GB User and Maintenance Handbook
Also contains instructions and regulations for safe installation.
Before installing or using the hood, carefully read and follow the instructions given in this handbook and in the enclosed installation handbook.
WARNING: Be sure to observe the minimum installation distance from cookers, which is indicated in the installation handbook.
If the installation instructions for the gas cooker specify a greater distance, this must be taken into account.
5019 618 33092/A |
LI25PA |
SAFEGUARDING THE ENVIRONMENT
1. Packing
Packing materials are 100% recyclable and are marked with the recycling symbol 
.Comply with the local regulations for disposal. The packing materials (plastic bags, polystyrene, etc.) are a potential source of danger and must be kept out of the reach of children.
2. Product
This appliance is marked in compliance with European Directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
By ensuring that this appliance is correctly scrapped, the user can help prevent potentially harmful consequences for the environment and the health of people.
The symbol 
on the product or the accompanying documentation indicates that this product should not be treated as domestic waste but must be taken to a suitable collection centre for the recycling of electrical and electronic equipment. Disposal must be carried out in compliance with local regulations on waste disposal.
For further information on the treatment, recovery and recycling of this product, contact the competent local office, the household waste collection service or the shop where you purchased the appliance.
IMPORTANT INSTRUCTIONS FOR SAFETY
WARNING: To reduce the risk of accidents, electric shock, injury or damage, when using the hood comply with the basic precautions, including the following.
1.Always disconnect the hood from the power supply before carrying out any installation or maintenance operation on the appliance.
2.Installation must be carried out by a specialised technician, in compliance with the manufacturer’s instructions and local safety regulations.
3.Earthing of the appliance is compulsory. (Not possible for Class II hoods).
4.Never use multisockets and extension leads.
5.The electrical components must no longer be accessible to the user after installation.
6.Do not touch the hood with wet parts of the body or use it when barefoot.
7.Do not pull the appliance power cable to unplug it.
8.After-sales service – do not repair or replace any part of the hood unless specifically indicated in the manual. All other maintenance services must be carried out by a specialised technician.
9.When drilling the wall, make sure not to damage the electrical connections and/or pipes.
10.The ventilation ducts must always discharge to the outside.
11.The Manufacturer declines any liability for improper use or incorrect setting of the controls.
12.The appliance is not intended for use by children or persons with limited physical, sensory or mental abilities or without experience and knowledge of it, unless they are under the supervision of or instructed in its use by a person responsible for their safety.
13.Keep children away.
14.To reduce the risk of fire, only use a metal inlet duct.
15.Children must be supervised so that they do not play with the appliance.
16.The product must be disposed of in compliance with local regulations on waste disposal.
17.For further information on the treatment, recovery and recycling of this product, contact the competent local office, the household waste collection service or the shop where you purchased the appliance.
18.Regular cleaning and maintenance is essential for correct hood operation and good performance. Frequently clean all encrustations from dirty surfaces to prevent the accumulation of grease. Regularly clean or replace filters.
19.Do not “flambé” food under the hood. Naked flames could cause a fire.
20.The room must have adequate ventilation when the hood is used at the same time as appliances operating on gas or other fuels.
21.The discharge air must not be eliminated in a duct used to remove fumes produced by appliances operating on gas or other fuels, but must have a separate outlet. All the national regulations on air discharge envisaged by art. 7.12.1 of CEI EN 60335-2-31 must be observed.
22.If the hood is used together with other appliances operating on gas or other fuels, the negative pressure in the room must not exceed 4 Pa (4 x 10-5 bar). Therefore, make sure the room is adequately ventilated.
23.Do not leave pans unattended when frying, since the cooking oil could catch fire.
24.Make sure the lamps are cold before touching them.
25.The hood is not a shelf, therefore do not overload or place objects on it.
26.Do not use or leave the hood without its lamps correctly installed - risk of electric shock.
27.Wear work gloves for all installation and maintenance operations.
28.The product is not suitable for outdoor use.
29.The air sucked by the hood must not be eliminated through the same flue of the heating system or other appliances using gas or other fuels.
5019 618 33092/A |
LI25PA |
|
GB |
Electrical connection
The mains voltage must match that given on the rating plate located inside the hood. If provided with a plug, connect the hood to a socket complying with the current regulations and located in an accessible area. If it does not have a plug (direct connection to the power supply) or if the plug is not in an accessible place, fit a suitable double-pole switch that ensures complete disconnection from the power supply in category III overvoltage conditions, complying with the installation rules.
WARNING: Before reconnecting the hood circuit to the power supply and checking correct operation, always make sure the power cable is correctly fitted and that it was NOT crushed in its housing during installation. Make sure to have this operation carried out by a specialised technician.
Cleaning the hood
WARNING: Failure to remove oil/grease (at least once a month) could result in fire.
Use a soft cloth with a neutral detergent. Never use abrasive substances or alcohol.
Before using the hood
Please read these instructions carefully and keep them for future reference, in order to ensure best use of your hood. The packing materials (plastic bags, polystyrene, etc.) are a potential source of danger and must be kept out of the reach of children.
Make sure the hood has not been damaged during transport.
Declaration of conformity
This product has been designed, manufactured and put on the market in conformity with:
-safety objectives of the “Low Voltage” Directive 2006/95/EC (which replaces 73/23/EEC as amended)
-protection requirements of “EMC” Directive 89/336/EEC amended by Directive 93/68/EEC.
Troubleshooting guide
If the hood does not work:
•Is the plug properly inserted in the power socket?
•Is there a power failure?
If the hood is not extracting enough:
•Is the right speed selected?
•Do the filters need cleaning or replacing?
•Are the air outlets blocked?
If the lamp does not work:
•Does the lamp need replacing?
•Is the lamp correctly fitted?
AFTER-SALES SERVICE
Before calling the After-Sales Service
1.Check to see if you can fix the problem yourself (see “Troubleshooting Guide”).
2.Switch the appliance off and then on again to check if the problem has been eliminated.
3.If the problem persists, contact the After-Sales Service.
Specify:
• the type of fault,
• the product model given on the dataplate inside the hood, visible on removing the grease filters,
• your full address,
• your telephone number and area code,
• the Service code (the number under the word SERVICE on the dataplate inside the hood, behind the grease filter).
If any repairs are necessary, contact an authorised Service Centre (to ensure the use of original spare parts and correct repair).
Failure to comply with these instructions can compromise the safety and quality of the product.
5019 618 33092/A |
LI25PA |
|
GB |
Loading...