Whirlpool PDT 819 INSTRUCTION FOR USE

GB PDT 819

A. “On/Off” Button (W³./Wy³.)

A

During the selected washing programme the
programme selector knob moves by steps
clockwise through the phases prewash, main
wash, rinse and spin. Each step takes from
some seconds to several minutes.

i : option / Yes : dosing required

1)

For improved garment care spin speed is zero in this

programme.

Programme Care Labels Type of wash / Notes

Cotton with prewash

Synthetics with

prewash

Delicate with prewash Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses.

Cotton Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Cotton short Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Synthetics

Synthetics short Slightly soiled overalls and sportswear made of cotton, polyester, polyamide and blends with cotton.

Delicate Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Wool Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Handwash Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Rinse and Spin

Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear,
shirts etc.).

Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends
with cotton.

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.

With this programme you can add starch and/or fabric softener.

–

The programme ands with an intensive spin cycle.

Max.
Load

kg

4,5

2,5

1,5

5,0

3,0

2,5

2,5

1,5

1,0

1,0

5,0

Detergents and Additives Special options Max.

Softener Main

Wash

Yes Yes

i

Yes Yes

i

Yes Yes – 800 Max. 40°

i

Yes –

i

Yes –

i

Yes –

i

Yes –

i

Yes – – 800 Max. 40°

i

Yes – – 800 Max. 40°

i

Yes – – –

i

i

Pre-

wash

– –

Intensive

Rinse

Intensywne

p³ukanie

i

i

i

i

i

i

i

Temperature

Spin

Speed

rpm

800 Max. 95°

800 Max. 60°

800 Max. 95°

800 Max. 60°

800 Max. 60°

800 Max. 60°

800 –

Selector

°C

1)

Max. 30°

Programme

Selector

1

2

3

4

5

6

7

8

9

10

A

Spin

Gentle Spin

Drain

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

–

In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.

–

Drain only - no spinning.

–

5,0 – – – – 800 –

1,5 – – – – 800 –

– – – – – – –

5019 801 10014

B

C

D

CONSUMPTION DATA

Temperature

Programme

Cotton 95 4,5 49* 1,70 2:05

Cotton 60 5,0 46 0,95 2:20

Cotton 40 4,5 44 0,60 2:05

Synthetics 60 2,0 55 0,80 1:30

Synthetics 40 2,0 55 0,60 1:20

Delicates 30 1,5 60 0,50 0:45

Wool 30 1,0 60 0,30 0:40

Handwash 30 1,0 60 0,30 0:50

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values
in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.

1. Open the tap.

2. Turn the programme selector to the desired
programme.

3. Turn the temperature selector to the desired
temperature.

4. Turn the spin selector to the desired speed.

5. Special options can be selected.

6. Check that the door is well closed and turn
on the washing machine by pressing the
“On/Off” (W³./Wy³.) button. The indicator lights
up, indicating that the washing machine is on.

Selector

(°C)

Load

(kg)

Water

(l)

SELECT ANY DESIRED OPTION

“Intensive Rinse” button (Intensywne p³ukanie)

• The amount of water is increased to ensure a

more intensive rinse.

• This option is particulary suitable for areas with
very soft water, washing baby linen and people
with detergents allergies.

Energy

(kWh)

Approx. Programme

(hours : minutes)

Duration

PROGRAMME CHANGE

To reselect a programme when a cycle has already
begun:

1. Switch off the appliance by pressing the
“On/Off” (W³./Wy³.) button.

2. Select the new programme.

3. Start the programme by pressing the “On/Off”

(W³./Wy³.) button.

END OF WASH CYCLE

1. At the end of the programme the programme
selector moves to the stop position.

2. To unload the machine wait for the door to
unlock (about 1 minute).

3. Switch off the appliance, open the door and
take out the laundry.

4. Close the tap and leave the door ajar to allow
the drum to dry out.

NOTES AND INDICATIONS FOR USE

• WATER LEVEL

It may not be visible as the cycle is optimised
for a minimum water consumption without
compromising washing results.

• SPIN SPEED CONTROL

Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine damage
and excessive vibrations and consequent noise
produced by the machine due to load
unbalance: by selecting high spin speeds the
noise level increases.

• MOTOR NOISE

The running noises of the new, electronically­ controlled motor are not the same as the ones
you are used to from your old appliance. Don't
be surprised - modern technology has a modern
sound.

• CLEANING THE FILTER

To ensure an impeccable function of the pump,
check the filter regularly and clean it if
necessary.

5019 801 10014