0124-1~~~
BUILT-IN ELECTRICOVEN
ModelRBlOOOXK
Model RBIOOPXK
Model and Serial
Number Plate
- Broil Element
Oven Rack Guide
-
Bake Element
Removable
- Air-Flow
- slllcone
Oven Door
Heat Seal
y?/@iw-
Copy Your Model and Serial Numbers Here
If you need service. or call with a question. have
InformatIon ready
1
Complete
lust behind the oven door).
2 Purchase date from your Sales slip
Copy this InformatIon In these spaces Keep this book.
your warranty and the sales sltp together in a handy
place
Model and Serial Numbers (from the plate
See the “Cooking Gulde”for important safety
this
Model Number
__
Service Company and Phone Number
-~
Serml Number
Purchase Date
idOrKKJ~iOn.
__-~
Your responsibtltties. l .
Proper installation and safe use of the oven are your personal
responsibilities. Read this “Use and Care Guide”and the “Cooking
Guide”carefully for important use and safety information.
Installation
You must be sure Your oven is...
l
installed and leveled in a wall or
cabinet that wili hcid the weight;
l
installed in a weil ,ven?ilated
area protected from the
weather;
l
properly connecte,a to the cc
rect electric supply and
grounding. (See ‘Installation
Instructions.“)
Proper use
You must be sure your oven is..
l
used only for jobs expected
of home ovens,
l
used only by people who car
operate it properly
l
properly maintained
Tmk
Using your oven
Automatic MEALTIMER’ Clock
Start lime Knob
Oven Selector
Oven Temperature Control
Adjustable
/
Minute Timer
/
Stop lime Knob Manual Oven Light Switch
\
SETTING THE CONTROLS
5. Put food in the oven.
6. When done baking, turn both knobs to
OFF
RESETTING THE OVEN TEMPERATURE CONTROL
Does your new oven seem to be hotter or colder at the same settings than your
old oven? The temperature setting in your old oven may have changed gradually over the years. The accurate setting of your new oven can seem different.
If you think the oven temperature needs adjusting, follow these steps:
OFF
During baklng, the elements will turn on
and off to help hold the oven temperature at
the settlng. (The top element will never turn
red, but will be hot.) The Slgnal Light will turn
on and off wlth the elements.
OFF
Oven Signal Light
I
OFF
1.
Pull out the center
of the Oven Temperature Control.
4
Locking Screw
2.
Loosen the lock-
ing screw.
llghten the locking screw. Replace the knob.
Tooth
3. To lower the temperature, move
black ring so tooth is ring so tooth is
closer to LO. Each closer to HI. Each
notch equals notch equals
about 10°F 15 C).
Notches
Tooth
4. To raise the temperature, move black
about 10 F (5 C).
Notches
‘Tmk