Whirlpool BMZE 4002 IN, BMZE 4002 SW, BMZE 4002 WS, WA PRIMELINE XL 24 INSTRUCTION FOR USE

40105455GB.fm Page 1 Thursday, May 8, 2008 5:07 PM

GB PROGRAMME CHART

A. “Door open” indication
This washing machine is equipped with

automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Programme

White Cotton /

Hygienic +

Coloured

Cotton

SuperEco SuperEco

Synthetics Pflegeleicht

Buntwäsche

Tempe-

rature

70 - 95 °C

20 - 60 °C

20 - 60 °C

20 - 60 °C

Care

Labels

L

J

Max

Load

- Respect the manufacturer’s recommendations on the care label

kg

7.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested

7.0

following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal

7.0

to be run overnight to additionally profit from the more favourable energy rates. To
avoid noise of spinning at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.0

polyamide (Perlon, Nylon) or blends with cotton.

Type of wash/Notes

C
D

G

H

}

A
B

I

MK

Detergents and additives Special options

Pre-

wash

—

E

Main

Softener Clean +

wash

Yes

Yes

Yes

3)

❉❉❉❉❉❉

3)

❉

3)

❉❉❉❉❉❉

❉

❉

F

Pre-

Clean +

wash

Vor-

wäsche

——

E. Programme selector
F. “Start” button
G. “Variable spin” button
H. Programme sequence indicator

I. “Reset” button
J. “Start delay” button
K. “Temperature” button
L. Display
M. “Favourite” button

Start

Rinse

Intensive

hold

rinse

Spül-

Intensiv

stopp

spülen

❉❉

Easy

ironing

Leicht

bügeln

—

delay

Start-

vorwahl

2)

❉

2)

❉

2)

❉

Variable

spin

Schleu-

dern

❉

❉

❉

Spin

Max
Spin

Speed

rpm

max.

max.

max.

Daily load Mischwäsche

Quick wash

30min

Jeans Jeans

Delicates Feinwäsche

Wool Wolle

Lingerie /

Handwash

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Gentle Spin Schonschleudern

Drain Abpumpen

optional / Yes : dosing required

❉

:

1)

For improved garment care, spin speed is restricted in these programmes.

2)

Do not use liquid detergent when activating the Start Delay.

3)

Do not use liquid detergent for the main wash when activating the Prewash option.

Black process 45.0° 100.0 LPI

Schnelle Wäsche

30min

Dessous /

Handwäsche

20 - 60 °C

20 - 30 °C
20 - 60 °C

20 - 40 °C
20 - 40 °C

20 - 40 °C

——
——

——
——

Slightly to normally soiled textiles made of cotton and/or synthetics.

4.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends

4.0

with cotton.
Normally soiled cotton jeanswear and garments made of robust jeanslike material

7.0

such as trousers and jackets.
Curtains and delicate clothing, dresses skirts, shirts and blouses.

1.5

Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for

1.0

machine washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Up to a temperature of 30°C, this programme is particularly suitable to treat
delicate lingerie (use of a laundry net strongly recommended).

1.0

This programme (40°C) is tested and approved by The Woolmark Company for
handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

7.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.0

programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”

1.0

programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse

—

Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the
washing of Woolmark garments labelled as “machine was h” or “hand wash” provided that the garments are washed
according to the instructions on the garment label and those issued in this programme chart. M0701

Yes

—

Yes

—

Yes
Yes

3)

3)

Yes

Yes

❉
❉

—

—

——

❉

❉
❉❉❉❉

❉
❉

❉

❉

——

——

—

❉❉

——

——

——

❉❉❉

——

❉

——
——

——

❉

——

❉

❉❉

—

—— — ———— —
—— — ———— —
—— — ———— ———

2)

❉

2)

❉

2)

❉

2)

❉

2)

❉

2)

❉

❉❉
❉❉

❉❉

max.

❉

max.

❉

max.

❉
❉

1000

❉

1000

400

max.
max.

1000

—

1)

❉

5019 401 05455

1)

1)

1)

40105455GB.fm Page 2 Thursday, May 8, 2008 5:07 PM

CONSUMPTION DATA

Programme

Temp e ratu r e

(°C)

White Cotton / Hygienic + 95 7.0 74

Coloured Cotton

***

60 7.0 54 1.19 2:20

Coloured Cotton 40 7.0 69 0.75 2:05

SuperEco 60 7.0 69 0.84 4:00
Synthetics 60 3.0 46
Synthetics 40 3.0 42 0.40 1:20

Daily load 40 4.0 48 0.50 1:00

Quick wash 30min 30 4.0 48 0.25 0:30

Jeans 40 7.0 86 0.75 2:20

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.55 0:40

Handwash 40 1.0 45 0.55 0:40

Lingerie 30 1.0 45 0.45 0:36

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the household

*

conditions applicable at that time.
To reduce the water temperature, some cold water is added at t he end of the main wash cycle, before the pump drains the water out.

**

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the
chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration
in hours and minutes as well as the predefined
temperature. The

temperature

“Temperature” button.

up; in case you want to set another spin speed, press the
“Variable spin” button.

“Start”

can be altered by pressing the

to the desired

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional option(s) is
not possible, the indication lights switch off automatically.
Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt)
sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to
a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak
for too long.

Load

lights

Water

(kg)

Energy

(l)

(kWh)

2.10 2:10

**

0.80 1:35

**

The programme stops to “Rinse hold” at the time the

Note:

“Rinse hold” light in the programme sequence indicator is on.
The indication lamp next to the

Terminate the “Rinse hold” option:

• Press the

• If you do not wish to spin the clothes, turn the programme

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and

• Increases the water quantity and the clothes are spun very gently .

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled

“Clean +” button

• Choose this option if you use an in-wash additive for stain

• Selectable for programmes “Cotton” and “Synthetics”; choose

• Add an appropriate amount of in-wash additive for stain

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen

“Start”

automatically with the final spin cycle for the present wash
programme.

selector to the “Drain” programme and press the
button.

water, washing baby linen and helps people with allergies.

“Daily load” programmes to make ironing easier.

but intermediate spin peaks remain during rinse. The
water is drained out only.

removal (powder, for example “Vanish”) - it will optimize
the additive’s efficiency to get better wash performance
and stain removal.

temperature of 30 or 40°C and use with maximum load.
removal (powder) to the main wash chamber, together

with your detergent (only use powder detergent with this
option). Respect the manufacturer’s dosing instructions.

basis.

Chlorine or perborate bleaches must not be used!

Approx. Programme Duration

(hours : minutes)

button blinks.

“Start”

button; the programme will terminate

*

“Start”

SAVE YOUR FAV OURITE PROGRAMMES

If there is a programme setting which you use frequently, the
appliance offers the possibility to save one setting for each
programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed
and option(s), push and hold the
at least 3 seconds. The lamp next to
blinks and then lights up - the programme setting is saved.

Next time you want to use your individual programme setting,
select the programme, push the
start by pushing

If you want to replace the saved programme setting by
another one:

• Push the programme button, select temperature, spin speed
and options as desired and then press and hold the

“Favourites”

saved programme setting will be replaced by the new one.

.

“Start”

button for at least 3 seconds. The previously

“Favourites”

“Favourites”

“Favourites”

button and

START DELAY

The “Start Delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper.
Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by
1 to 23 hours;

• Press the
The indication light over the “Start Delay” button starts
blinking, and the countdown of the delay time begins. During
the whole countdown, the light of the “Start Delay” button as
well as the dot on the display keep blinking.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.

• Once having pressed the
hours preselected can be reduced by pressing and holding
the “Start Delay” button. From 1 hour on, the delay time
can also be reduced in steps of 10 minutes.

To cancel the “Start Delay”
..before you press the “Start” button:

• Turn the programme selector to another position or press
the

“Reset”

..after having pressed the “Start” button:

• Press the
delay time disappears from the display .

button.

“Start”

button, the number of

“Start”

button.

button for at least 3 seconds - the start

“Reset”

PROGR AMME START

Open the tap and press the
over the
indicator shows the current programme phase, running from left
to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case,

an animation appears on the display

button lights up. The programme sequence

“Start”

button. The indication lamp

“Start”

.

button for

shortly

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights
to show that the door can be opened. As long as a wash
programme is running, the door remains locked and must on
no account be forced open. In case you have an urgent need to
open it during a running programme, refer to “Cancel (Reset)
a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault
in an electrical component. Refer to the “Troubleshooting
Guide” in your Instructions for Use; if the fault persists, contact
our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the
water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are
off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the
light blinks.

2. Select the new programme, temperature, any options
and another spin speed if you want.

3. Press the
continues at the same position where the previous
programme was interrupted. Do not add detergent for
this programme.

button to pause the programme. The

“Start”

button again. The new programme

“Start”

CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds. “rES”

“Reset”

appears on the display . Any existing water is drained out
before the door can be opened.

5019 401 05455

Black process 45.0° 100.0 LPI