Whirlpool EURO 1400 INSTRUCTION FOR USE

GB EURO 1400

A. “Door open” indication

This washing machine is equipped
with automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Programme

Cotton

40 - 60 - 95 °C

Synthetics

40 - 60 °C

Sport

30 °C

Delicates

30 - 40 °C

Koch/

Buntwäsche

40 - 60 - 95 °C

Pflegeleicht

40 - 60 °C

Sport

30 °C

Feinwäsche

30 - 40 °C

Care

Labels

PROGRAMME CHART

H

C
D

J

E

Type of wash / Notes

- for temperature selection, respect the manufacturer's recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled and sweaty sportswear made of cotton jersey, microfibres of other artificial
fibres. This programme includes a prewash cycle, add detergent also to the prewash chamber.

Do not add any softener.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

F

E. Programme selector
F. “Start/Pause” button
G. Spin speed selector

A

H. Programme sequence indicator

B

I

G

Max.

Detergents and Additives Special options Max

Load

Pre-

Main

wash

kg

5.0

i

2.5

i

2.5 Yes Yes –

1.5

i

Softener Start

Wash

Yes

Yes

Yes

delay

Start-

vorwahl

i i i i i i i

i i i i i i i

i i i

and Start delay indicators

I. “Reset” button
J. “Start delay ” button

Pre-

Eco

wash

Vor-

wäsche

– –

i

Intensive

Öko

– –

rinse

Intensiv-

spülen

Rinse

hold

Spül-

stopp

i i i

i i

Variable

spin

Schleudern

Spin

Speed

rpm

1400

1000

1000

1000

1)

1)

1)

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

30 - 40 °C

Rinse & Spin

Spin Schleudern – In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme. 5.0 – – –

Gentle Spin Schonschleudern – In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme. 1.0 – – –

Drain Abpumpen – Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”. – – – – – – – – – – –

i : option / Yes : dosing required

1)

For improved garment care spin speed is restricted in these programmes.

Mischwäsche

40 °C

Snelle Wäsche

30 °C

Wolle

Kalt - 40 °C

Handwäsche

30 - 40 °C

Spülen &

Schleudern

Slightly to normally soiled textiles made of cotton and/or synthetics. 3.0 – Yes

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. 3.0 – Yes

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine
washable. If you select “Rinse hold” do not leave items to soak for too long.

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

If you select “Rinse hold” do not leave items to soak for too long. A very gentle spin is used in this
programme.

– Same as the last rinse and the final spin in the “Cotton” programme. 5.0 – –

1.0 – Yes

1.0 – Yes

i i

i i

i i

i i

i i

– –

– – –

– – –

– – –

– –

– – – –

i

– – – –

i

Whirlpool is a registered trademark of Whirlpool USA.

i i i

i i

i i

i i

i i i

5019 301 01014

1400

1400

1)

1000

1)

400

1400

1400

i

1)

1000

i

CONSUMPTION DATA

Programme

Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)

Cotton 95 5.0 49* 1.90 2:00
Cotton 60 5.0 44 0.95 2:10

Cotton with “Eco”** 60 5.0 44 0.85 2:20

Cotton 40 5.0 44 0.60 2:00
Synthetics 60 2.5 50* 0.70 1:30
Synthetics 40 2.5 45 0.55 1:15

Sport 30 2.5 59 0.45 1:30

Delicates 30 1.5 50 0.50 0:45

Daily load 40 3.0 45 0.45 1:00

Quick wash 30 3.0 40 0.40 0:30

Wool 40 1.0 55 0.60 0:45
Handwash 40 1.0 45 0.60 0:40
Handwash 30 1.0 45 0.50 0:40

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
** Reference Programme for Energy Label.

ADD DETERGENTS, CLOSE THE DOOR AND
SELECT THE PROGRAMME

Add detergents as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
Close the door and turn the programme selector to the
desired programme and temperature. The indication
lamp of the „Start/Pause“ button blinks and the
indication lamp of the predefined spin speed lights up.

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. Increases the cycle time by
approxymately 15 min.

• Do not use liquid detergent for main wash when
activating the Prewash option.

“Eco” button

• With a modified temperature profile and a slightly

prologned washing duration, the optimum
combination of excellent washing result and even

“Intensive rinse” button

• More water is added and rinse cycle is prologned.

• This option is particularly suitable for areas with very

soft water, washing baby linen and helps people
with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing
and prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.

• This function is particularly useful if you want to
postpone spinning to a later time, or if you want to
drain only.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” light in the programme
sequence indicator is on. The indication lamp next
to the “Start/Pause” button blinks.

Terminate the “Rinse hold” option:

• Press the “Start/Pause” button; the programme

will terminate automatically with the final spin cycle
for the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause” button.

lower energy consumption is achieved.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is

cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

START DELAY

The “Start delay” allows to run the machine at the
consumer's convenience, for example at night when
electricity is cheaper. Do not use liquid detergent when
activating “Start delay” option.

• Select programme, temperature and options.

• Press the “Start delay” button to select the delay

time by 1, 3, 6, 9 or 12 hours.

• Press the “Start/Pause” button.
The indication over the “Start delay” button lights
up and goes off when the programme starts.

• Once having pressed the “Start/Pause” button,
the countdown of the time delay begins. When the
programme starts, the start delay indicator light
goes off and is replaced by the programme sequence
indication.

• After the “Start/Pause” button has been pressed,
the number of hours preselected can be reduced by
pressing again the “Start delay” button.

• Do not use liquid detergent when activating the
Start delay.

To cancel the “Start delay”
..before you press the “Start/Pause” button:

• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:

• Press the “Reset” button for at least 3 second - the

start delay indicator light goes out.

PROGRAMME START

Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button
lights up. The programme sequence indicator shows the
current programme phase, running from left to right
through Wash, Rinse, Spin/Drain.
When the programme phrase is finised, the
corresponding indication goes out.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the door can be opened. As long
as a wash programme is running, the door remains
locked and must on no account be forced open.
In case you have an urgent need to open it during a
running programme, refer to “Cancel (Reset) a running
programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned: in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator

are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O”
position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start/Pause” button to pause the
programme. The lamp blinks.

2. Select the new programme (with temperature), any
options and another spin speed if you want.

3. Press the “Start/Pause” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END

The “Reset” button cancels a programme before the
end.

• Press the “Reset” button for at least 3 seconds.
Any existing water is drained out before the door
can be opened.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 01014