Whirlpool ETPV 9500 IN INSTRUCTION FOR USE
4gb66012.fm Page 1 Monday, December 1, 2003 5:44 PM
ETPV 9500 IN PRODUCT DESCRIPTION SHEET
DE GB IE FR NL IT
1.
Left front cooking zone
Ø 145mm, 1200 W
2.
Left rear double cooking zone
Ø 265/170mm, 2200/1400 W
3.
Central rear cooking zone
Ø 180mm, 1800 W
4.
Right rear cooking zone
Ø 145mm, 1200 W
5.
Right front double cooking zone
Ø 180/120mm, 1700/700 W
6.
Display
Important:
To avoid permanently damaging the glass
ceramic top, do not use:
- pots with bottoms that are not perfectly
flat
- metal pots with enamelled bottom.
Any aesthetic defects (scratches, surface marks, etc.) must be reported immediately
upon installation.
Use two or more people to move and install the cooktop.
Failure to do so can result in back or other injuries.
5019 419 66012
DIMENSIONS OF THE HOB (mm)
4gb66012.fm Page 2 Monday, December 1, 2003 5:44 PM
USING THE HOB
1-2-3-4-5. Power level display
6. Timer display (in minutes)
7-9. Second cooking zone button
8. Timer button
10. Safety lock button
11. ON/OFF button
Press the ON/OFF button to switch on the cooktop. For 10 seconds the display
will show a dash. If no cooking zone is switched on within 10 seconds, the hob
will automatically switch off.
To switch on the element you intend to use, press the corresponding + or -
button within 10 seconds. When the + button is pressed the display will show
power level 9, and when the - button is pressed it will show power level 4.
After this operation, adjust the temperature with the
To switch off an element, press the - button until
buttons.
+/-
appears. The
0
corresponding LED will switch off after 10 seconds.
You can also switch off an element by pressing simultaneously the + and -
buttons.
To switch off the hob, press the ON/OFF button . If all of the elements are set
to
, the hob will switch off after 10 seconds.
0
If an object is placed on the hob control panel or any liquid is spilt (water, milk,
etc.) the hob will automatically switch off and the symbol will light up.
If the hob features double zone cooking elements, switch on the second zone by
pressing the corresponding symbol for 3 seconds. After switching on the
second element, adjust the temperature with the
buttons.
+/-
When an element is switched off and the temperature is higher than 50°C, the H
(Hot) LED near the + button will switch on. The H (Hot) LED will remain alight
until the hob cools down to a safe temperature.
Loading...