Whirlpool DW681ES FP WH AA, DW691ED FP SS AA, DW681ES FP SS AA, DW691ED FP WH AA INSTRUCTION FOR USE
Dishwasher
User guide
Product Information
It is important to keep this manual in a safe place (for your record).
Date of purchase
Dealer/Retailer
Suburb
Country
Model No.
N.B. To find information on model numbers and serial numbers, look on the right inside edge of the
dishwasher door.
____________________________
______________________________________________________________
_________________________
____________________
______________________
Purchaser
Branch/Location
Town/City
Serial No.
__________________________
_____________________
__________________________
__________________________
INSTRUCTIONS FOR USE
BEFORE USING THE DISHWASHER/
CONNECTIONS
PRECAUTIONS AND GENERAL
RECOMMENDATIONS
HOW TO FILL THE RINSE AID DISPENSER
HOW TO FILL THE DETERGENT DISPENSER
CARE AND MAINTENANCE
3
BEFORE USING THE DISHWASHER/
CONNECTIONS
1. Removing the packaging and controls:
After unpacking, make sure that the dishwasher is
undamaged and that the door closes correctly . If in doubt,
contact a qualified technician or your local retailer .
Keep the packaging materials (plastic bags,
•
polystyrene parts, etc.) out of reach of children, as
they are potentially dangerous.
This dishwasher has been factory tested to ensure
•
it functions correctly.
Such testing may leave slight water marks that will
disappear with the first wash.
2. Water and electrical connections:
All water and electrical connections must be
carried out by a qualified technician in compliance
with the manufacturer’s instructions (refer to the
enclosed installation booklet) and Government
Regulations and Local Government By Laws.
The appliance must only be used in the household
for the prescribed uses.
Do not use the dishwasher if it has been damaged
in transit. Consult your local retailer or Fisher &
Paykel Service Centre.
(Refer to the separate installation
instructions booklet)
3. Water inlet and drain:
Observe any special regulations issued by Government
•
Regulations or Local Government By Laws.
Water supply pressure: 30 - 1000 kPa.
•
Make sure the inlet and drain hoses are kink-free
•
and are not crushed.
If the hose length is not sufficient, please contact
•
your local dealer or our Authorised Service Center.
The inlet hose must be securely clamped to the
•
water tap to prevent leaks.
Maximum water temperature is 60°C.
•
When installing the appliance, make sure the drain
•
water discharges correctly (if necessary, remove
the wire gauze from the sink siphon).
Fix the drain hose to the spigot with a clamp to
•
prevent it from coming off during operation.
For appliances with water-stop system only: If the
water connections are made correctly, the waterstop system safeguards your home against damage
caused by flooding.
The appliance is to be connected to the water
•
mains using new hose-sets. Old hose-sets should
not be reused.
4. Electrical connection:
Voltage information is shown on the rating plate
•
mounted inside the door on the right hand side.
Ensure the connections comply with the
Government Regulations and Local Government By
Laws.
The appliance must be earthed as prescribed by law.
•
Do not use extension leads or multiple adapters.
•
Before carrying out maintenance, disconnect the
•
mains plug.
If the supply cord is damaged, it must be replaced
•
by a Fisher & Paykel Dealer or Authorised Service
Centre or similarly qualified electrical tradesperson
in order to avoid a hazard.
Warning for models provided with LCD
display:
The mains plug must be positioned in an easily
accessible place.
EC Declaration of conformity
This appliance has been designed, constructed and
distributed in compliance with the safety
requirements of EC Directives:
73/23/EEC
•
89/336/EEC
•
93/68/EEC
•
Load capacity:
12 place settings.
4
Loading...