Before using the dryer carefully
read, Health and Safety and
Use and Care guides.
Keep these instructions close
at hand for future reference.
YOUR SAFETY AND SAFETY
OF OTHERS IS VERY
IMPORTANT.
This manual and the dryer
itself provide important safety
warnings, to be read and
observed at all times.
This is the safety alert symbol.
This symbol alerts you to
potential hazards that can kill
or hurt you and others.
All safety messages will follow
the safety alert symbol or the
word DANGER or WARNING.
These words mean:
DANGER
Indicates a hazardous situation
which, if not avoided, will
cause serious injury.
WARNING
All safety warnings give
specic details of the potential
risk presented and indicate
how to reduce risk of injury,
damage and electric shock
resulting from improper use of
the dryer. Carefully observe the
following instructions.
Failure to observe these
instructions may lead to risks.
The Manufacturer declines any
liability for injury to persons
or animals or damage to
property if these advices and
precautions are not respected.
Very young (0-3 years) and
young children (3-8 years)
shall be kept away unless
continuously supervised.
Children from 8 years old
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
can use this dryer only if
they are supervised or have
been given instructions on
safe appliance use and if
they understand the hazards
involved. Children shall not
play with the dryer. Cleaning
and user maintenance shall not
be made by children without
supervision.
removers, turpentine, waxes
and wax removers should be
washed in hot water with an
extra amount of detergent
before being dried in the
tumble dryer.
Items such as foam rubber
(latex foam), shower caps,
waterproof textiles, rubber
backed articles and clothes or
pillows tted with foam rubber
pads should not be dried in the
tumble dryer.
Remove all objects from
pockets such as lighters and
matches.
Do not use the tumble dryer if
chemicals have been used for
cleaning.
Oil-soaked items ignite
spontaneously, especially
when exposed to heat sources
such as in a tumble dryer. The
items become warm, causing
an oxidation reaction in the
oil. Oxidation creates heat. If
the heat cannot escape, the
item can become hot enough
to catch re. Piling, stacking or
storing oil-soaked items can
prevent heat from escaping
and so create a re hazard.
WARNING
Indicates a hazardous situation
which, if not avoided, could
cause serious injury.
Items that have been soiled
with substances such as
cooking oil, acetone, alcohol,
petrol, kerosene, spot
Never stop a tumble dryer
before the end of the drying
cycle unless all items are
quickly removed and spread
5
out so that the heat is
dissipated.
The last phase of the drying
cycle is done without heat
(cool down phase), to assure
that the laundry stays at a
temperature level which is not
leading to a damaging of the
laundry.
If you want to stack the dryer
on a washing machine, rst
contact our After-Sales Service
to verify if this is possible.
Stacking of a dryer is only
admitted if the dryer is safely
xed on the washing machine
by using an appropriate
stacking kit.
INTENDED USE OF THE
PRODUCT
This dryer is designed solely
for domestic usage. To aim
the dryer as professional use is
forbidden. The manufacturer
declines all responsibility for
inappropriate use or incorrect
setting of the controls.
CAUTION: The dryer is not
intended to be operated by
means of an external timer
or separate remote control
system.
Do not use the dryer outdoors.
Do not store explosive or
ammable substances such
as aerosol cans and do not
place or use gasoline or other
ammable materials in or near
the dryer: a re may break out
if the dryer is inadvertently
switched on.
INSTALLATION
Installation and repairs must
be carried out by a qualied
technician, in compliance with
the manufacturer’s instructions
and local safety regulations. Do
not repair or replace any part
of the dryer unless specically
stated in the user manual.
Children should not perform
installation operations.
Keep children away during
installation of the dryer. Keep
the packaging materials
(plastic bags, polystyrene
parts, etc.) out of reach of
children, during and after the
installation of the dryer.
Use protective gloves to
perform all unpacking and
installation operations.
After unpacking the dryer,
make sure that it has not been
damaged during transport. In
the event of problems, contact
the dealer or your nearest
After-sales Service.
The dryer must be handled
and installed by two or more
persons.
Keep children away during
installation of the dryer.
The dryer must be
disconnected from the power
supply before carrying out any
installation operation.
During installation, make sure
the dryer does not damage the
power cable.
Only activate the dryer when
the installation procedure has
been completed.
After installation of the device
to wait a few hours before
starting it, to acclimatize to the
environmental conditions of
the room.
Do not install your dryer where
it may be exposed to extreme
conditions, such as: poor
ventilation, high temperature
or below 5°C or above 35°C.
The dryer must not be installed
behind a lockable door, a
sliding door or a door with a
hinge on the opposite side to
that of the tumble dryer, in
such a way that a full opening
of the tumble dryer door is
restricted.
The dryer must be placed with
the back towards a wall, to
avoid injuries by touching the
rear panel, which can become
hot during the drying process.
Do not install the dryer in
rooms with poor ventilation.
If you want to install it in a
small storage room, toilet,
bathroom or similar, assure a
good ventilation (open door,
ventilation grid or slot larger
than 500 cm²).
When installing the dryer make
sure that the four feet are
stable and resting on the oor,
adjusting them as required,
and check that the dryer is
perfectly level using a spirit
level.
If possible use a hose to drain
the water directly into the
domestic plumbing system.
This will avoid having to empty
the water container at the end
of each drying cycle, since the
condensation water can be
directly drained away.
Take care not to install the
dryer on a deep-pile carpet.
6
EN
If, due to lack of space, the
dryer must be installed directly
next to a gas or coal stove, a
heat insulating plate (85 x 57 cm)
must be installed in between
and the side of the plate facing
the stove must be covered
with aluminium foil.
The dryer is not designed for
built-in installation.
The dryer can be installed
under a worktop, provided
that adequate ventilation of
the dryer is assured. Install a
ventilation grid (minimum 45
cm x 8 cm), in the rear part of
the worktop under which the
dryer is installed.
ELECTRICAL WARNINGS
Make sure the voltage
specied on the rating plate
corresponds to that of your
home.
For installation to comply with
current safety regulations,
an omnipolar switch with
minimum contact gap of 3mm
is required.
Regulation require that the
dryer is earthed.
For dryers with tted plug,
if the plug is not suitable for
you socket outlet, contact a
qualied technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the dryer to a
socket which can be operated
by remote control.
The power cable must be
long enough for connecting
the dryer, once tted in its
housing, to the main power
supply.
Do not pull the power supply
cable.
If the power cable is damaged
it must be replaced with an
identical one. The power
cable must only be replaced
by a qualied technician
in compliance with the
manufacturer instruction and
current safety regulations.
Contact an authorized service
centre.
Do not operate this dryer if
it has a damaged mains cord
or plug, if it is not working
properly, or if it has been
damaged or dropped. Do not
immerse the mains cord or
plug in water. Keep the cord
away from hot surfaces.
The electrical components
must not be accessible to the
user after installation.
Do not touch the dryer with
any wet part of the body
and do not operate it when
barefoot.
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement.
If the mains lead of this dryer is
tted with a BS 1363A 13amp
fused plug, to change a fuse in
this type of plug use an A.S.T.A.
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse into
fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be retted
when changing a fuse and
if the fuse cover is lost the
plug must not be used until a
correct replacement is tted.
Correct replacement are
identied by the colour insert
or the colour embossed in
words on the base of the plug.
Replacement fuse covers
are available from your local
electrical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will
frequently apply, but a third
type of plug and socket is also
used, the 2-pin, side earth
type.
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualied
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the
maximum load allowed in the
programme chart.
Do not dry unwashed items in
the tumble dryer.
7
Do not overdry the laundry.
Take care that no lint or dust is
accumulated around the dryer.
Fabric softeners, or similar
products, should be used as
specied by the fabric softener
instructions.
CLEANING AND
MAINTENANCE
The dryer must be
disconnected from the power
supply before carrying out
any cleaning or maintenance
operation.
Never use steam cleaning
equipment.
SAFEGUARDING
THE ENVIRONMENT
For dryer models with heatpump technology:
This dryer contains uorinated
greenhouse gas (R134a). The
circuit containing this gas
is hermetically sealed. The
electrical switchgear has a
tested leakage rate of less than
0,1% per year.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is
100% recyclable and is marked
with the recycle symbol:
The various parts of the
packaging must therefore
be disposed of responsibly
and in full compliance with
local authority regulations
governing waste disposal.
SCRAPPING OF
HOUSEHOLD APPLIANCES
When scrapping the dryer,
make it unusable by cutting o
the power cable and removing
the doors and shelves (if
present) so that children
cannot easily climb inside and
become trapped.
This dryer is manufactured
with recyclable
or reusable materials. Dispose
of it in accordance with local
waste disposal regulations.
For further information on
the treatment, recovery
and recycling of household
electrical appliances, contact
your competent local
authority, the collection service
for household waste or the
store where you purchase the
dryer.
This dryer is marked in
compliance with European
Directive 2012/19/EU, Waste
Electrical and Electronic
Equipment (WEEE).
By ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human
health, which could otherwise
be caused by inappropriate
waste handling of this product.
This symbol
on the product or on the
accompanying documentation
indicates that it should not be
treated as domestic waste but
must be taken to an
appropriate collection centre
for the recycling of electrical
and electronic equipment.
8
EN
ENERGY SAVING TIPS
Always dry a full load,
depending on the type of
laundry and the programme/
drying time. For more
detailed information, see the
programme chart.
By preference use the
maximum spin speed allowed
by your washing machine,
since draining the water
mechanically requires less
energy. You will save time and
energy when running your
drying cycle.
Always select the correct
programme/drying time for
the load in order to obtain the
desired drying results.
Select the ‘Gentle’ option only
DECLARATION
OF CONFORMITY
in case of drying small loads.
When drying cotton, for
example, dry Iron Dry and
Cupboard Dry loads together.
Start with the Iron Dry
programme/drying time
setting, remove the laundry
to be ironed at the end of that
cycle and dry the remainder of
the load on the Cupboard Dry
setting.
This dryer has been designed,
constructed and distributed
in compliance with the safety
requirements of European
Directives:
Whirlpool Europe Srl - Socio
Unico, hereby declares that this
Wi-Fi enabled home appliance
is in compliance with the
essential requirements and
other relevant provisions of
Directive 1999/5/EC of 9 March
1999 on radio equipment and
telecommunications terminal
equipment and the mutual
recognition of their conformity
(the R&TTE Directive)
9
The following statements refer to the
portions of this software based in part on
FreeRTOS v7.0.2, http://www.freertos.org.
The use of this software is governed by the
terms of GNU General Public License v. 2,
which is available at: http://www.gnu.org/
licenses/gpl-2.0.html. A copy of the source
code may be obtained by written request
for the software by name to opensource@
whirlpool.com, along with the address for
delivery.
The following statements refer to those
portions of the software copyrighted by
Eclipse Foundation, Inc.
Copyright (c) 2007, Eclipse Foundation, Inc.
and its licensors.
All rights reserved.
Redistribution and use in source and binary
forms, with or without modication, are
permitted provided that the following
conditions are met:
• Redistributions of source code must retain
the above copyright notice, this list of
conditions and the following disclaimer.
• Redistributions in binary form must
reproduce the above copyright notice,
this list of conditions and the following
disclaimer in the documentation and/
or other materials provided with the
distribution.
• Neither the name of the Eclipse
Foundation, Inc. nor the names of its
contributors may be used to endorse
or promote products derived from this
software without specic prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE
COPYRIGHT HOLDERS AND CONTRIBUTORS
“AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING
IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Portions of this software are copyright (c)
Sawtooth Consulting Ltd. 2006-2015 All
rights reserved.
Portions of this software are copyright (c)
Arrayent, Inc. 2015 All rights reserved.
The following statements refer to those
portions of the software copyrighted by
Swedish Institute of Computer Science.
Copyright (c) 2001-2004 Swedish Institute of
Computer Science.
All rights reserved.
Redistribution and use in source and binary
forms, with or without modication, are
permitted provided that the following
conditions are met:
1. Redistributions of source code must
retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must
reproduce the above copyright notice,
this list of conditions and the following
disclaimer in the documentation and/
or other materials provided with the
distribution.
3. The name of the author may not be used
to endorse or promote products derived
from this software without specic prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE
AUTHOR “AS IS”’ AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR BE
LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
The following statements refer to those
portions of the software copyrighted by
Marvell International Ltd.
Copyright (c) Marvell International Ltd.
All rights reserved.
DISCLAIMER. THIS SOFTWARE IS PROVIDED
BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS” AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT OWNER OR CONTRIBUTORS
BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
10
Use and Care guide
PRODUCT
DESCRIPTION
APPLIANCE
EN
3.
5.
7.
CONTROL PANEL
1.
2.
4.
6.
8.
1. Worktop
2. Control panel
3. Water tank
4. Door
5. Door handle
6. Door lter (behind door)
7. Plinth
8. Adjustable feet (4)
18.17.16.15.14.
1.7.2.6.8.4.10.3.9.5.
1. On/Off button (Reset if long
pressed)
2. Settings button
3. Drum light
4. Steam option
5. Remote control button
6. Finish in
11.
7. Drying time
8. Dryness level
12.
9. Options button (Key lock if
13.
long pressed)
10. Start/Pause button
11. OK key (to confirm)
12. UP key
13. DOWN key
14. Options indicators
15. Dryness level indicators
16. Display
17. Eco monitor
18. Programmes area
11
DOOR
To open the door, pull the handle.
If you interrupt a running programme by opening
the door, the programme will be reset if the dryer
door is not closed again within one minute.
To close the door, hold the handle and push so that
you can hear it click shut.
DRUM LIGHT (if available)
• During programme selection: the light goes on for
laundry loading.
• After programme start: the light fades on and o
while the laundry load is detected.
AVAILABLE
ACCESSORIES
STACKING KIT SHELF
by which your dryer can be xed on top of your
washing machine to save space and to facilitate
loading and unloading your dryer in the higher
position.
• After programme end, when you open the door,
the light goes on for a while for unloading the
laundry. Then it goes o to save energy; touch any
button to switch it on again.
Contact our After-Sales Service to check if the following
accessory is available for your dryer model.
12
HOW TO USE
THE APPLIANCE
th
6
SENSE LIVE FEATURE
EN
Thanks to the 6
can be connected to the Internet.
Using the 6
tablet, you can:
• monitor the status of the appliance
• get informed on the programme status
• set and start a programme
• change, modify, or reset a running programme
• access additional contents.
Technical requirements:
• A wireless router 2.4Ghz WiFi b/g/n connected to
the Internet. Please note that the appliance has
to be installed in a place well covered by your
wireless network (good signal strength).
• For Android users: a smart phone running
Android 4.3 (or higher) with a 1280x720 screen
resolution (or higher).
• For iOS users: a smart phone or a tablet running
iOS 8 (or higher).
th
Sense Live feature, your appliance
th
Sense Live app on your smartphone /
In order to use this feature you need to download
and install the 6
device, register your dryer using the application
and connect it to your home wireless network.
Find detailed information on how to use the 6
Sense Live feature in the "6
Setup procedure" section or in the 6
app.
th
Sense Live app on your external
th
Sense Live Feature /
th
Sense Live
th
13
FIRST TIME USE
1.WHEN SWITCHING ON THE DRYER FOR THE
FIRST TIME, YOU WILL BE ASKED TO
Set the desired language
Press the UP or DOWN key to select the desired
language,
and conrm by pressing the OK key.
Adapt the value for your local water
conductivity
The drying results are aected by the conductivity
of the water used during washing. If, by modifying
the available dryness levels (iron dry; cupboard dry;
extra dry), you are not satised with the nal drying
results, you can adapt the water conductivity level.
2.CHECK WATER TANK
Make sure that the water tank is correctly inserted
3.CHECK DRAIN HOSE
Make sure that the drain hose on the back of the
dryer is xed, either to the dryer’s water tank or to
your domestic sewage system (see INSTALLATION
GUIDE).
The dryer comes with preset level 2.
Choose between level 1 (most damp results) and 5
(most dry results) by pressing the UP or DOWN key.
Conrm by pressing the OK key.
Set the dryer to recall the last used programme
setting or not
Press the UP or DOWN key to select one of the
following settings
On: the dryer recalls the programme which you
used last when switching on the appliance.
O: Eco Cotton is selected by default when
switching on the appliance.
Conrm by pressing the OK key.
These settings can be changed later, if needed.
Refer to section FUNCTIONS / Settings.
14
DAILY USE
EN
WARNING
or matches remain in the
laundry.
1.LOAD THE LAUNDRY
Respect the care labels of your laundry; make
sure that it is appropriate for being treated in
a dryer.
Drying Care Labels
The dots indicate the temperature degree for
drying the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
Open the door and load the laundry. Observe
the maximum load sizes given in the section
Programmes.
Make sure that no lighters
Make sure that the
laundry is not soaked with
ammable liquids.
panel. Programme name and default
duration appear on the display.
Find more information regarding
programmes in section PROGRAMMES and in
the Daily Reference Guide.
Select programme
Press the symbol of the needed programme
on the control panel; programme name and
default duration appear on the display.
This programme position oers a choice
of special programmes, which you can
select by pressing the UP or DOWN key; the
selected programme appears on the display.
Afterwards press OK key to conrm the
desired programme.
Find more information regarding
programmes in section PROGRAMMES.
2.CLOSE THE DOOR
Make sure that no laundry gets stuck
between door glass and door lter.
Close the door so that you can hear it click
shut.
3. SWITCH ON DRYER
Press the On/O button « until the
programme button lights up. An animation
occurs, and there is a sound. Afterwards the
dryer is ready to be operated.
4. SET THE DESIRED PROGRAMME
Press the programme symbol on the control
Select Drying time, if needed
Only if you have selected programme Drying
time or Airing «, you can set the desired drying
time from a minimum of 10 minutes to
maximum 180 minutes (three hours).
Press the Drying time button; the display
indicates that the drying time can be set.
Press the UP or DOWN key, or press the
Drying time button repeatedly, to select the
desired drying / airing time.
Set dryness level, if needed
If you want to change the dryness level, press
the Dryness level button; the display indicates
that the dryness level can be set.
Press the UP or DOWN key, or press the
Dryness level button repeatedly, to select the
desired dryness level.
Select options, if needed
If you want to select additional options, press
the Options button. The options which are
15
selectable for your programme are indicated
on the display.
Press the UP or DOWN key to navigate
through the list of available options. The
selected option blinks. To conrm selection,
press the Ok key. The corresponding symbol
over the display lights up.
Some options / functions can be selected by
directly pressing the button.
programme on pause
• change your settings
• press Start/Pause again to continue the
programme.
7. CANCEL A RUNNING PROGRAMME, IF
NEEDED
Press and hold the On/O button « until the
display indicates that the programme is
cancelled.
WARNING
Refer to section OPTIONS, FUNCTIONS
AND INDICATORS for more information.
5. START PROGRAMME
Press and hold Start/Pause « until the button
lights up solidly and the display indicates that
the programme starts.
The duration can be recalculated and
adapted in the course of the programme.
During such phases, an animation occurs on
the control panel.
6. CHANGE THE SETTINGS OF A
RUNNING PROGRAMME, IF NEEDED
You can still change some settings after a
programme was started:
• Adjust drying time (only if programme
Drying time or Airing is selected)
• Adjust or cancel Finish in, if a delay was
selected and started
• Add or cancel an option, provided the
progress of the programme still allows it.
Press the relevant button. The selected
setting will blink for a few seconds.
While blinking, you can adjust the setting by
pressing the UP or DOWN key. If the value or
setting stopped blinking, press the button
again.
After a setting has been changed, the
programme continues automatically.
After cancelling a running programme,
quickly remove all items and spread
them out so that the heat is dissipated.
8. SWITCH OFF THE DRYER AFTER
PROGRAMME END
The display indicates that the cycle has
nished. Press On/O button « to switch o
the dryer. Open the door and take out your
laundry.
The dryer switches o automatically in about
a quarter of an hour after programme end, to
save energy.
If not switched o right after programme
end, the dryer will tumble the laundry for
about 10 minutes, to prevent creasing. The
display shows an animation.
9. EMPTY WATER TANK / CLEAN DOOR
FILTER / CLEAN BOTTOM FILTER
Empty
• the water tank after each programme
Clean
• the door lter after each programme
• the bottom lter after every fth
programme.
Refer to section CARE AND MAINTENANCE
16
To change the settings of a running
programme or delay, you can also:
• press Start/Pause to put the running
PROGRAMMES
Meaning of the care labels:
The dots indicate the temperature degree for drying
the laundry.
Normal temperature
Reduced temperature
Do not tumble dry
EN
PROGRAMMEType of Drying
and Recommendations
ECO COTTONStandard cotton programme, suitable
to dry normal wet cotton laundry.
Most ecient programme in terms of
energy consumption for drying cotton
laundry. The values on the Energy
Care
Labels
Regulations
max. load (kg): max
defaultprogramme
duration (h): 2:10
selectableoptions:
Fresh care
Label are based on this programme.
COTTONFor drying cotton laundry.max. load (kg): max