HOB 612 PRODUCT DESCRIPTION SHEET
GB IE
Radiant cooking zone
1.
Ø 180, 1550 W
Radiant dual cooking zone
2.
Ø 210 x 120, 2250 W
Halogen cooking zone
3.
Ø 145, 1100 W
Radiant cooking zone
4.
Ø 145, 1100 W
Display
5.
HOB MOUNTING DIMENSIONS
5019 619 60091
A B
The button must be pressed for about 2 sec. to switch the hob on.
The indication 0 appears in area A on the 4 displays. If within about 25 sec. none of the cooking
zones is activated, the hob switches itself off automatically on safety grounds.
Choose the button for the desired cooking area and press it.
The display of the chosen cooking area becomes brighter.
Press the +/- buttons in area B within 5 sec. to adjust the required cooking setting. The first two
cooking steps correspond to the Gentle heat function and the Keep hot functions (if provided).
The other selectable cooking settings go from 1 - 10. The highest selectable cooking setting
equates to the TURBO setting (if provided). The special functions GENTLE HEAT, KEEP HOT
and TURBO HEAT are indicated in the display by a red arrow. All selections are stopped and
cancelled by simultaneously pressing the + and - buttons.
IMPORTANT
depending on the set power output, switches off the cooking zone at maximum power at the
earliest after one hour or after 6 hours at minimum power, if no setting change takes place.
The Dual and Fast boil SPECIAL FUNCTIONS of each cooking area can be switched on or off with this
button. The appropriate cooking area must be switched on for the special functions to be selected.
The following special functions are available (if provided):
: For safety reasons, the hob is equipped with an automatic cut-off function, which,
C
DUAL ZONE FUNCTION Enables the external heating ring of the cooking zone to be
The CHILD SAFETY function is switched on with this button and indicated by an additional red
control LED. With the exception of the hobs On and Off buttons, all other buttons are locked.
This function remains on even after the hob has been switched off and on again and can be
cancelled by pressing the button again for 2 seconds.
RESIDUAL HEAT INDICATOR The residual heat indicator H goes on or
switched on.
flashes alternating with 0 with the switched off
cooking zone while the temperature is still above
the safety limit.