Whirlpool RB1000XKW0, RB1000XKW1, RB1000XKW2 Owner’s Manual
Use
24-1NCH BUILT-INELECTRICOVEN
Model RBI000XK
\
Copy Your Model and Serial Numbers Here
If you need service, or call with a question, have this
information ready:
1. Complete Model and Serial Numbers/from the plale
just behind the oven door],
2. Purchase date from your sales slip,
Copy this information in these spaces Keep this book,
vour warranty and the sales slip together in a handy
place
See the "Cooking Guide" for important safety information.
Oven Door
Slllcone
Heat Seal
Model Number
Seria( Number
Purchase Dote
Servfce Company and Phone Number
Your responsibilities...
Proper installation and safe use of the oven are your personal
responsibilities. Read this "Use and Care Guide"and the "Cooking
Guide" carefully for important use and safety information.
Installation
You must be sure your oven is...
• installed and leveled in a wall or
cabinet that will hoid the weight:
• installed in a well ventilated
area protected from the
weather:
• properly connected to the cor-
rect electric supply and
grounding. [See 'Installation
Instructions."]
Proper use
You must be sure your oven is...
• used only for jobs expected
of home ovens:
• used only by people who can
operate it properly;
• properly maintained
Conten s
_,:?r:1(._r_,: z_ture Control
Uslngthe;_L_-" _1i,? MEALI!r'vlER Clock T
The Oven L,,,-___ ............. 8
TheCver '.,_'_,-" 8
Cleaning and Cu_,ng for Your Oven .... 9
Con, t_olF _' ;_-nor>'., ........... 9
OuterO_e' ?,:: _.,,: ......... 9
Oven Do,.-',r ............ 10
Using Fo: ............. I
Cleaning C:- .:r" . .............. t I
If You Need Serv,ce or Assistance ......... 12
1 Before Cr.__!,r •_orAss_STc_r'ce ........... 12
2 If You Need A._-qstance ........... 12
3, tfYou Need, i.,_-v_ce .............. 12
4. IfYou Ho,,_ ,- : orJlem ................. 12
?
2
i
4
4
4
5
o
6
i
I
J
Trek
\
Using your oven
Automatic MEALTIMER _ Clock Start Time Knob
Oven Selector Oven Temperature Control
Adjustable
Minute Timer
Stop Time Knob Manual Oven Light Switch Oven Signal Light
SETTING THE CONTROLS
BAKING
I. Put oven racks where you want them.
[See page 5 for suggestions.]
2. Set Oven Selectorto BAKE.
3. Set Oven Temperature Control to the bak-
ing temperature you want,
4. Let the oven preheat until the Signal Light
goes off.
S. Put food in the oven.
6. When done baking, turn both knobs to
OFF,
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradu-
ally over the years, The accurate setting of your new oven can seem different.
If you think the oven temperature needs adjusting, follow these steps:
During baking, the elements will turn on
and off to help hold the oven temperature at
the setting. (The top element wlll never turn
red, but wlll be hot.) The Slgnal Light wlll turn
on and off wlth the elements.
Locking Screw Tooth c e ches
1 Pull out the center
of the Oven Tem-
perature Control.
4 Tlghten the locklng screw. Replace the knob. :Tmk
2. Loosen the lock- 3.
ing screw.
To lower the tem-
perature, move
black ring so tooth is
closer to LO. Each
notch equals
about IO'F [5 C),
4. To raise the tem-
perature, move black
ring so tooth is
closer to HI. Each
notch equals
about 10 F (5 C].
Loading...