Whirlpool OLYMPIA 1200 B INSTRUCTION FOR USE

4GB05194.fm Page 1 Wednes day, July 14, 2004 6:50 PM

GB OLYMPIA 1200 PROGRAMME CHART

This washing machine is equipped

automatic safety functions

diagnose faults at an early stage and react appropriately, e.g.:

A. “Door Locked” indicator

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened.

B. “Pump” indicator C. “Water Tap” indicator

Check your washing machine's water supply.

with

which detect and

F G

D. “Start” button E. Program Sequence Indicator

{

F. “Spin Speed Reduction” button G.“Reset” button H.Selectable programmes

Programme

Cotton

Koch- Buntwäsche

Synthetic

Pflegeleicht

Daily mixed

Mischwäsche

Rapid wash

Schnelle Wäsche

Delicate

Feinwäsche

Wool

Wolle

Handwash

Handwäsche

Rinse + Spin

Spülen + Schleudern

Spin

Schleudern

Gentle spin

Schonschleudern

Drain

Abpumpen

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.

Slightly to normally soiled textiles made of cotton and/ or synthetic fibres.

Hardly worn outer and sports clothing made of cotton, polyester, polyamid and mixed cotton fabrics.

Curtains and delicate dresses, skirts, shirts and blouses. 1.5

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

Textiles made of linen, silk, wool or viscose marked as “handwashable”.

Type of wa sh/

Degree of soiling

–– –– ––

Max.

load

Detergent and Additives

Softener Main

5.0

2.5

3.0

❉

1.0

5.0

1.5

❉

–––––– ––––––

Selectable Special Options =

wash

Yes

Pre-

wash

❉❉❉ ❉ ❉

–– ––

❉❉

–– ––

Pre-

wash

Vorwäsche

–––

❉

Intensive

Rinse

Intensiv

Spülen

Rinse

hold

Spülstopp Schleudern

Speed

reduction

❉❉ ❉

– – –

–

❉❉

❉❉ ❉

❉

Tem pe -

rature

°C rpm

30-40 60-95

30-40-60 1000

40 an d 6 0 1200

30 1200

30-40 1000

cold

30-40

30 400

20 1200 Same as the spin cycle in the “Cotton” programme.

– –

Max.

Spin

speed

1200

1000

1200

1000

– – ––––––– – ––

Notes

“Prewash” can be additionally selected for heavily soiled laundry at any temperature.

“Prewash” can be additionally selected for heavily soiled laundry.

In this programme the spin speed should be adapted to the fabrics.

– –

If you select “Rinse Hold” do not leave items to soak for too long.

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

A very gentle spin is used in this programme. Same as the spin cycle in the “Wool” programme.

This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.

For improved garment care spin speed is restricted to 1000 rpm in this programme.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Black process 45.0° 150.0 LPI

5019 401 05194

4GB05194.fm Page 2 Wednes day, July 14, 2004 6:50 PM

CONSUMPTION DATA

Programme Tem per atu r e

Cotton Cotton

Cotton Synthetic Synthetic

Daily Mixed

Rapid wash

Delicate

Wool

Handwash

consumption values

*The

programme duration

** The

household conditions and to adapt the programme run time accordingly.

*** To reduce the

the water out.

water temperature

Wash

(°C)

(kg)

95 5.0 46 1.90 2:00 60 5.0 42 0.95 2:10 40 5.0 42 0.60 2:10 60 2.5 55 0.80 1:35 40 2.5 50 0.50 1:25 40 3.0 44 0.45 1:00 30 3.0 35 0.30 0:30 40 1.5 55 0.60 0:45 40 1.0 55 0.60 0:40 30 1.0 40 0.30 0:35

were measured in normalized conditions in compliance with Standard IEC/EN60456.

may also vary from the chart values. The washing machine is able to allow for particular

, some cold water is added at the end of th e main wash cycle, before the pump drains

POUR IN DETERGENT, CL OSE THE DOOR AND SELECT A PROGRAMME

Add the detergent as described in the chapter “Detergent and Additives” in the instructions for use.

1. Turn

the programme selector knob

in any direction to the desired programme. The light above the “

” button flashes.

Start

2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.

SELECT SPECIAL OPTIONS - The corresponding lights go on (if not selectable: rapid flashing for 3 seconds)

“Prewash” button

•Only for heavily soiled laundry (e.g. sand or granular dirt). Programme duration is increased by some 15 min.

“Intensive Rinse” button

• An additional rinse cycle is carried out.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with detergent allergies.

Water

Energy

Programme duration

approx.

(l)

(kWh)

(hours : minutes)

“Rinse Hold” button

• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.

• This option is particularly recommended for the programme “Synthetic” or “Delicate”.

• This function is particularly useful if you want to postpone spinning to a later time.

The programme has reached the “Rinse

Note:

Hold” when the corresponding light flashes.

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.

• If you do not wish to spin the clothes, turn the programme selector knob to “Drain” and press the “

” button again.

Start

“Speed Reduction” button

• A maximum spin speed is assigned to each programme.

• Press the button to set another speed for the spin cycle.

• If no light goes on, the final spin is cancelled. The water is only drained out.

PROGRAMME START

After you have selected the programme and the additional option, the indicator light over the

“Start”

the programme by pressing the

button flashes. Turn on the tap and start

“Start”

button.

Now the indicator light above the button goes on. In addition, all programme phases are indicated by

the associated lights. After the end of a programme phase, the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme, only the “End” indicator is still on.

“DOOR LOCKED” INDICATOR

As long as a washing programme is running, the lamp lights up to show that the door cannot be opened. When the lamp goes off, the door can be opened again.

If “

” has been pressed, but the door is not

Start

latched, the “Door Locked” indicator flashes for 10 seconds. The door must be pushed shut within this time. After the 10 seconds, the “Door Locked” indicator goes out and the “Start” button flashes. The door must then be opened and closed again and the “

” button must be pressed.

Start

“TROUBLE” INDICATORS

“Pump”

Waste water is not pumped out. Check wether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

“Water Tap”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

PROGRAMME END

• The “End” indicator goes on.

1. Set the programme selector knob to the “Off” position.

2. Turn off the tap.

3. Open the door and unload the machine.

RESELECT AFTER PROGRAMME START

A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.

1. Press the

button to interrupt the

“Start”

programme. The light flashes .

2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.

3. Press the

“Start”

button again to restart the

programme.

• If you are in the “Prewash” programme step, this additional option cannot be deselected as described (to do this see “Cancel (Reset) a running programme before the end”).

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

Press the “Reset” button for at least 2 seconds. Any existing water is drained out before the door can be opened.

Black process 45.0° 150.0 LPI

5019 401 05194