Whirlpool ETN 4240 TF, ETN 4240 WS, ETK 4240 IN CH, ETN 4240 IN CH, ETK 4240 IN INSTRUCTION FOR USE

...
N C
GB
INTRODUCTION
BEFORE USING THE HOB
1. Clean the hob.
2. Switch on the hotplates to remove fumes and smells from the protective greases.
EVERYDAY USE
2. To switch off, turn the knob back to “0”.
Please read the instructions for use carefully, to become familiar with your hob.
16
M Y
N C
CONTENTS GB
CHARACTERISTICS page 18
BEFORE USING THE HOB page 19
TIPS FOR SAFEGUARDING THE ENVIRONMENT page 19
PRECAUTIONS AND GENERAL SUGGESTIONS page 19
2 ELECTRIC HOTPLATE HOB page 20
GLASS CERAMIC HOB page 21
TROUBLE SHOOTING GUIDE page 24
AFTER-SALES SERVICE page 24
INSTALLATION page 25
17
M Y
N C
CHARACTERISTICS
ETN 4240
2 ELECTRIC HOTPLATE HOB
- Electrical insulation Class 1.
- Protection against overheating of adjacent surfaces Type Y.
0
1
12
2
11
3
10
4
9
5
8
6
7
3 5 4
2
ELECTRIC HOTPLATES
1. Rapid electric hotplate ø 145 – 1500 W
2. Rapid electric hotplate ø 180 – 2000 W
CONTROL PANEL
3. Front hotplate control knob (1)
1
0
1
12
2
11
3
10
4
9
5
8
6
7
4. Rear hotplate control knob (2)
5. Hotplate ON indicator light
ETK 4240
GLASS CERAMIC HOB
- Electrical insulation Class 1.
2
- Protection against overheating of adjacent surfaces Type Y.
COOKING ZONES
1. “Hilight” cooking zone ø 145 – 1200W
2. “Hilight” cooking zone ø 180 – 1800W
CONTROL PANEL
3. Front zone control knob (1)
4. Rear zone control kno b (2)
5. Front zone residual heat indicator light (1)
1
0
1
12
2
11
3
10
4
9
5
8
6
7
18
0
1
12
2
11
3
10
4
9
5
8
6
7
7 63 4
5
M Y
6. Rear zone residual heat indicator lig ht (2)
7. Cooking zone ON indicator light
N C
BEFORE USING THE HOB
x
For best use of your hob, read the instructions for use carefully and keep them in a safe place.
x
This appliance must only be used for the purpose for which it was designed, i.e. for cooking foods. Any other use should be considered incorrect and therefore dangerous.
x
The manufacturer declines all responsibility for damage caused by unreasonable, incorrect or rash use of the appliance.
x
Do not try to alter the technical properties of the appliance, because this could be very dangerous.
x
Packaging materials (plastic bags, polystyrene pieces, etc...) must be stored out of the reach of children as they are potentially dangerous.
x
Check that the hob has not been damaged during transport. In doubt, consult a specialised engineer.
x
Please make sure that the installation and electrical connections are made by a qualified electrician following the manufacturer’s instructions and in compliance with local regulations in force.
TIPS FOR SAFEGUARDING THE ENVIRONMENT
1. Packaging
The packaging material is 100% recyclable and is marked with the recycling symbol type of material which must be taken to the local
to identify the
Ù
collection centres.
PRECAUTIONS AND GENERAL SUGGESTIONS
x
Before any cleaning or maintenance, switch off the electricity to the hob.
x
Risk of fire!
Do not leave inflammable material on the hob.
x
Make sure that the electrical cables of other appliances installed nearby cannot come into contact with the hob.
x
Keep children away when the hob is working.
2. Product
The hob has been manufactured with recyclable material. Dispose of it following the local regulations for the disposal of waste. Before disposing of it make it unusable by cutting off the supply cable.
EC Declaration of conformity
x
This hob is intended to come into contact with food products and conforms with European Directive 89/109/EEC.
x
This hob has been designed for use just as a cooking appliance. Any other use (heating rooms) should be considered incorrect and therefore dangerous.
x
This hob has been designed, constructed and put on to the market in conformity with:
- Safety requirements of the “Low Voltage” Directive 73/23/EEC and amendments;
- Protection requirements of the “EMC” Directive 89/336/EEC and amendments;
- Requirements of Directive 93/68/EEC.
n
19
M Y
Loading...
+ 9 hidden pages