Whirlpool AWT 2085 INSTRUCTION FOR USE

AWT 2085

PROGRAMME TABLE

Eco Option Rinse Intensive

Spin

Rinse Option Rinse Hold

Delicate

Option Prewash Wool Cotton Drain Coloured Cold Quick wash On/Off Synthetics

Programme Type of fabrics / Degree of soiling / Notes Max.

Cotton with

Prewash

Cotton

Coloured

Quick Wash

Synthetics

Rinse + Spin

Spin

Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton. The maximum load for heavily soiled washing is 3.5 kg.

Moderately soiled sheets, t ablecloths, underclothes, t owels etc. i n hard wearing and high temperature resistant cotton.

Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.

Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled.

Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.

This programme allows starch or sof tener to be added. It is followed by an intensive spin cycle.

Programme for intensive spin cycle. 4.5

Load

4.5 Yes Yes

4.5

2.0

4.5

2.0

4.5

Detergent and Additives Option Temperature

Pre-

Washing Softener Eco Intensive

wash

Rinse

Hold

❉❉ ❉ ❉

—

——

—— — — — — —

Yes

❉❉ ❉ ❉ ❉❉ ❉ ❉ ❉❉ ❉ ❉ ❉❉ ❉ ❉

❉

——

❉

Selector

°C

from to 90 800 130

from to 90 800 115

from to 60 800 100

from to 40 800 85

from to 40 500 70

(1)Programme duration

figures (guideline) are valid for maximum temperature wash with no special functions.

Maximum

Spin Speed

rpm

800 20

800 15

Programme time

approx.

min (1)

Delicate

Wool

Rinse + Spin

Spin

Drain

Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5 Machine washable woollens with pure new wool label.

If the “Rinse Hold” option is selected do n’t leave th e wash to soak for too long.

This programme allows starch or sof tener to be added. It is followed by a gentle spin cycle.

Programme for gentle spin cycle. 1.5

Drain only, without spin cycle. Alternative way to end programmes after a “Rinse Hold”.

1.0

1.5

—— —

—

——

Yes

N.B.: The excess of detergent in the dispenser could cause technical problems.

❉ ❉ ❉

—

——

————

———— —

from to 40 400 55

❉

from to 40 400 45

❉ ❉

400 15

400 10

5019 100 01020

ENERGY AND WATER CONSUMPTION DATA

Programme Temperature

(°C)

Cotton + Intensive Rinse 90 4.5 69 1.75 115

Cotton 60 4.5 57 1.03 115

Coloured + Intensive Rinse 60 2.0 66 0.80 100

Coloured 40 2.0 56 0.40 100

Quick Wash 40 2.5 54 0.50 85

Synthetics 30 1.0 54 0.30 70

Delicate 40 1.5 70 0.65 55

Wool 40 1.0 70 0.55 45

Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual consumption may vary in comparison with the values specified in the table, because of differences in supply water pressure and temperature, the load and the type of wash.

Load

(kg)

Water

(l)

Energy

(kWh)

Programme

time

(min)

ADDING DETERGENT AND ADDITIVES

Pour the detergent and additives into the respective compartments as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and starch

• Stain removers

• Anti-scale agents (water hardness 4)

Important Note:

• Do not fill beyond the “

MAX”

level mark.

• For programme with prewash: do not use liquid detergent.

• For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.

CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Turn the

2. Turn the

3. Turn the

programme selector knob temperature knob spin speed knob

to the required temperature.

to the required spin speed.

clockwise to the desired programme.

PRESS ANY DESIRED OPTION BUTTON(S)

“Eco” button

• The wash time is extended and the water temperature is reduced.

• This function saves about 30% in energy without compromising the excellent results of

the wash.

“Intensive Rinse” button

• The water level increases for improved rinsing efficiency.

• This option is particularly suitable for areas with very soft water when washing baby

linen and helps people with allergies.

• For improved garment care it is advised to use the option for the Cotton 90° C and the Coloured 60° C programme.

“Rinse Hold” button

• The laundry remains in the last rinse water, without progressing to the spin cycle to

avoid creasing and prevent colours from changing.

• This option is especially recommended for the “Synthetics” or “Delicate” programmes.

• This option is perfectly suitable if you wish to postpone the spin or you don’t wish to

spin the clothes.

Note:

the programme selector stops on .

Terminate the “Rinse Hold” option

• Press the “Rinse Hold” button again; the programme will terminate automatically with

the spin cycle corresponding to the previously selected wash programme.

• If you do not wish to spin the clothes, switch off the appliance by pressing the “On/Off”

button. The pilot light goes out. Turn th e prog ramme se lecto r to the “Drain” position and switch on the appliance.

PROGRAMME START

Open the water inlet tap and press the “On/Off” button. The pilot lamp lights up.

DOOR LOCK

During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.

PROGRAMME END

• The programme selector knob is at “STOP”.

1. Press the “On/Off” button. The pilot light goes out.

2. Cancel the options by pressing the appropriate buttons.

3. Turn the water supply tap off.

4. Wait for the door to unlock (about 1 minute).

5. Open the door and the drum flaps and unload the machine.

SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START

1. Press the “On/Off” button to switch off the appliance.

The pilot light goes out.

2. Select the new programme, temperature, spin speed and op ti ons .

3. Press the “On/Off” button to switch on the appliance.

The pilot light lights.

TO STOP, RESET A PROGRAMME BEFORE THE END

1. Press the “On/Off” button to switch off the appliance.

The pilot light goes out.

2. Set the programme selector on “Drain”.

3. Press the “On/Off” button to start the “Drain” programme.

Only open the door when the programme selector is at “STOP” and the door is unlocked (after approximately 1 minute).

5019 100 01020