WHIRLPOOL FRESH CARE 6112 Daily Reference Guide

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

CONTROL PANEL

1 “ON/OFF” button 2 Programme selector 3 “Start/Pause” button 4 “Spin” button 5 “Start delay” button 6 “FreshCare+” /

“Key lock“button

7 “Temperature” button

DISPLAY INDICATORS Door locked

FreshCare+ activated Start delay activated

PROGRAMME CHART

Before using the appliance carefully read the Safety Instruction.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

6.7.

2.1. 3. 4. 5.

Key lock activated Washing phase

Indicates washing phase of the cycle Failure: Call Service

Refer to Troubleshooting section Failure: Water lter clogged

Water cannot be drained; water lter might be blocked

Failure: No water No or not sucient inlet water.

In the event of any failure, refer to the “TROUBLESHOOTING” section

Power consumption in o -mode 0.5 W / in left-on mode 8.0 W

Max load 6 Kg

Temperatures

Programme

Default Range

Max. spin

speed

(rpm)

Max load

(kg)

Duration

(Minutes)

Mixed 40°C - 40°C 1000 3 ** –

White 60°C

Cotton 40°C

Cotton 60°C

Sport 40°C

Duvet 30°C

Jeans 40°C

- 90°C 1200 6.0 **

- 60°C 1200 6.0 240 –

- 60°C 1200 6.0 210 –

- 40°C 1200 6.0 240 –

- 40°C 600 2.5 ** –

30°C

1000 1 ** –

- 40°C 800 2.5 ** –

Detergents and additives

Prewash

Main wash

Softener

 

 (90°)    

   

 

Recommended

detergent

Powder Liquid

–



53 1,00 63

53 0,81 50

53 1,00 63

Spin + Drain - - 1200 6.0 ** – – – – – – – –

Rinse + Spin - - 1200 6.0 ** – –

Rapid 30’ 30°C

- 30°C 800 3 ** –

Colours 15° 15°C 15°C 1000 1.5 ** –

Wool 40°C

Delicates 30°C

Synthetics 40°C



Dosing required  Dosing optional

Cotton - Test wash cycles in compliance with regulations 1061/2010

These are the reference programs for the energy label. Set this wash cycle with a temperature of 60°C. They are the most ecient programmes in terms of energy and water consumption for washing normally soiled cotton laundry. The actual water temperature may dier from the declared one.

For all Test Institutes

Long wash cycle for cottons: set wash cycle Cotton with a temperature of 40°C. Synthetic program along: set wash cycle Synthetics with a temperature of 40°C.

PRODUCT DESCRIPTION

1. Worktop

2. Detergent dispenser

3. Control panel

4. Door handle

5. Door

6. Water lter - behind plinth

7. Plinth (removable)

8. Adjustable feet (4)

- 40°C 800 1.5 ** –

- 30°C – 0.5 ** –

- 60°C 1200 3 195 –

* After programme end and spinning with maximum selectable spin speed, in default

** The duration of the programme is shown on the display.

The washer adapts water, energy and programme duration to your wash load

6th Sense - the sensor technology adapts water, energy and programme duration to your wash load.

DETERGENT DISPENSER

Main wash compartment

Detergent for the main wash, stain remover or water softener. For a liquid detergent it

is recommended to use removable plastic partition A (supplied) for a proper dosage.

If powder detergent is used, place the partition into slot B.

Prewash compartment

Detergent for the prewash.

Softener compartment

Fabric softener. Liquid starch.

  

 

   

This data may dier in your home due to changing conditions in inlet water temperature, water pressure etc. Approximate programme duration values refer to the default setting of the programmes, without options.

programme setting.

– – – – –

–



33 0,79 66

Pour in softener or starch solution only up to the “max” mark. Release button 

Press to remove tray for cleaning.

kWh

Energy

Residual

consumption

dampness % *

– – –



Total water lt

PROGRAMMES

For choosing the appropriate programme for your kind of laundry, always respect the instructions on the care labels of the laundry. The value given in the tub symbol is the maximum temperature possible for washing the garment.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen, synthetic bres and mixed bres.

White

For washing normally to heavily soiled towels, underwear, table and bed linen, etc in resilient cotton and linen. Only when the temperature is selected at 90°C the cycle is provided with a prewash phase before main washing phase. In this case it is recommended to add detergent both, in the prewash and main wash section.

Cotton

Normally to heavily soiled and robust cottons .

Cotton

For washing normally soiled cotton garments. At 60°C, this is the standard cotton programme and the most ecient in terms of water and energy consumption.

Sport

For washing lightly soiled sports clothing (tracksuits, shorts, etc.). For best results, we recommend not exceeding the maximum load indicated in the ‚‘‘PROGRAMME CHART‘‘. We recommend using liquid detergent , and adding the amount suitable for half-load.

Duvet

Designed for washing eiderdown padded items such as double or single duvets, cushions and anoraks. It is recommended to load such padded items in the drum with the edges folded inwards and not to exceed ¾ of the drum’s volume. For optimal washing, we recommend using a liquid detergent.

Jeans

Turn garments inside-out before washing and use a liquid detergent.

Spin & Drain

Spins the load then empties the water. For resilient garments. If you exclude the spin cycle, the machine will drain only

Rinse & Spin

Rinses and then spins. For resilient garments.

Rapid 30’

For washing lightly soiled garments quickly. This cycle lasts only 30 minutes, saving time and energy.

Colours 15°

This cycle helps protect colours by washing in cold water (15°C) and uses less energy to heat the water while still oering satisfactory wash results. Suitable for lightly soiled, unstained garments. This cycle oers wash results comparable to 40°c mixed at just 15°C

Wool

All wool garments can be washed using programme ‚“Wool“ even those carryng the “hand-wash only “ label. For best results, use special detergents and do not exceed max kg declaration of laundry.

Delicates

For washing particularly delicate garments. Preferably turn garments inside out before washing.

Synthetics

For washing soiled garments made from synthetic bres (such as polyester, polyacrylic, viscose, etc.) or cotton/synthetic blends.

FIRST TIME USE

To remove any manufacturing debris select the “Cotton” programme at a temperature of 60°C. Pour a small quantity of detergent powder into the main wash compartment of the detergent dispenser (maximum 1/3 of the quantity the detergent manufacturer recommends for lightly soiled laundry). Start the programme without adding any laundry.

DAILY USE

Prepare your laundry according to the recommendations in the “HINTS AND TIPS” section. Load the laundry, close the door, open the water tap and press the “ON/OFF” button to switch the wasching machine on, the “Star t/Pause” button ashes. Turn the programme selector to the desired programme and select any option if needed. The temperature and spin speed can be changed by pressing the « Temp. » button or the « Essorage » button. Pull out the detergent dispenser and add the detergent (and additives/softener) now. Observe the dosing recommendations on the detergent pack. Then close the detergent dispenser and press the “Start/Pause” button. The “Start/Pause” button will lights up and the door will be locked.

PAUSE A RUNNING PROGRAMME

To pause the wash cycle, press the “Start/Pause” ; the indicator light will go o and the remaining time on display ash. To start the wash cycle from the point at which it was interrupted press the button again.

OPEN THE DOOR, IF REQUIRED

After starting a programme, the “Door locked” indicator lights up to show that the door can not be opened. As long as a wash programme is running, the door remains locked. To open the door while a programme is in progress, press the “Start/Pause” to pause the programme. Provided the water level and/or temperature is/are not too high, the “Door locked” indicator light goes o and you can open the door. For example to add or remove laundry. Press the “Start/Pause” button again to continue the programme.

PROGRAMME END

The “Door locked” indicator light goes o and the display shows “End”. To switch o the washing machine after programme ends press the “ON/OFF” button, the lights goes o. If you do not press “ON/OFF” button, the washing machine will switch o automatically after about a half of an hour. Close the water tap, open the door and unload the washing machine. Leave the door ajar to allow the drum to dry.

OPTIONS

! If the selected option is incompatible with the programme set,

the incompatibility will be signalled by a buzzer (3 beeps) and the corresponding indicator light will ash. ! If the selected option is incompatible with another previously set option, only the most recent selection will remain active.

Start delay

To set the selected programme to start at a later time, press the button to set the desired delay time. Symbol lights on the display when this fuction is enabled. To cancel the delayed start, press the button again untile the value ‚‘‘0‘‘ is shown on the display.

FreshCare+

This option enhances washing performance by generating steam to inhibit the proliferation of the main bad odour sources inside the machine. After steam phase, the washing machine will perform gentle tumbling through slow rotations of the drum. FreshCare+ option starts after the cycle ends for a maximum duration of 6h and you can interrupt it at any time by pressing any button on control panel or turning the knob. Wait around 5 minutes before door can be opened.

Temperature

Every programme has a predened temperature. If you want to change the temperature, press the « Temp. » button. The value appears on the display.

Spin

Every programme has a predened spin speed. If you want to change the spin speed, press the « Essorage » button. The value appears on the display.

Demo mode

This appliance is equipped with Demo mode function. For more information see the USER MANUAL/ Demo Mode.

+ 2 hidden pages