Whirlpool AWT 2052 INSTRUCTION FOR USE

GB
AWT 2052
Delicati Freddo
Delicate Option Cold On/Off
PROGRAMME TABLE
(1) Programme duration
figures (guideline) are valid for maximum temperature wash with no special functions.
Programme Type of fabrics / Degree of soiling / Notes Max.
Cotton with Prewash
Prelavaggio
Cotton
Cotone
Coloured
Colorati
Quick Wash
Rapido
Synthetics
Sintetici
Rinse + Spin
Risciacquo
Spin
Centrifuga
Delicate
Delicati
Wool
Lana
Rinse + Spin
Risciacquo
Gentle Spin
Centrifuga Breve
Drain
Scarico Acqua
Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant cotton. The maximum load for heavily soiled washing is 3.5 kg.
Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature resistant cotton.
Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or cotton blends.
Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled.
Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton blends.
This programme allows starch or softener to be added. It is followed by an intensive spin cycle.
Programme for intensive spin cycle. 5.0
Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5
Machine washable woollens with pure new wool label. 1.0
This programme allows starch or softener to be added. It is followed by a gentle spin cycle.
Programme for gentle spin cycle. 1.5
Drain only, without spin cycle.
Load
kg
5.0 Yes Yes
5.0
2.0
5.0
2.0
5.0
1.5
—— —
Detergent and Additives Option Temperature
Pre-
wash
Washing Softener Bleach Delicate
——
—— —— —
——
——
Yes
Yes
Yes
Yes
Yes
Yes
❉❉ ❉ ❉❉ ❉
❉ ❉ ❉ ❉
❉ ❉ ❉
——
——
——
——
——
——
❉ ❉ ❉
Selector
°C
from “Freddo”
(cold) to 90
from “Freddo”
(cold) to 90
from “Freddo”
(cold) to 60
from “Freddo”
(cold) to 40
from “Freddo”
(cold) to 40
“Freddo” (cold) 550 20
from “Freddo”
(cold) to 40
from “Freddo”
(cold) to 40
“Freddo” (cold) 550 15
Maximum
rpm
550 130
550 115
550 100
550 85
550 70
550 10
550 55
550 45
550 5
Programme
time
approx.
min (1)
3
N.B. The excess of detergent in the dispenser could cause technical problems.
5019 100 01015
GB
ENERGY AND WATER CONSUMPTION DATA
Programme Temperature
(°C)
Cotton 90 5.0 72 1.80 115
Cotton 60 5.0 72 1.15 115 Coloured 60 2.0 66 0.80 100 Coloured 40 2.0 66 0.40 100
Quick Wash 40 2.5 70 0.55 85
Synthetics 30 1.0 65 0.30 70
Delicate 40 1.5 70 0.65 55
Wool 40 1.0 70 0.55 45
Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual consumption may vary in comparison with the values specified in the table, because of differences in supply water pressure and temperature, the load and the type of wash.
Load
(kg)
Water
(l)
Energy
(kWh)
Programme
time
(min)
ADDING DETERGENT AND ADDITIVES
Pour the detergent and additives into the respective compartments as follows:
Programme with pre and main wash
Main wash programme without prewash
Fabric softeners and starch
Bleach
Stain removers
Anti-scale agents (water hardness 4)
Important Note:
Do not fill beyond the “
MAX”
level mark.
For programme with prewash: do not use liquid detergent.
For programmes without prewash from cold to 40° C, it is recommended to use a liquid detergent to avoid whitish residues on the coloured laundry.
CLOSE THE DOOR AND SELECT THE PROGRAMME
1. Turn the
2. Turn the
programme selector knob temperature knob
to the required temperature.
clockwise to the desired programme.
PRESS ANY DESIRED OPTION BUTTON(S).
“Delicate” button
In case of fragile or delicate linen, this option shortens the time for which the drum rotates. The linen is treated more delicately and creasing and crumpling are reduced.
PROGRAMME START
Open the water inlet tap and press the “On/Off” button. The pilot lamp lights up.
DOOR LOCK
During the running programme, the door cannot be opened. The door locks automatically in all programmes. If the programme is stopped or if an electrical power failure occurs, the door unlocks automatically after about 1 minute.
PROGRAMME END
The programme selector knob is at “STOP”.
1. Press the “On/Off” button. The pilot light goes out.
2. Cancel the options by pressing the appropriate buttons.
3. Turn the water supply tap off.
4. Wait for the door to unlock (about 1 minute).
5. Open the door and the drum flaps and unload the machine.
SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER PROGRAMME START
1. Press the “On/Off” button to switch off the appliance. The pilot light goes out.
2. Select the new programme, temperature and options.
3. Press the “On/Off” button to switch on the appliance. The pilot light lights.
TO STOP, RESET A PROGRAMME BEFORE THE END
1. Press the “On/Off” button to switch off the appliance. The pilot light goes out.
2. Set the programme selector on “Drain”.
3. Press the “On/Off” button to start the “Drain” programme. Only open the door when the programme selector is at “STOP” and the door is unlocked (after approximately 1 minute).
5019 100 01015
Loading...