DESCRIPTION OF THE APPLIANCE
REFRIGERATOR COMPARTMENT
A. Inside light
B. Inside light
C. Adjustable shelf
D. Shelf - drawer lid
E. Crisper
F. Crisper adjustment
G. Meat drawer
H. Meat drawer adjustment
I. Dairy products compartment
J. Door trays
K. 2-litre door tray with bottle holder
L. 0.75 litre door tray
M. “Multiflow” (depending on model)
FREEZER COMPARTMENT
N. Automatic ice-maker
O. Glass shelves / Racks (depending on the
model)
P. Drawer / Bottom basket (depending on the
model)
Q. Drawer / Top basket (depending on the
model)
R. Ice cube drawer
S. Freezer door trays
T. Inside light
8
FIRST USE
Connect the appliance to the water system and power supply (refer to the Installation manual).
When connecting the appliance to the power supply, the display will show the temperatures preset by the
manufacturer.
If the temperature indicator appears, accompanied by the acoustic alarm (which means that the long
black-out alarm has been activated), press the alarm reset button.
Note: After switching the appliance on, it will be necessary to wait for 2 to 3 hours before a temperature
suitable for a standard appliance load is reached.
GUIDE TO SELECTING FUNCTIONS
Stand-by
This function turns off the refrigerator and freezer compartments. To activate the stand-by function,
press the button for 3 seconds: both displays will go off and a dash will appear on the left display. To reset
the function, carry out the same procedure until the previously set temperatures are displayed.
Note: Remember that this operation does not disconnect the appliance from the power supply.
Freezer temperature
The factory-set ideal temperature is -18°C. To change the temperature, press the buttons until the
display shows the required value.
Refrigerator temperature
The factory-set ideal temperature is +5°C.
To change the temperature, press the buttons until reaching the required value that it will be
displayed.
On/off
Use the on/off button to switch the ice maker on or off. When the ice maker is on, the display shows one
of the two icons.
Mode
Press the mode button to select the type of ice desired: crushed or cubes .
USING THE APPLIANCE
9