Page 1
Machine operation
Additional information (including troubleshooting and service) can be found in the individual chapters of the
instructions for use.
Sort laundry according to
care symbols:
Do not tumble dry
Suitable for tumble drying -
at low drying temperature
Suitable for tumble drying
Sort by:
Material thickness:
separate laundry according to weight (e.g. dry towels and thin underwear
separately).
Type of material:
Degree of drying:
Do not tumble dry:
with metallic decorations, bulky items such as sleeping bags, etc.
Whenever there is greater load than the dryer can handle,
Cotton (linen); synthetic textiles (easy care).
Cupboard dry, iron dry etc.
Woollens, silk, nylon stockings, delicate embroidery, fabrics
Preparing laundry
Opening door
Loading dryer
Selecting programme
Selecting options
(if available)
Starting dryer
Programme end -
unloading dryer
Check that all fastenings are closed and that pockets are empty. Please ensure that
there are no cigarette lighters in the wash. Turn laundry inside out.
Pull the door handle.
Place laundry loosely in the drum to achieve equal drying throughout. Then close
the door.
Select the drying programme required by turning the programme selector knob
(for information, refer to programme table).
Select the option required by pressing the corresponding button.
The indicator lamp above the relevant button lights up to confirm your selection. A
fast blinking led indicates a wrong selection is made (incompatible options). Press
the button again to cancel the option.
The drying programme is started by pressing the
relevant indicator lamp lights up.
Changing programme selection:
drying, the dryer stops. The
new programme, again press the
Interrupting programme:
button and open the door. Wait at least 5 minutes, to allow the laundry to cool
down, before you unload the dryer. For your safety the drying cycle stops
automatically if you open the door. To restart, after door opening, close the door
and press the
Warning:
items are quickly removed and spread out so that the heat is dissipated.
The final part of a tumble dryer cycle occurs without heat (cool down cycle) to
ensure that the items are left at a temperature that ensures that the items will not
be damaged.
“Start (Pause)”
Never stop a tumble dryer before the end of the drying cycle, unless all
T ake the laundry out of the dryer. The drying process is complete
End:
and the anti-crease phase has been reached (active).
Anti-Crease:
an automatic anti-crease cycle will operate for maximum 60 min. The
drum rotates at regular intervals to prevent the laundry from creasing.
If the programme selected is changed during
“Start (Pause)”
“Start (Pause)”
To interrupt a drying cycle, press the
button again.
If the laundry is not removed at the end of the drying cycle,
“Start (Pause)”
indicator lamp flashes. To operate the
button.
button. The
“Start (Pause)”
Set the programme selector knob to “ ”.
Switching dryer off
Please note:
thoroughly in plenty of water before drying. Never dry rubber objects or objects stained with vegetable oils in the dryer.
Only use additives/plastic items specified as dryer safe and rinse items that have been treated with stain remover
Cleaning the lint filter:
it. Brush lint using a soft brush or your fingertips. Close lint filter and push firmly
back into place.
Open door, pull lint filter up and out of machine and open
1
Page 2
Programmes / Drying levels
Overview of programmes Options
Type of te xt il e
Fabrics
Volume
of load
kg
Approximate
drying times
(in minutes)
Very
Wet
wet
load
load
Cotton
Mixed fabrics
Silk
Special
programme
Laundry is aired and
refreshed for 30 minutes
without heating.
Airing
Multi-layered, thick laundry such as: terry towels, dish cloths
and dry towels, bed linen, underwear, terry towelling bath
robes.
Similar types of laundry which do not require ironing such as:
dry towels, bed linen, underwear, baby clothes, T-shirts,
*
cotton socks.
Laundry which requires ironing such as: bed and table linen,
*
dry towels, T-shirts, polo shirts, work clothes.
Laundry with thick, multi-layered areas such as: bed and table
linen, track suits, anoraks, blankets.
Laundry which does not require ironing such as: shirts,
*
blouses, T-shirts, sportswear.
Laundry which requires ironing such as: trousers, dresses,
skirts, shirts, blouses.
Adjusted drying intensity for silk items labelled with such
as : trousers, shirts, blouses.
Adjusted drying intensity for jeans to reach homogenous
drying results.
Cotton or linen hot wash /
coloured laundry
Max. 7 kg
Synthetic, mixed fibre or cotton
easy care (ironing not required)
laundry
Max. 3.5 kg
Max. 1.5 kg
Max. 3 kg
3.0
7.0
3.0
7.0
3.0
7.0
1.0
3.5
1.0
3.5
1.0
3.5
X X X X X
X X X X X
X X X X X
X - X X X
X - X X X
X - X X X
95’
185’
80’
150’
60’
130’
30’
85’
25’
60’
20’
50’
80’
165’
60’
130’
50’
100’
25’
75’
20’
50’
15’
45’
1.5 X - X - - 60’ 45’
3.0 X - X - - 90’ 70’
- - - X - X - -
Completes drying for
min.3-5 full size textiles
(suitable for all fabrics).
times
Drying
* Test programme in accordance with EN 61121.
- X - X X X
2
Page 3
...you want to correctly
care for and clean your
dryer:
...you want to check the
dryer yourself first:
(If your machine is not
functioning correctly, please
check the following points
before phoning for the
customer service – also refer
to relevant chapter in the
instructions for use).
How to proceed if ...
Clean the filter at the end
of every cycle.
Please de-install once a
year the air hose and
remove the lint inside.
Drying takes too long
laundry is not dry enough.
The dryer will not operate
(after a power failure,
always press the “Start
(Pause)” button).
• Open the door.
• Pull the filter upwards.
• Brush lint using a soft brush or your
fingertips.
• Push the filter back into place.
• Has the correct drying programme
been selected?
• Was the inserted laundry too wet
(washing machine spin speed less than
1000 rpm?)
• Is the lint filter dirty (filter indicator
light on)?
• Is the room temperature too high?
•Are the “ ” and
“ ” indicator lamps lighting up?
The drying cycle is complete and the
laundry can be taken out.
• If the drying result does not meet your
expectation, select a more dry
programme.
• Is the plug properly inserted into the
mains electricity socket?
• Is there a power failure?
•Has the fuse blown?
• Is the door properly closed?
• Has a drying programme been
selected?
pressed?
“Start (Pause)”
button been
•Has the
• Is the lint filter clean?
Lint filter indicator lamp
on.
AFTER-SALES SERVICE
If the fault is still present once the above checks have been undertaken or should the fault occur for a second time, switch
the machine off. Please contact your after -sa les service repr esen tative (for mo re information, refer to the warranty
manual).
Please have the following details ready when calling your after-sales service representative:
• The nature of the fault.
• The dryer type and model.
• The service code (the number after the word Service on the
adhesive rating plate) on the right-hand side when the door is
open.
• Is the vent hose blocked?
• Is the outside vent hose adaptor
blocked?
3
Page 4
Before using the machine, please also read the instructions for use carefully!
AWZ 3520
Programme selector knob
The drying programme is selected by turning
this knob.
“Start (Pause)” button
The drying programme is started by pressing
this button. The indicator lamp flashes during
the selection phase and lights up during
drying.
Indicator lamps
Filter
The indicator lamp lights up when the filter
needs cleaning.
Clean the filter at the end of every cycle.
Time remaining display
Depending on the programme selected, once
the drying cycle has been started, a default
drying time is displayed. The time displayed is
corrected by a few minutes depending on the
volume, type and dampness of the laundry.
The drying time specified is a calculated
value which will be updated during the
drying programme.
Quick Reference Guide
Programme sequence
Overdry
protection
Options
Drying
Gentle
Reduces drying intensity (recommended for
delicate items).
Rapid Cotton
Shortens drying duration (recommended for
thin items of the same size).
Buzzer
Signals/sounds end of drying cycle.
Anti-
crease
+
GB
End
of cycle
The flashing lines indicate that the calculation is
running. The remaining time will be updated.
Overdry protection
The indicator lamp lights up when a humidity
controlled program is selected, to indicate
the working protection function. Function is
not active in time controlled programmes
20’, 30’, 40’, 60’, 90’ and “ ”.
Whirlpool is a registered trademark of Whirlpool USA
Anti-crease
Prevents laundry from creasing up to 12
hours. Buzzer and Anti-crease cannot be
selected together.
Delayed Start
Delays the start of the drying cycle by 1 to 12
hours. Each time the button is pressed, the
start time is delayed by 1 hour.
Then press the
confirm the final selection and to start the dryer.
The delayed start indicator lamp flashes and
the countdown counts down in 1-hour
intervals. The countdown is indicated by the
indicator lamp above the button flashing.
During the countdown, the drum will turn
from time to time to re-distribute the
laundry. To cancel or change the previously
set time delay, set the programme selector
knob to “ ” or open the door.
“Start (Pause)”
5019 307 01088
(Subject to technical modifications)
button to
4
Loading...