Whirlpool AWT 2259 INSTRUCTION FOR USE

AWT 2259

Programme Type of wash / Notes

Cotton with

Prewash

Cotton

Coloured

Quick Wash Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled.

Synthetics

Rinse + Spin

Spin

Delicate Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.).

Wool

Rinse + Spin

Spin

Drain

Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton.

The maximum load for heavily soiled washing is 3.5 kg.

Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.

Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.

Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

This programme allows starch or softener to be added.

It is followed by an intensive spin cycle.

Programme for intensive spin cycle.

Machine washable woollens with pure new wool label.

If the “Rinse Hold” option is selected don't leave the wash to soak for too long. This programme allows starch or softener to be added.

It is followed by a gentle spin cycle.

Programme for gentle spin cycle.

Drain only, without spin cycle. Alternative way to end programmes after a “Rinse Hold”.

“Cold” “Machine Off” “No Spin”

Max. load

5.0 Yes

5.0

2.0

5.0

2.0

5.0

1.5

1.0

1.5

——

Programme duration figures (guideline) are valid for maximum temperature wash with no special functions.

❉

: option / Yes: dosing required

Do not use liquid detergents.

Detergents and additives Options Temperature

Prewash Main

—

Softener Bleach Half

Wash

Yes

—

—————

Yes

—

————— —

————— — —

❉❉❉❉

❉❉❉❉ ❉

❉ ❉

❉

❉ ❉

❉

Load

—

——

—— —

——

❉❉ ❉❉ ❉❉

❉❉

Rinse

Hold

❉

Selector

Maximum

Speed

°C

Spin

rpm

Programme

time

approx.

min.

from to 90 500 130

from to 90 500 115

from to 60 500 100

from to 40 500 85

from to 40 500 70

500 20

— 500 15

from to 40 500 55

from to 40 500 45

500 15

500 10

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10031

ENERGY AND WATER CONSUMPTION DATA

Programme Temperature

Load

Water

Energy

Programme

time

(°C)

(kg)

(l)

(kWh)

(min)

Cotton 90 5.0 72 1.80 115

Cotton 60 5.0 72 1.15 115 Coloured 60 2.0 66 0.80 100 Coloured 40 2.0 66 0.40 100

Quick Wash + 1/2 Load 40 2.5 54 0.50 85

Synthetics + 1/2 Load 30 1.0 54 0.30 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the “Energy Label” refer to the programme “Coloured Cotton 60°C”. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)

1. Close the drum flaps and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the

“MAX“

level mark, as

follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

clockwise to

the desired programme.

4. Turn the

temperature knob

to the required

temperature.

“Half Load” button

• Reduces the water consumption in the “Cotton” and “Synthetics” programmes especially during the rinse.

• Especially suitable for lightly soiled or small loads (reduces the quantity of detergent).

• Not suitable for high temperature programmes.

“Rinse Hold” button

• The laundry remains in the last rinse water, without progressing to the spin cycle to avoid creasing and prevent colours from changing.

• This option is especially recommended for the “Synthetics” or “Delicate” programmes.

• This option is perfectly suitable if you wish to

postpone the spin or you don't wish to spin the clothes.

Note:

the programme selector stops on “”.

Terminate the “Rinse Hold” option.

• Press the “Rinse Hold” button again; the programme will terminate automatically with the spin cycle corresponding to the previously selected wash programme.

• If you do not wish to spin the clothes, switch off the appliance by pressing the

“On/Off”

button. The pilot light goes out. Turn the programme selector to the “Drain” position and switch on the appliance.

PROGRAMME START

Open the water inlet tap and select the desired spin speed, turning the spin speed and

“On/Off”

knob to the desired position (the indicated spin speed or “No Spin”). The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

• The programme selector knob is at “STOP”, the

pilot lamp lights.

1. Turn the spin speed knob to the Off position

“”. The pilot light goes out.

2. Cancel the options by pressing the appropriate

buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload

the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Turn the spin speed knob to the Off position

“” to switch off the appliance. The pilot light goes out.

2. Select the new programme, temperature and

options.

3. Turn the spin speed knob to the desired spin

speed to switch on the appliance. The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Turn the spin speed knob to the Off position “” to switch off the appliance. The pilot light goes out.

2. Set the programme selector on “Drain”.

3. Turn the spin speed knob to the desired spin speed to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is unlocked

(after approximately 1 minute).

NOTE AND INDICATIONS FOR USE

• After switching your washing machine on, it

does not start immediately: it needs some seconds in order to lock the door, fill water and then drum starts turning.

• Spinning has an interrupted start-up: the drum

starts and stops running several times, to improve spin efficiency and to better balance the laundry.

• At the end of the spinning cycle the drum goes

on reversing for some minutes: this helps you unloading the laundry.

• Do not exceed in detergents dosage: excessive

foam formation may prevent spinning.

• The turning of the drum is stopped in several

steps of the washing cycle due to optimization of energy consumption.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10031