Whirlpool GSFP 2788 WS INSTRUCTION FOR USE

Before using the dishwasher, read the user instructions!

GSFP 2788

 

Quick Reference Guide

 

 

 

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Programme selector knob

On / Off button

Start button

Switches “on” when the dishwasher is operating. Flashes when a fault occurs. Switches off at the end of the programme.

Indicators

Add regeneration salt

Only add regeneration salt immediately before starting a wash programme.

Add rinse aid

No water

Check that the appliance fills with water.

Wash cycle

 

 

 

 

 

 

Programme

Pre-Rinse Washing Drying

 

 

end

 

 

 

 

 

 

Options

Time and failure display 3)

Indicates in hours the time remaining until the start of the wash cycle.

Switches off when the programme starts and indicates the time remaining in hours and minutes.

“F...” Information for the After-Sales Service

“Delayed start” button

The wash cycle can be programmed to start after 1 - 24 hours. With each successive touch of the button, the delayed start indicator increases by 1 hour, and after 24 returns to 00. Then press the Start button. The dishwasher will start at the set time.

“Half load” button

This function can be used with any programme. The indicator lamp switches on. The wash cycle is activated for the upper or lower rack only.

 

 

Programme chart

Detergent 2)

Consumption 3)

 

Programmes

 

Loading instructions

A

B

Litres

kWh

Minutes

 

 

 

 

 

 

 

 

 

 

Pre-Rinse

cold

Crockery to be washed later.

-

-

4.0

0.03

14

 

 

 

 

 

 

 

 

 

 

Glass

40°C

Light soiling, for example glasses and cups.

X

-

11.0

0.80

55

 

 

 

 

 

 

 

 

 

 

Rapid 30 min

40°C

Lightly soiled crockery with no dried-on food.

X

-

11.0

0.65

30

 

 

 

 

 

 

 

 

 

 

Eco

50°C

Normally soiled crockery.

X

-

11.0

1.30

80

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standard 1)

50°C

Normally soiled crockery.

X

X

14.0

1,20

135

 

 

 

 

 

 

 

 

 

 

Normal

65°C

Normally or heavily soiled crockery.

X

X

14.0

1.50

95

 

 

 

 

 

 

 

 

 

 

Intensive

70°C

Heavily soiled crockery, especially pots and

X

X

20.0

2.00

130

 

 

 

pans.

 

 

 

 

 

1)Reference programme for energy label in compliance with EN 50242 regulations;

2)Refer to “User instructions“;

3)Program data obtained in conformity with European standard EN 50242. Values may vary in relation to usage, e.g.: different loads, water temperatures - above or below 15°C - as well as water hardness and power supply voltage, etc.

Important information for Test Laboratories:

For detailed information on the EN comparison test and other tests, contact the following address: “nk_customer@email.whirlpool.com”.

5019 496 90294

(We reserve the right to make technical modifications)

BK/I/B/GB

Whirlpool GSFP 2788 WS INSTRUCTION FOR USE

How to use the appliance

Further indications are given in the single chapters and in the user instructions.

Switch on the appliance

Press the ON / OFF button.

 

 

 

 

Large compartment A:

 

 

 

 

 

 

 

 

With each wash cycle.

A B

C

How to fill the

detergent dispenser

Small compartment B:

 

 

 

 

For programmes with pre-wash only.

 

 

 

 

Mechanical indicator C.

 

 

Check the

 

 

rinse aid level

Electric indicator on control panel (if provided).

 

 

 

 

 

 

Check the regeneration salt level

Load the racks

Close the door, turn on the water tap

Select a programme

Select additional options

Press the START button

Wash cycle

Switch off the appliance

Shut off the water tap, unload the racks

On models with water softener system only.

Mechanical indicator D.

Electric indicator on control panel (if provided).

Refer to the dishwasher loading instructions.

The last programme selected will light up.

Select the desired programme (using the specific button or knob). The corresponding indicator lamp lights up.

If necessary (and if provided) the corresponding indicator lamp lights up.

The selected programme is then memorised (even in the event of power failure).

“Change programme”

Press the START button for 2 sec. until the Start indicator lamp switches off; Select another programme and press the START button again.

-Only open the dishwasher if necessary (Warning: beware of hot steam).

-If the appliance is switched off during a wash cycle, when switched on again it will resume the cycle from where it was interrupted.

Only after the START button has switched off: Press the ON / OFF button. All the indicator lamps switch off.

Warning: when the door is opened steam comes out!

Unload the appliance, starting from the lower rack.

BK/II/B/GB

Loading...
+ 2 hidden pages