FRAMTID HGA4K PRODUCT DESCRIPTION SHEET
DE GB FR NL BE |
Operation of burners
To light one of the burners:
•Press the relative knob and turn it
anti-clockwise to the large flame setting |
. |
•At the same time, press the button with the
star .
The spark plug gives out a spark that causes the burner to ignite.
•Once the burner is lit, keep the knob pressed for about 10 seconds.
If the burner fails to light, repeat the above steps.
1. Removable panstand grids
2-3. Medium burners
4.Large burner
5.Small burner
6. Medium burner control knob
7. Medium burner control knob
8. Large burner control knob
9. Small burner control knob
10. Electric ignition button
Symbols
Shaded circle |
Tap closed |
|
Large flame |
Maximum opening/ |
|
delivery |
||
|
||
Small flame |
Minimum opening or |
|
reduced delivery |
||
|
Note:
—Should particular local conditions of the delivered gas make the ignition of the burner difficult, it is advisable to repeat the operation with the knob turned to the small flame setting .
—The burner safety system serves to prevent the emission of gas if the flame should be extinguished accidentally (draughts, interruptions in gas supply, dousing with liquids, etc.).
For BELGIUM: replace the gas fitting with the one supplied (this job must be done by a qualified technician).
5019 619 01342 |
HB G11 |