Whirlpool AWZ 414/1 QUICK REFERENCE GUIDE

AWZ 414GB

“

On/Off” indicator light

“

On/Off” Button

“

Spin Speed Reduction” Button

“

Rinse and Hold” Button

“

Intensive Rinse” Button

“

Dryer Half Load” Button

“

Washing

“

Drying Time” Selector Knob

“

Washing Program” Selector Knob

Temperature” Selector Knob

Avoid touching the glass door during and immediately after running the drying cycle since it will be hot. Do not dry fabrics that have been treated with solvents or petroleum based products, sleeping bags, duvets or bulky clothing. Avoid drying clothing excessively in order to prevent creasing and difficult ironing. For hand-washed items, remove excess water using the highest spin speed before starting the drying cycle.

: option / Yes: add the detergent.

❉

Programme

selector

knob

6 A

Max. Load

washing

Programme Type of load/Notes

Cotton with prewash

Cotton

Coloured Cotton Average to heavily soiled, hard-wearing cotton or linen fabrics. 5.0 Max. 60°  yes

Quick

wash

Special rinse

for cottons

Drain +

Spin

Synthetic with

prewash

Synthetic

Rinse

Special rinse

for

synthetic fabrics

Drain +

Spin

Wool

Drain +

Spin

for woollens

Heavily soiled, hard-wearing cotton and linen fabrics (bedlinen, table linen, underwear, shirts etc.).

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton or linen.

Programme for treating laundry with starch and/or softener. The programme ends with an intensive spin cycle.

Drain, with final spin. Alternative method for unloading laundry earlier.

Heavily soiled shirts, blouses, aprons, etc. made of polyester (diolen, trevira), polyamide (perlon, nylon) or cotton blends.

Lightly to normally soiled blouses, t-shirts, aprons, etc. made of polyester (diolen, trevira), polyamide (perlon, nylon) or cotton blends.

Rinse program, ending with a spin cycle.

Programme for treating laundry with starch and/or softener. The programme ends with an intensive spin cycle.

“

Drain, with final spin. Alternative method for ending the

“

Wool” programmes and for unloading the laundry earlier.

Only machine washable woollens with Pure New Wool label.

If you select

Drain, with final spin. Alternative method for ending the and

“

Rinse and Hold” do not leave items to soak for too long.

“

Wool” programmes and for unloading the laundry earlier.

Synthetic”, “Delicate” and

“

Synthetic”, “Delicate”

Washing

temperature

selector Washing

5.0 Max. 90° yes yes

5.0 Max. 90°  yes

5.0 Max. 40°  yes

5.0   

5.0           

2.5 Max. 60° yes yes

2.5 Max. 60°  yes

2.5   

2.5       550  1.5 kg 30/40 50

1.0 Max. 40°  yes

1.0           

Detergent and Additives Options 1/2

Pre-

wash

Main wash

Fabric

Softener

Intensive

Rinse

❉❉

❉



Rinse

and

Hold



❉

Max.

load

Spin

speed

Reduction

1400

550

1400

550

1400

550

1400

550

1400

550

550  1.5 kg 30/40 50

550    

Drying

for

drying

Load

2.5 kg 70/100 120

❉

2.5 kg 70/100 120

❉

2.5 kg 70/100 120

❉

2.5 kg 70/100 120

❉

 2.5 kg 70/100 120

1.5 kg 30/40 50

❉

1.5 kg 30/40 50

❉

Approx

Time

Iron

Drying

Load

Approx

Time

Cupboard

Drying

Load

* drying times for guidance only. These times will be perfected with experience and use.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 20178

CONSUMPTION DATA

Programme

Temperature

Selector

()

Load

(kg)

Water

(l)

Energy

(kWh)

Approx.

Programme Duration

(hours:minutes)

1 - Cotton90° 5.0 57 1.85 2:28

2 - Cotton90° 5.0 50 1.072:08

3 - Cotton 60° 5.0 53 0.97 2:00

4 - Cotton 40° 5.0 53 0.60 0:40

5 - Synthetics60°2.5 60 0.83 1:15

6 - Synthetics60°2.5 60 0.42 1:00

7 - Wool 40° 1.0 61 0.32 0:48

The use of the prewash cycle increases programme duration by approximately 15 min. Consumption data was calculated based on normalized conditions in compliance with Standard IEC 60 456. The data on the

programme relation to the water supply pressure and temperature, the load and the type of wash. The drying times shown may vary based on the spin speed and type of fabric.

ADD THE DETERGENT, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add the detergent as described in the programme table or in the chapter the booklet.

1. Make sure that the

2. Open the water tap.

3. Set the

4. Set the

5. Set the

7.Check that the door is well closed and turn on t h e

SELECT THE DESIRED OPTIONS

Dryer half load” button

“

(depending on model)

Coloured Cotton 60°C”. Consumption data in the home may vary with respect to the values in the table in

“

Intensive Rinse” button

“

(depending on model)

 The quantity of water duration of the rinse cycle

“

Detergent and Additives” in

Stop

“

”

Programme Selector

Programme selector

to the desired

is set to

programme.

thermostat knob

to the desired

temperature.

spin selector knob

Special options

can be selected, if required.

washer-dryer by pressing the

to the desired speed.

ON/OFF

“

”

button. The indicator light comes on, indicating that the washer-dryer is on.

are increased.

 This option is especially recommended in areas

with extremely soft water, for baby linen and linen belonging to skin allergy sufferers.

Rinse and Hold” button

“

(depending on model)

only for synthetic and wool programmes

 The laundry remains in the final rinse water

without progressing to the final spin cycle to

avoid creasing and prevent colours from running.

 This option is particularly recommended for the

programmes

 This function is particularly useful if you want to

postpone spinning to a later time or when you do not wish to spin the clothes.

To terminate the (depending on the model)

synthetic and wool programmes only

 Press the Rinse and Hold button again; the load

will be spun according to the selected

programme.

Energy Label” refers to

“

Synthetics” or “Delicate”.

Rinse and Hold” option

“

If you do not wish to spin the clothes, turn the programme selector knob to the Drain cycle, after pressing the

Spin Speed Reduction” Button

“

No Spin” button.

Reduces or increases the spin speed from 1400 to

550.

DOOR LOCK

The door locks automatically after the programme start until the end of the programme. If the

Stop

“

programme selector is moved to the

”

position or if the electricity supply is interrupted, then after approximately two minutes the door is released. In this case do not open the door: because hot water could come out of the door.

CHANGING THE SELECTED PROGRAMME

To change a programme when a cycle has already begun:

1. Switch off the appliance by pressing the

ON/OFF

“

”

button.

2.Select the new programme.

3. Start the programme by pressing the

ON/OFF

“

”

button.

INTERRUPTING THE CURRENT PROGRAMME

To interrupt the selected programme and continue it at a later time:

1. Press the

“

”

button.

ON/OFF

2. After the desired interval h as pas s ed, pre s s the

ON/OFF

“

”

button again.

AT THE END OF THE WASH PROGRAMME

1. At the end of the programme the programme

Stop

“

selector moves to the

”

position.

2. To unload the machine wait for the door to

release (approx. 2 minutes).

3.Switch off the appliance, open the door and

unload the washing.

4. Close the water tap and leave the door ajar to

allow the drum to dry out.

SETTING THE DRYING CYCLE

1. Load the machine according to the maximum

drying load table. The drying function can only be used for c

otton and synthetic programmes (not wool) and starts when the knob reaches the programme stop mark. It is important that the laundry has been spun and was washed with water.

When the spin cycle is finished the programme selector moves to

Stop

“

”

3.Select a drying time based on the type of fabric (cotton/synthetic), amount of laundry and desired final results (iron/cupboard dry), using

Drying Time

“

the

4. Press the

“

”

knob.

Dryer Half Load

”

button.

5. Turn on the water tap, check the drain hose, use the

“

”

button to turn on (the

ON/OFF

indicator light goes on).

SETTING THE WASHING/DRYING CYCLE IN SEQUENCE

1. The sequential washing and drying function can only be used for energy-saving and synthetic programmes (not wool) and starts when the knob reaches the programme stop

mark.

2.Load the washer-dryer (according to the max. drying load table) and close the door

3.Select a drying time based on the type of fabric (cotton/synthetic), amount of laundry and desired final results (iron/cupboard dry), using

Drying Time

“

the

4. Press the

5. Set the

Washing Programme

“

”

knob.

Dryer Half Load

“

”

knob to the

button.

desired programme

6. Press the

“

”

button to start the

ON/OFF

drying cycle.

NOTES AND INDICATIONS FOR USE

CLEANING THE FILTER



To ensure smooth operation of the pump, check the filter regularly and clean it when necessary.

Whirlpool is a registered trademark of Whirlpool USA.

5019 301 20178