEL will cancel any function except
for the clock, minute timer, or control lock.
OFF
CANCEL
START
5 SEC
ENTER
START
5 SEC
ENTER
(display counts down)
YOU SEE
PRESS YOU SEE
PRESS YOU SEE
TIMER
• • CANCEL
PRESS YOU SEE
(twice)
TIMER
• • CANCEL
(time of day)
TIMER
TIMER
Loading...
+ 28 hidden pages