Whirlpool AWT 2050, AWT 2040 User Manual
GB
AWT 2040 / 2050
PROGRAMME TABLE
1/2 Load
Option
Prewash
Spin
Delicate
Cotton Wool
Coloured Drain
Quick wash Cold
Synthetics
Machine Off
Rinse No Spin
Programme Type of fabrics / Degree of soiling / Notes Max.
Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard
Cotton with Prewash
Cotton
Coloured
Quick Wash
Synthetics
Rinse + Spin
Spin
wearing and high temperature resistant cotton.
The maximum load for heavily soiled washing is 3.5 kg.
Moderately soiled sheets, tablecloths, underclothes, towels etc. in
hard wearing and high temperature resistan t cotton.
Averagely soiled blouses, shirts etc. made of polyester (Diolen,
Trevira); polyamide (Perlon, Nylon), or cotton blends.
Blouses, shirts, cotton blouses, dark coloured te rry towelli ng, jea ns,
etc. lightly soiled.
Lightly soiled shirts, blouses etc., made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or cotton blends.
This programme allows starch or softener to be added.
It is followed by an intensive spin cycle.
Programme for intensive spin cycle.
Load
wash
kg
5.0 Yes Yes
5.0
2.0
5.0
2.0
5.0
5.0
Detergent and Additives Option Temperature
Pre-
Washing Softener Bleach Half
—
—
—
—
——
—— — — — —
Yes
Yes
Yes
Yes
Load
❉❉ ❉
❉❉ ❉
❉
❉
❉
❉
—
—
—
—
❉
❉
❉
❉
(1) Programme duration
figures (guideline) are
valid for maximum
temperature wash with
no special functions.
Maximum
Spin
Speed
°C
from to 90 Max * 130
from to 90 Max * 115
from to 60 Max * 100
from to 40 Max * 85
from to 40 Max * 70
Max * 20
rpm
Max * 10
Programme
time
approx.
min (1)
Delicate
Wool
Rinse + Spin
Spin
Drain
Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5
Machine washable woollens with pure new wool label.
This programme allows starch or softener to be added.
It is followed by a gentle spin cycle.
Programme for gentle spin cycle.
Drain only, without spin cycle.
1.0
1.5
1.5
—— —
—
—
——
——
* Max: 400 for AWT 2040
500 for AWT 2050
N.B.: The excess of detergent in the dispenser could cause technical problems.
Yes
Yes
❉
❉
❉
—
—
——
——
——
—— —
—— ——
from to 40 Max * 55
from to 40 Max * 45
Max * 15
Max * 5
5019 100 01026
3
GB
ENERGY AND WATER CONSUMPTION DATA
Programme Temperature
(°C)
Cotton 90 5.0 72 1.80 115
Cotton 60 5.0 72 1.15 115
Coloured 60 2.0 66 0.80 100
Coloured 40 2.0 66 0.40 100
Quick Wash + 1/2 Load 40 2.5 57 0.55 85
Synthetics + 1/2 Load 30 1.0 55 0.30 70
Delicate 40 1.5 70 0.65 55
Wool 40 1.0 70 0.55 45
Programmes with prewash last about 15 minutes more than programmes without prewash. Water and energy
consumption values were measured in standard conditions in compliance with the Standard IEC 60 456. Individual
consumption may vary in comparison with the values specified in the table, because of differences in supply water
pressure and temperature, the load and the type of wash.
Load
(kg)
Water
(l)
Energy
(kWh)
Programme
time
(min)
ADDING DETERGENT AND ADDITIVES
Pour the detergent and additives into the respective
compartments as follows:
• Programme with pre and main wash
• Main wash programme without prewash
• Fabric softeners and starch
• Bleach
• Stain removers
• Anti-scale agents (water hardness 4)
Important Note:
• Do not fill beyond the
“MAX”
level mark.
• For programme with prewash: do not use liquid
detergent.
• For programmes without prewash from cold to 40° C, it is recommended to use a liquid
detergent to avoid whitish residues on the coloured laundry.
CLOSE THE DOOR AND SELECT THE PROGRAMME
1. Turn the
2. Turn the
programme selector knob
temperature knob
to the required temperature.
clockwise to the desired programme.
SELECT ANY DESIRED OPTION
“Half Load” button
• Reduces the water consumption in the “Cotton” and “Synthetics” programmes
especially during the rinse.
• Especially suitable for lightly soiled or small loads (reduces the quantity of detergent).
• Not suitable for high temperature programmes.
“No Spin”
• It excludes the spin function from the programme.
PROGRAMME START
Open the water inlet tap and select the desidered spin speed, turning the
Off knob
to the desidered position (the indicated spin speed or “No Spin”).The pilot lamp
lights up.
spin speed and On/
DOOR LOCK
During the running programme, the door cannot be opened.
The door locks automatically in all programmes.
If the programme is stopped or if an electrical power failure occurs, the door unlocks
automatically after about 1 minute.
PROGRAMME END
• The programme selector knob is at “STOP”.
1. Turn the spin speed knob to the Off position “ ”. The pilot light goes out.
2. Cancel the options by pressing the appropriate buttons.
3. Turn the water supply tap off.
4. Wait for the door to unlock (about 1 minute).
5. Open the door and the drum flaps and unload the machine.
SELECTING A NEW PROGRAMME, SPIN SPEED, OPTIONS AFTER
PROGRAMME START
1. Turn the spin speed knob to the Off position “ ” to switch off the appliance.
The pilot light goes out.
2. Select the new programme, temperature and options.
3. Turn the spin speed knob to the desidered spin speed to switch on the appliance.
The pilot light lights.
TO STOP, RESET A PROGRAMME BEFORE THE END
1. Turn the spin speed knob to the Off position “ ” to switch off the appliance.
The pilot light goes out.
2. Set the programme selector on “Drain”.
3. Turn the spin speed knob to the desidered spin speed to start the “Drain” programme.
Only open the door when the programme selector is at “STOP” and
the door is unlocked (after approximately 1 minute).
5019 100 01026
Loading...