Whirlpool SF5140EEW, SF5140EEN, FGP210EN, FGP210EQ, FGP215EN Dimension Guide

Freestanding Gas Range

PRODUCT MODEL NUMBERS OVERALL DIMENSIONS

CABINET OPENING DIMENSIONS

SF3010E
SF5140E

Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.

Gas supply: Use 3/4" rigid pipe gas supply line
to the range location. A smaller size pipe on long
runs may result in insufficient gas supply. With
L.P. gas, piping or tubing size can be 1/2"
minimum. If local codes permit, it is
recommended that new flexible metal tubing,
design-certified by AGA or CSA,1/2-inch or
3/4-inch I.D., be used for connecting the range to
the rigid gas supply line. A 1/2" male pipe thread is
needed for connection to pressure regulator
female pipe threads. An individual manual shutoff
valve must be located in the same room, but
external to the range.

Electrical: A 120-volt, 60-Hz, AC-only,
10-ampere, electrical supply fused on both sides
of the line. A separate circuit is recommended. A
time-delay fuse or circuit breaker is recommended.

Ref. 4364041

11-20-02

*** Note: 24" min. when bottom of wood or metal cabinet is protected by not

less than 1/4" flame retardant millboard covered with not less than No. 28
MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

30" min. clearance between the top of the cooking platform and the bottom
of an unprotected wood or metal cabinet.

MODEL DIM. "A" DIM. "B" DIM. "C"

36" 36" 36 3-16" 28 3/16"
30" 30" 30 3/16" 22 3/16"
20" 20" 20 1/4" 12 1/4"

DEPTH WITHOUT DEPTH WITH

MODEL OVERALL HEIGHT COOKTOP HEIGHT WIDTH HANDLE HANDLE

DIM. "A" DIM. "B" DIM. "C" DIM. "D" DIM. "E"
36" GAS 46" 36" 36 26" 27 1/8""
30" GAS 40" 36" 30" 26" 27 1/8"
20" GAS 40" 36 1/4" 20 3/16" 24 1/2" 25 1/2"

®