Whirlpool EV 7130 INSTRUCTION FOR USE

GB EV 7130

PROGRAMME TABLE

	(1)	Programme duration
	Programme Selector	figures (guideline) are
	Spin Speed Selector	valid for maximum
		temperature wash with
	Intensive Wash Option	no special functions.
	1/2 Load Option
	Rinse Hold Option
	On/Off

Programme	Type of fabrics / Degree of soiling / Notes	Max.		Detergent and Additives													Options							Temperature	Maximum	Programme
		Load																							Spin Speed	time
			Pre-		Washing			Softener			Bleach			Intensive			Half Load				Rinse Hold					approx.
			wash											Wash
		kg																						°C	rpm	min (1)
Cotton with Prewash	Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard
	wearing and high temperature resistant cotton.	5.0	Yes		Yes																			60/90*	700	130
Pré lavage	The maximum load for heavily soiled washing is 3.5 kg.
Cotton	Moderately soiled sheets, tablecloths, underclothes, towels etc. in	5.0	—		Yes																			60/90*	700	115
Coton	hard wearing and high temperature resistant cotton.
Coloured	Averagely soiled blouses, shirts etc. made of polyester (Diolen,	2.0	—		Yes							—			—									60	700	100
Couleurs	Trevira); polyamide (Perlon, Nylon), or cotton blends.
Synthetics	Lightly soiled shirts, blouses etc., made of polyester (Diolen,	2.0	—		Yes							—			—									40	450	70
Synthé tiques	Trevira), polyamide (Perlon, Nylon) or cotton blends.
Rinse + Spin	This programme allows starch or softener to be added.	5.0	—		—							—			—									Cold	700	20
Rinç age	It is followed by an intensive spin cycle.
Spin	Programme for intensive spin cycle.	5.0	—		—			—			—			—			—			—				—	700	10
Essorage
Delicate	Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.).	1.5	—		Yes							—			—		—							40	400	55
Fragile
Wool	Machine washable woollens with pure new wool label.	1.0	—		Yes							—			—		—							40	400	45
Laine
Rinse + Spin	This programme allows starch or softener to be added.	1.5	—		—							—			—		—							Cold	400	15
Rinç age	It is followed by a gentle spin cycle.
Spin	Programme for gentle spin cycle.	1.5	—		—				—			—			—		—				—			—	400	5
Essorage
Drain	Drain only, without spin cycle.	—	—		—				—			—			—		—				—			—	—	3
Vidange

* For obtaining the 90° C temperature, press the “Intensive Wash” option button.

N.B.:

The excess of detergent in the dispenser could cause technical problems.

5019 100 01051

GB

ENERGY AND WATER CONSUMPTION DATA

	Programme		Temperature					Load			Water					Energy		Programme
																			time
				(°C)				(kg)				(l)				(kWh)			(min)
	Cotton		90				5.0			72					1.80			115
	Cotton		60				5.0			69					1.15			115
	Coloured		60				2.0			66					0.80			100
	Coloured		40				2.0			66					0.40			100
Synthetics + 1/2 Load			30				1.0			54					0.30			70
	Delicate		40				1.5			70					0.65			55
	Wool		40				1.0			70					0.55			45

Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual consumption may vary in comparison with the values specified in the table, because of differences in supply water pressure and temperature, the load and the type of wash.

ADDING DETERGENT AND ADDITIVES

Pour the detergent and additives into the respective compartments as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and starch

• Bleach

• Stain removers

• Anti-scale agents (water hardness 4)

Important Note:

•Do not fill beyond the “MAX” level mark.

•For programme with prewash: do not use liquid detergent.

•For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1 Turn the programme selector knob clockwise to the desired programme.

2.Turn the spin speed selector knob to the desired spin speed.

PRESS ANY DESIRED OPTION BUTTON(S)

“Intensive Wash” button

•This option allows to put up the washing temperature to 90° C instead of 60° C for the “Cotton” programmes.

•Especially suitable for heavily soiled laundry.

“Half Load” button

•Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the prewash and the rinse.

•Especially suitable for lightly soiled or small loads (reduce the quantity of detergent).

•Not suitable for high temperature programmes.

“Rinse Hold” button

•The laundry remains in the last rinse water, without progressing to the spin cycle to avoid creasing and prevent colours from changing.

•This option is especially recommended for the “Synthetics” or “Delicate” programmes.

•This option is perfectly suitable if you wish to postpone the spin or you don’t wish to spin the clothes.

Note: the programme selector stops on .

Terminate the “Rinse Hold” option

•Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle corresponding to the previously selected wash programme.

•If you do not wish to spin the clothes, switch off the appliance by pressing the On/Off button “ ”. The pilot light goes out. Turn the programme selector to the “Drain” position and switch on the appliance.

PROGRAMME START

Open the water inlet tap and press the On/Off button “ .”The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes.

If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

•The programme selector knob ” is at “STOP”.

1.Press the On/Off button “ ”. The pilot light goes out.

2.Cancel the options by pressing the appropriate buttons.

3.Turn the water supply tap off.

4.Wait for the door to unlock (about 1 minute).

5.Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1.Press the On/Off button “ ” to switch off the appliance. The pilot light goes out.

2.Select the new programme, spin speed and options.

3.Press the On/Off button “ ” to switch on the appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1.Press the On/Off button “ ” to switch off the appliance. The pilot light goes out.

2.Set the programme selector ” on “Drain”.

3.Press the On/Off button “ ” to start the “Drain” programme.

Only open the door when the programme selector “ ” is at “STOP” and the door is unlocked (after approximately 1 minute).

5019 100 01051